
Wiring Diagram
Luminaire Parameter
!WAR NING
To avoid electric shock:
Installation and wiring of luminaire must be in
accordance with all applicable local codes.
Installation, inspection, and maintenance of luminaires
should be performed by a qualified electrician.
DO NOT make or alter any open holes in the luminaire.
DO NOT modify the luminaire.
DO NOT install damaged product.
Make sure electrical power is OFF before and during
installation and main tenance.
Make sure the equipment is properly grounded.
Make sure the supply voltage is same as the rated
fixture voltage.
To perform maintenance:
Only use luminaire in its intended location.
Make sure the luminaire is not covered with material
that will prevent convection or conduction cooling.
It’s suggested to perform visual, electrical, and mechani-
cal inspections on a regular basis.
Allow luminaire to cool before handling. Do not touch
enclosure or light source.
Working Temperature
Working Humidity
-40°C~+45°C
15%~90%RH
Storing Temperature
IP Rating
-40°C~+65°C
IP66
Installation Manual
Please read and follow all safety instructions. Save this manual for future reference!
SLP
SERIES