Lumens VC-A70H User manual

VC-A70H
(PTZ Video Camera)
Installation Guide - English
[Important]
To download the latest version of Quick Start Guide,
multilingual user manual, software,
or driver, etc., please visit Lumens
http://www.MyLumens.com

English - 1
Table of Contents
Copyright Information....................................................................................................3
Chapter 1 Safety Instructions........................................................................................4
Precautions..................................................................................................5
FCC Warning................................................................................................5
EN55022 (CE Radiation) Warning...............................................................5
Chapter 2 Package Contents .........................................................................................6
Chapter 3 Product Overview..........................................................................................7
3.1 Overview.............................................................................................7
3.2 Description of LED indicator...............................................................7
Chapter 4 Instruction for installation ............................................................................8
4.1 Preparation before installation............................................................8
4.2 Instruction for installation....................................................................8
4.3 Connecting the device......................................................................17
Chapter 5 Remote Control and Setting Menu.............................................................19
5.1 Functions of remote control..............................................................19
5.2 Setting Menu ....................................................................................20
Chapter 6 Descriptions of Major Functions................................................................27
6.1 I would like to switch to VC-A70H ....................................................27
6.2 I would like to set the Digital Output (RGB, YUV)............................27
6.3 I would like to enable the Tally Mode function..................................27
6.4 I would like to hide the preset image switch (Motionless Preset).....27
6.5 I would like to save the current lens position data............................28
6.6 I would like to clear the saved position data.....................................28
6.7 I would like to turn on the back light compensation function............28

English - 2
6.8 I would like to adjust the shooting angle of the lens.........................28
6.9 I would like to zoom in/out images ...................................................28
6.10 I would like to adjust the focal length ...............................................29
6.11 I would like to adjust the AF speed...................................................29
6.12 I would like to set the image mode...................................................30
6.13 I would like to freeze images............................................................30
6.14 I would like to rotate the image.........................................................30
6.15 I would like to change the camera direction.....................................30
6.16 I would like to display the current status ..........................................30
6.17 I would like to reset to the original setting........................................30
Chapter 7 DIP Switch Setting.......................................................................................32
7.1 DIP SWITCH ....................................................................................32
7.2 RS-422 Connection..........................................................................34
Chapter 8 Troubleshooting ..........................................................................................36

English - 3
Copyright Information
Copyrights © Lumens Digital Optics Inc. All rights reserved.
Lumens is a trademark that is currently being registered by Lumens Digital Optics Inc.
Copying, reproducing or transmitting this file is not allowed if a license is not provided by
Lumens Digital Optics Inc. unless copying this file is for the purpose of backup after
purchasing this product.
In order to keep improving the product, Lumens Digital Optics Inc. hereby reserves the
right to make changes to product specifications without prior notice. The information in this
file is subject to change without prior notice.
To fully explain or describe how this product should be used, this manual may refer to
names of other products or companies without any intention of infringement.
Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any possible
technological, editorial errors or omissions, nor responsible for any incidental or related
damages arising from providing this file, using, or operating this product.

English - 4
Chapter 1 Safety Instructions
Always follow these safety instructions when setting up and using the PTZ Video Camera:
1 Operation
1.1 Please use the product in the recommended operating environment.
1.2 Do not place the product in tilted position.
1.3 Do not place the product on an unstable trolley, stand or table.
1.4 Do not use this product near water or source of heat.
1.5 Use attachments only as recommended.
1.6 Use the type of power source indicated on the PTZ Video Camera. If you are not
sure of the type of power available, consult your distributor or local electricity
company for advice.
1.7 Always take the following precautions when handling the plug. Failure to do so
may result in sparks or fire:
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
1.8 Do not overload wall sockets, extension cords or multi-way plug boards as this
may cause fire or electric shock.
1.9 Do not block the slots and openings in the case of PTZ Video Camera. They
provide ventilation and prevent the PTZ Video Camera from overheating.
1.10 Except as specifically instructed in this User Manual, do not attempt to operate
this product by yourself. Opening or removing covers may expose you to
dangerous voltages and other hazards. Refer all servicing to licensed service
personnel.
1.11 Unplug the PTZ Video Camera from the wall outlet and refer servicing to licensed
service personnel when the following situations happen:
If the power cords are damaged or frayed.
If liquid is spilled into the Product or the Product has been exposed to rain or water.
2 Installation
2.1 For security considerations, please make sure the standard hanging rack you
bought is in line with UL or CE safety approbations and installed by technician
personnel approved by agents.
3 Storage
3.1 Do not place the Product where the cord can be stepped on as this may result in
fraying or damage to the lead or the plug.
3.2 Never push objects of any kind through cabinet slots. Never allow liquid of any
kind to spill into the Product.
3.3 Unplug this product during thunderstorms or if it is not going to be used for an
extended period.
3.4 Do not place this product or accessories on top of vibrating equipment or heated
objects.
4 Cleaning
4.1 Unplug all the cables before cleaning. Use a damp cloth for cleaning. Do not use
liquid or aerosol cleaners.
5 Remote control (if the accessories are equipped with remote control)
5.1 Using an incorrect battery type in the remote control may result in breakdown.
Follow local instructions on how to dispose of used batteries.

English - 5
Precautions
Warning: To reduce the risk of fire or electric shock, do not expose this appliance to
rain or moisture.
Unplug this product during thunderstorms or if it is not going to be used for an extended
period.
Caution: To reduce the risk of electric shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to licensed service personnel.
This symbol indicates that
this equipment may contain
dangerous voltage which
could cause electric shock.
This symbol indicates that
there are important
operating and maintenance
instructions in this User
Manual with this unit.
FCC Warning
This PTZ Video Camera has been tested and found to comply with the limits for a Class A
digital device, pursuant to Article 15-J of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a commercial installation.
This digital apparatus does not exceed the Class A limits for radio noise emissions
from digital apparatus as set out in the interference-causing equipment standard
entitled "Digital Apparatus," ICES-003 of Industry Canada.
Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux
appareils numeriques de Classe A prescrites dans la norme sur le material brouilleur:
"Appareils Numeriques," NMB-003 edictee par l'Industrie.
EN55022 (CE Radiation) Warning
This product is intended for use in a commercial, industrial, or educational environment. It
is not intended for residential use.
This is a Class A product. In a residential environment it may cause radio interference, in
which case the user may be required to take adequate measures. The typical use is in a
conference room, reception room or hall.
Note
Risk of Electric ShockPlease do
not open it by yourself

English - 6
Chapter 2 Package Contents
VC-A70H Instruction for installation Remote Control

Power Cord Power Adapter RS-422 Connector
Appearance may vary
depending on
country/region
Metal Plate A Metal Plate B M3 Screws

English - 7
Chapter 3 Product Overview
3.1 Overview
1. Tally indicator 2. Camera lens
3. Power LED indicator 4. Standby LED indicator
5. HDBaseT output 6. Power input
7. IR SELECT 8. OUTPUT Switch
9. Camera Address Selectors 10.RS-232 output
11.RS-232 input 12.RS-422 Connection
13.HDMI Output
3.2 Description of LED indicator
3.2.1Power:
3.2.1.1 No Light: Power off
3.2.1.2 Green light: In use
3.2.1.3 Flickering green: Signal from the remote control is received; the
indicator flickers every 0.5 second
3.2.2Standby：
3.2.2.1 Orange: In standby mode
3.2.2.2 No Light: Power on
3.2.2.3 Green light: HDBaseT and HDMI are connected
3.2.2.4 No Light: HDBaseT is connected
Front View Back View

English - 8
Chapter 4 Instruction for installation
4.1 Preparation before installation
Installation and connection of VC-A70H PTZ Video Camera requires special skills.
To install by yourself, please follow necessary steps, ensure steady and tight
installation of the device, and pay attention to your safety to avoid any accident.
4.1.1 Ensure the safety of the installation environment. Please do
not install the device on unstable ceiling or in a place where
the device is in danger of falling to avoid any accident.
4.1.2 Please check whether accessories in the box are complete
or not. Please contact the supplier for any shortage, and
make sure to keep the accessories in the box intact.
4.1.3 Please choose a proper place for installation of VC-A70H in
advance. Please determine an installation place according
to the following requirements
4.1.1.1 Confirm the position for the object to be captured.
4.1.1.2 Confirm whether the VC-A70H is set at a proper distance from
other light sources.
4.2 Instruction for installation
4.2.1 I would like to install VC-A70H on the desk
4.2.1.1 Precautions for installation
Please install the machine on a flat desk
Do not grab the camera head by hand when handling the device
Do not rotate the camera head by hand. Improper rotation may result in
breakdown of the camera

English - 9
4.2.1.2 Installation steps
1. Please adjust DIP switch at first prior to installation
<Remark> Please refer to Chapter 7 DIP Switch Setting for the
relevant descriptions on DIP switch.
2. Place the camera on a flat desk directly to ensure the normal vertical
and horizontal operation of the machine
4.2.2 I would like to install VC-A70H on the ceiling
4.2.2.1 Prepare for the parts and equipment required during the
installation
1. Accessories of VC-A70H in the box (metal plates A, B and M3 screw x 7)
2. Screw for locking on ceiling mounted hanger x 4
3. Drilling machine, screw driver, ladder

English - 10
4.2.2.2 Camera Size
Length x Width x Height : 174 x 186.8 x 170.8 mm
Weight : 2.0 Kg
4.2.2.3 Max. rotation dimension of camera

English - 11
4.2.2.4 Size Diagram
1. Metal plate B - ceiling side
Metal plate B locking
screw Metal plate B locking bolt
Metal
p
late B - ceilin
g
side
M3 threaded hole
M3 threaded
hole
M3 threaded
hole

English - 12
2. Metal plate A - machine side
Metal
p
late A - machine side
Metal plate A locking
screw

English - 13
3. Bottom of machine

English - 14
4.2.2.5 Precautions for installation
1. Before installation, please confirm the orientation of the machine
relative to the object to be captured
2. It is recommended that the machine should be set at a distance of
more than 1 meter away from the object to be captured. Please adjust
for a best distance according to the magnification of the lens
3. The machine (including metal plates) is weighed at about 2.5 kg. If it is
to be installed on the ceiling, please use the hanger that has obtained
UL security approval to prevent the machine from falling down.
4. Please check whether the camera is installed securely on a regular
basis
4.2.2.6 Installation steps
1. Please adjust resolution on DIP switch at first
<Remark> Please refer to Chapter 7 DIP Switch Setting for the
relevant descriptions on DIP switch.
2. Fix the metal plate A on the machine base with 4 M3 screws
1 meter↑

English - 15
3. Lock the metal plate B on ceiling mounted hanger
※Caution:
(1) Please use the hanger that has obtained UL security approval
(2) Please reserve the hole for the connecting wires of the camera
4. Combine the metal plate A and the metal plate B
(1) Push the metal plate A up to the ceiling and then to the right to latch
the metal plate B
(2) Fix with 3 M3 screws

English - 16
4.2.2.7 How to remove
1. Remove the connecting wires from the camera
2. Uninstall the camera together with the ceiling, loosen the three screws
that fix the metal plates A and B and push to the left to remove the
machine
3. Then remove the screws on the hanger and the machine

English - 17
4.3 Connecting the device
4.3.1 Image Output
4.3.1.1 Connecting to an HDTV/computer monitor (HDMI)
4.3.1.2 Connecting to a HDBaseTAdapter
* PoE Power Supply is available for this device. HDBaseT
Adapter may be enabled without connecting to a power cord
HDMI Cable
Monitor or HDTV
HDBaseT Cable
HDBaseTAdapter

English - 18
4.3.2 Controlling VCs with the computer
4.3.2.1 Connecting to one computer for connection between VCs
(RS-232 in/out)
<Remark> With RS-232 in/out, at most 7 VCs can be connected.
4.3.2.2 Connecting to one computer for connection between VCs
(RS-422)
<Remark> Please refer to 7.2 RS-422 connection for the RS-422
connection instructions.
<Remark> With RS-422, at most 7 VCs can be connected.

English - 19
Chapter 5 Remote Control and Setting Menu
5.1 Functions of remote control
<Remark> The below functions are listed alphabetically.
Item Description
,,,Move the lens
Back Light Turn on/off back light compensation
Camera
select Select 1 ~ 3 VC-A70H
Focus-
Manual /
Far/Near
Turn on manual focus to adjust the focal
length
Focus-Auto Auto focus
Freeze Freeze the screen
Home-Enter Go back to the main page / Execute
Info Status information
L/R
Direction Set L/R Direction / OFF / Normal
Menu Display OSD menu
Mirror Rotate the image (OFF / Mirror / Flip /
Mirror + Flip)
Pan/Tilt
Reset Clear the Pan / Tilt setting
Picture Switch image effect (OFF / B&W)
Power Power Switch
Preset Appoint an ID (0 ~ 9) to save the current
position data
Reset Appoint an ID (0 ~ 9) to delete the
current position data
Zoom-Fast Adjust image size
Zoom-Slow Fine-tune image size