Lumens DC125 Quick start guide

DC125 – Firmware(FW) Upgrade Instruction
DC125 Firmware(FW) Update Manual
Before firmware upgrade, please check the original firmware version of unit
1. Connect DC125 with a PC through USB cable.
2. Check the original FW version of DC125 in [Camera Settings] of LadibugTM.
-If it’s DHU1xx, please download with DHU1xx FW.
-If it’s DHU2xx, please download with DHU2xx FW.
-If it’s DGM1xx, please download with DGM1xx FW.
Note: Wrong FW download will cause the unit not work.

DC125 – Firmware(FW) Upgrade Instruction
3. Run the [2088SFWriteTool.exe]
4. Press […] to browse the file and select the .bin file downloaded from website.
5. After the .bin file selected, please press [Download] to start the process.
-If original FW version is DHU1xx, please download with DHU1xx FW.
-If original FW version is DHU2xx, please download with DHU2xx FW.
-If original FW version is DGM1xx, please download with DGM1xx FW.
Note: Wrong FW download will cause the unit not work.

DC125 – Firmware(FW) Upgrade Instruction
6. When the process is finished, it will show “Success” in the status box, and then you
can close the screen.
**Please do not stop the running process which may cause the unit not work.
7. Check the FW version in [Camera Setting] of LadibugTM
8. Done.