Lumens DC155 User manual

DC155 Digital Visualizer
Quick Start Guide
English - 0

1. Package Content
DC155 & Remote Quick Start Guide &
User Manual Soft Bag (Big, Small)
Power Cord VGA Cable USB Cable
C-Video Cable RS232 Adapter DVI Adapter (Optional)
2. Product Overview
1. Auto Focus
English - 1
8.DIP Switch
7. Infrared rays area 9. Auxiliary Stand
5. I/O ports
3. Gooseneck
2. Lens
4. Lamp
6.Power/Control keypad

3. I/O Connection
3.1 Connecting VGA out to Monitor or Projector
VAG Out Monitor
Projector
3.2 Connecting DVI out to Monitor or Projector
DVI Out Monitor
Projector
3.3 Connecting C-Video to TV
DIP Switch (NTSC)
off
on
off
on
DIP Switch (PAL)
C-Video TV
【Notice】NTSC Setting: USA、Taiwa n、Panama、Philippine、Canadian、Chile、
Japan、Korea、Mexico
PAL: Besides above listed countries
3.4 Connecting VGA in to Computer
VGA in PC Notebook
English - 2

【Notice】DVI to VGA adapter (optional) cable must be used.
No VGA output once C-Video output is turn on.
3.5 Connecting USB to Computer
Connect to USB port then install the supplied queue program. Please refer to
Software user’s manual.
USB PC Notebook
【Notice】Don’t connect the Digital Visualizer to PC until USB Driver has been
installed properly.
3.6 RS232 to Computer
Connect to RS232 port then execute RS232 command.
PC Notebook
3.7 Plug in the power outlet
English - 3
AC In AC Outlet

4. Start to use
4.1 Turn on the Digital Visualizer
Remote
Keypad
English - 4
4.2 Auto-adjust the optimum image

５. Major Functions
5.1 Select Input Source
The default input source is set as "Digital Visualizer", press 『Source』to switch.
5.2 Zoom in / out
Keypad Remote
5.3 Auto Focus
English - 5
Goose-head Remote

5.4 Brightness Adjustment
5.5 Capture & Play Image
Capture Live Image or Play the captured image
5.6 OSD Menu
English - 6
Keypad Remote
*More detail functions of full Control Menu (OSD Menu), please read the user manual..