Lumens VC-TR1 User manual

www.MyLumens.com
1. Before Starting
3. One button for Auto-Tracking
2. Installation
4. Advance Settings
*Manually Add devices : Go to the device list. Click the Device Manager
and follow steps 1 to 5.
8m
2.4m
1.1
1.2 Download & install the Lumens CMS software
with
1.3 VC-TR1/PC/LC200, every equipment needs to
use the same network.
Get the VC-TR1 camera in place.
https://www.MyLumens.com/CMS
2.1 Accessory DC 12V or PoE+(IEEE802.3at) for power supply.
2.2 Default Resolution is 1080P, you can change it by CMS or another button
feature.
2.3 The VC-TR1 trace-range limitation is 4~15m, suggested range is 8m.
2.4 The installation height limitation is 2~3m, suggested height is 2.4m.
3.1
3.3 Press the remote “F1”button to start auto-tracking.
Turn on the VC-TR1 camera.
3.2 Let a person stand 4-15 meters in front of the camera.
4.1 Before setting up, please first press the F2 button on the remote control
to turn off the auto-tracking.
4.2 Start software.
4.3 Wait for 5-7 seconds. The VC-TR1 will appear on the device list
-> Twice click on the device, you will see the live view instantly.
Lumens CMS
1. Before Starting 2. Installation
VC-TR1 Quick Installation Guide
3. One button for
Auto-Tracking 4. Advance Settings
j
k
l
n
m
Copyright ©2020 Lumens Digital Optics Inc. All rights reserved.
5100401-51 MAY. 2021

4.4 Presenter Frame
4.5 Stage Frame
www.MyLumens.com
Copyright ©2020 Lumens Digital Optics Inc. All rights reserved.
4.6 Tracking Area
If you want more “close-up”view of your presenter, you need to set the
presenter frame.
Click [Presenter Frame] and adjust Pan-Tilt-Zoom, and set it to preset 1.
We advice the presenter's face shall be in the yellow auxiliary frame.
E
When there is no presenter to track, the view will automatically go back to
the stage frame.
Click [Stage Frame] and adjust Pan-Tilt-Zoom, and set it to preset 0.
We suggest users set the entire stage view.
E
This is the user-defined zone that represents the tracking enabled area.
Click [Settings] and then [Tracking area] -> Click and hold down the left
mouse button and drag to draw a tracking area -> Click [Save] -> Click
[Return] then back to Live view.
4.7 Blocked Area
This is used to shield a moving object that may have impacts on tracking accuracy.
Select one block area -> Click and hold the left mouse button and drag to draw
a tracking area -> Click [Save] -> Click [Return] then back to Live view.
4.8 Click [Start] to start auto-tracking.
V V V
1
2
3