Lumme LU-1010 User manual
HAIR STRAIGHTENER
User manual
LU-1010
RUS
2
GBR
User manual
4
UKR
6
KAZ
7
2
RUS
.
.
, , , .
.
. .
.
, .
.
.
.
, .
, , .
. .
. .
, .
, .
:
, .
, , .
RUS
1.
2. . /
.
3.
GBR Parts list
1. Housing
2. ON/OFF switch
3. Aluminum heating plate with
ceramic coating
UKR
1.
2. . / .
3.
KAZ
1.
2. / -
3.
3
. .
.
.
«./ .». .
.
. .
, .
, , .
«./ .».
. , .
, .
.
, . .
.
, .. .
.
:
, . « ». .
, , .
.
/
( )
220-240 , 50
30
0,23 / 0,28
319 x 90 x 50
4
(, , , . .)
, / .
13 , 4- 5- , 6- 7- .
, , ,
. .
, , , 2 ()
. .
, , . – ,
: +5º +40º 60%. .
:
“MARTA TRADE INC.”
c/o Commonwealth Trust Limited, P.O. Box 3321, Road Town, Tortola, United Kingdom,
:
JIEYANG BADA HARDWARE ELECTRIC APPLIANCES CO., LTD
Tangpu Thoroughfare, Jieyang Testment Zone, Jieyang City, Guangdong Province, China
.,
, , , ,
, . : «», 188671, , , , , 4 23,
/ 8(812) 325-2334
: «», , 195220, . -, ., . 41, . , . 407
: « », , 194156, . -, ., . 93, . , . 7-, / 8(812) 325-
2334
GBR USER MANUAL
IMPORTANT SAFETY INSTRUCTIONS
Please read this instruction carefully in order to avoid damage due to incorrect use and keep it in a safe place for future references.
Before the first using check that permissible voltage of the appliance corresponds to the voltage of your home electrical supply network.
Incorrect handling can cause damage to the device and cause damage to the user.
For home use only. Do not use for industrial purposes.
For indoors use only.
Always unplug the appliance from the power supply when not in use.
Close supervision in necessary when it is used near children.
Do not leave the appliance switched on when you do not use it.
Never carry or suspend the appliance by the cord.
Before putting the appliance in storage it must be completely cooled down.
Do not operate after malfunction or damage of the cord or electric plug and after the fall of the appliance.
Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
Heating plates can be extremely hot when appliance is in operation. Be careful.
5
Do not use the appliance if you have any physical or mental disability and have no any operational experience with similar technics. In such cases the user must have the operating
instructions from the person which in charge of security arrangement of the user.
NOTE:
Do not use the appliance into a bathroom or near a water supply source. Do not touch the appliance by wet hands.
Do not use the appliance near water or near water-filled tubs, basins, sinks or other containers.
OPERATING INSTRUCTIONS
For the perfect hair styling wash and dry your hair before using the appliance. Do not use hairspray.
PREHEATING
Unwind the cord completely.
Connect the appliance to the electrical supply network.
Turn ON/OFF switch to ON, then the indicator lamp is lights up. Allow the device to warm up.
HAIR STYLING
Divide the hair into small clumps.
Place a clump between the straightening plates and squeeze the plates tightly. Hold the straightener in this position for the couple of seconds then pull it from the hair roots to the tips
with a small tension.
Repeat these steps until you get the desired result.
Do not brush your hair immediately after installation, wait for them to cool.
SHUTDOWN
Switch off the appliance with ON/OFF switch, then the indicator lamp is extinguished.
Turn off the power switch. Do not pull on the wire to disconnect the plug from the socket.
Before putting the appliance in storage it must be completely cooled down.
CLEAN AND CARE
Unplug the appliance from electrical supply network and wait until it completely completely cooled down.
Wipe over the housing, using a slightly damp cloth. Do not use any abrasive materials
Do not allow water or other liquids into the appliance.
Do not wrap the cord on the body of the device, because this can cause damage to the cord.
Store the appliance in a dry place.
6
SPECIFICATION
Power supply
Power
Net weight / Gross weight
Package size (L W H)
Producer:
JIEYANG BADA HARDWARE ELECTRIC APPLIANCES CO., LTD
Tangpu Thoroughfare, Jieyang Testment Zone, Jieyang City, Guangdong
Province, China
Made in China
220-240 V, 50 Hz
30 W
0,23 kg / 0,28 kg
319 mm x 90 mm x 50 mm
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th
characters indicate the month, the 6th and 7th indicate the year of device production.
The manufacturer reserves the right to change the design and technical data of the appliance without notice.
UKR
.
, , , .
. .
.
.
.
, .
, .
, .
. .
.
.
, .
, .
. .
, , .
.
. .
.
.
, .
7
/
( )
:
JIEYANG BADA HARDWARE ELECTRIC APPLIANCES CO., LTD
Tangpu Thoroughfare, Jieyang Testment Zone, Jieyang City,
Guangdong Province, China
220-240 , 50
30
0,23 / 0,28
319 x 90 x 50
(, , )
, / .
13 , 4- 5- , 6- 7- .
, , , .
.
KAВ
.
.
. .
.
.
, .
, .
. .
- , .
.
: , .
. , ,
.
, ( ) .
.
, .
.
. .
, .
8
.
. .
.
.
, .
/
( )
:
JIEYANG BADA HARDWARE ELECTRIC APPLIANCES CO.,
LTD
Tangpu Thoroughfare, Jieyang Testment Zone, Jieyang City,
Guangdong Province, China
220-240 , 50
30
0,23 / 0,28
319 x 90 x 50
(, , ) .
/ . 13 , 4- 5-
, 6- 7- .
.
Table of contents
Other Lumme Styling Iron manuals
