Lumens NDI VC-A50PN User manual

1
VC-A50PN
Camera Installation Guide
Please read all instructions prior to attempting your NDI®|HX camera. Be advised that a
current Microsoft Windows®computer or device is required to complete the upgrade process.
Download & install the NDI®|HX driver
•Follow this link to download your NDI®|HX driver from the NewTek
website.
http://new.tk/NDIHX-Driver-Win
•Install the driver on your Windows®device.
Note: This will also install NewTek NDI®Studio Monitor
Connect VC-A50PN with NDI®|HX
•With the NDI®|HX driver installed on your Windows®device, ensure that
both your Windows®device and camera are powered and connected to the
same local network via standard Ethernet cable.
If you are using a switch (without a router), you may need to manually
configure the network settings on your Windows®computer or device.
•From your Windows®computer or device, open the NewTek NDI®Studio
Monitor application (installed with your NDI® |HX driver) to finish the process.
•Click the menu icon in the upper-left corner to view all the available NDI®
sources, then locate and select your camera.
IMPORTANT: Your camera must be connected to the same local network as
the Windows®computer or device with your NDI®|HX driver installed to proceed.

2
•Configure and control your camera using the on-screen user interface.
Enjoy the World of IP Video.
Lumens is the registered trademark of Lumens Digital Optics Inc. Changes in specification or
design may be done without notification.