Lumens VC-A71SN User manual

1.Please adjust the resolution on DIP SWITCH prior to installation.
(Please refer to )
2.Remove 4 pieces of foot pads on the bottom of the camera by
rotating the foot pads counterclockwise.
*Please keep the foot pads properly after removal and store them for future use.
3.Fix the metal plate A on the machine base with 4 M3 silver screws.
2. Instruction on DIP SWITCH setting
4.Lock the metal plate B on ceiling mounted hanger
*Caution:
(1) Please use the hanger that has obtained UL security approval.
(2) Please reserve the hole for the connecting wires of the camera.
5.Combine the metal plate A and the metal plate B
▼Push the metal plate A up to the ceiling and then to the right to latch
the metal plate B.
▼And then secure with 2 M3 silver screws and 1 M3 black screw.
black
screw
2.2 IR SELECT
ID
Setting
1
2
3
2.1 OUTPUT SWITCH
Setting
Output Mode
0
2160p/59.94
1
2160p/50
2
2160p/29.97
3
2160p/25
4
1080p/59.94
5
1080p/50
6
1080p/29.97
7
1080p/25
8
720p/59.94
9
720p/50
A
Reserved
B
Reserved
C
1080i/59.94
D
1080i/50
E
Reserved
F
Reserved
9
8
A
7
B
6
C
5
D
4
E
3
2
F
1
0
21 3
The factory setting for the
resolution is 2160p/59.94
After the IR SELECT is configured,
it can be switched from the Camera
Select on the remote control
VC-A71SN Quick Installation Guide
metal plate A
www.MyLumens.com
Copyright ©2021 Lumens Digital Optics Inc. All rights reserved.
5100450-50 JUL. 2021
Kensington
Lock Port
Ethernet Output
Switch
RS-422DC12V
Input
Audio In
IR
SELECT
USB 3.0 RS-232
Output
12G-SDI
Output
RS-232
Input
HDMI 2.0
Output
2. Instruction on DIP SWITCH setting
1. A view of the camera's I/O interface 3. Install the camera on the ceiling

Open the browser, enter the camera IP address, enter the account
and password, you can enter the web page to set and control the
camera.
●
● Access power by using a router that supports PoE or connecting
to a hub with a network cable
※ VC-A71SN supports PoE++(IEEE802.3bt)
Connect the DC12V power adapter for power supply
CameraCameraCamera
CAT6 network cable CAT6 network cable
CAT
network cable
6
Router
VS-KB30 Computer
CAT6 network cable
Router Camera
CAT6 network cable
Account: admin
Password: 9999
Connect a single or multiple units of VC-A71SN, the control keyboard
and the computer to the same router; use the control keyboard to
control VC-A71SN through IP; and use the computer to view the
images.
* [MENU] => [Ethernet]
=> [IP Address] on the remote control
*If it is not connected to a DHCP router, the default IP address is
192.168.100.100
The IP address can be verified by clicking
*For New Tek product operation or instructions, please go to http://new.tk/NDIHX-Driver-Win
www.MyLumens.com
5. Camera connection description
Copyright ©2021 Lumens Digital Optics Inc. All rights reserved.
4. About the power supply 6. Web page setting