X5
— 2 —— 1 —
LTECH LTECH
WWW.LTECH.CN
LT@LTECH.CN
Tel: +86 756 620 8811 Fax: +86 756 620 8833
44mm
30mm
175mm 86mm
36mm
86mm
170mm
t ou c h p a n e l
DX5 Dimming Touch Panel Manual DX5 Dimming Touch Panel Manual
warranty
5 years
DX5 Dimming Touch Panel
R4-5A CV Receiver R4-CC CC Receiver
Input Voltage: AC100~240V
Output Signal: RF 2.4G + DMX512
RF Remote Distance: 30m
Control Mode: 4 Zones Control
Input Voltage: DC5V~DC24V
Max Current Load: 5A × 4CH Max. 20A
Max Output Power: 100W/240W/480W(5V/12V/24V)
Working Temperature: -30℃~55℃
Package Size: L178×W48×H33(mm)
Weight(G.W.): 150g
Input Voltage: DC12V~DC48V
Output Voltage: DC3V~DC46V
Output Current: CC 350/700/1050mA×4CH
Output Power: 1.05W~48.3W×4CH Max 193.2W
Working Temperature: -30℃~55℃
Package Size: L178×W48×H33(mm)
Weight(G.W.): 165g
1. Technical Specs:
Working Temperature: -20℃~60℃
Package Size: L113×W112×H50(mm)
Weight(N.W.): 225g
R4-5A/R4-CC Receiver
2. Product Size:
Touch Panel
Install
Uninstall
3. Installation Instruction:
4. Key Functions: 5. Terminals:
ON/OFF
Brightness
Touch Slider
Scene-save Keys
4 Zones
Selection
Keys
Long press to save
current scene.
Long press to turn on/off the buzzer.
AC100-240V
Power Input Socket
DMX Signal
Output Socket
6. Operating Instruction for Receiver:
RUN
RUN
Current Selection
Switch
7. :The Learning ID Method
Canceling ID:
Short press “ID learning button” on the R4-5A/R4-CC receiver, the running light keeps
on. Then press any zone No. on the DX5 touch panel, the running light flickers
several times, activated. the receiver accept zone control.
Learning ID:
Att: Multiple receivers could be synced to each zone.
LED Lamp
Connection Socket
LED Lamp
Connection Socket
The Running Light
The Running Light
ID learning Button
ID learning Button
DC5V~24V
Power Input Socket
DC12V~48V
Power Input Socket
(Operation Table)
Long press “ID learning button” on the R4-5A/R4-CC receiver for 5s, the running
light flickers several times, canceled.