Lumens CL510 Quick start guide

1
CL510 Firmware Upgrade Instruction
1. Before FW upgrade, please check the current FW version of CL510.
[Menu][Setting][Advanced][Firmware Version]
If PVL1xx, please download PVL1xx version.
If PVL2xx, please download PVL2xx version.
If PVL3xx, please download PVL3xx version.
*[Note] Different FW code can’t be upgraded.
2. Save the proper FW file in the USB Disk.
3. Connect CL510 with a Monitor/ Projector and power on the unit.
4. Insert the USB Disk into the USB port of CL510.
5. Call the Service Menu.
Press “[Freeze]> [Delete]> [Enter]” in sequence to show the Service Menu.
Service Menu：press “ Freeze Delete Enter ” in sequence
1
2
3

2
6. Go to [ISP] page, select [Firmware Upgrade], and press [Enter].
7. Check the FW version and press [Yes] to start upgrade.
Current version: current FW version of CL510
New version: the latest FW version in USB disk.
*[Note] if two more firmware files co-exist in the USB disk, the unit will always detect
the latest version automatically.
8. Restart the CL510 after upgrade
After upgrading, following prompt will pop-up and please restart the unit.