Luxier SP22-SS User manual

Luxier SP22-SS Rev. A2 0920161
Luxier SP22-SS
Features
- Stunning stylish European inspired design
- Durable stainless steel frame construction
- 8 body massage jets
- 4 stage shower functions (Rainfall, Waterfall, Massage Spray, Hand Shower)
- Contemporary brass hand shower

Luxier SP22-SS Rev. A2 0920162
Thank you for purchasing Luxier products. Please read the information below and keep this
installation guide for future reference. If you require assistance, please contact our customer service
department at 1-877-711-8828, Monday - Friday 9AM - 5PM Pacifi c Time. Or by email at
[email protected].
Limited Two (2) Year Warranty (For USA Only)
The manufacturer warrants this product to be free of manufacture defects during daily normal
household use for as long as it is owned by the original purchaser of this product. Please keep a
copy of the original invoice as proof of purchase.
Should a malfunction occur within the warranty period, Luxier USA will, as its option, (1)
repair or replace the defective part(s) or product(s) at no charge; (2) issue a refund of the original
purchase price of the product(s) (Valid within 30 days from the date of purchase); or (3) issue a
credit to be applied toward the purchase of a new Luxier product. Shipping/delivery charges
may apply and are in Luxier USA’s sole discretion.
This limited warranty shall not apply to goods which have been subject to accident, negligence,
improper installation, product abuse, product misuse, or use of cleaners containing abrasives, alcohol
or other organic solvents, whether performed by a contractor, service company, or yourself, are
excluded from this warranty.
Our responsibility under this limited warranty is limited to only to replacement parts and no other
costs. Luxier USA will not be responsible for labor charges and/or damage incurred by installation,
repair or replacement, nor for any indirect incidental or consequential damages, losses, injury or costs
of any nature relating to this product. Except as provided by law, this limited warranty
is in lieu of and excludes all other warranties, conditions, and guarantees, whether expressed or
implied, statutory or otherwise, including without restriction those merchantability of fi tness for use.
This limited warranty is non-transferable. This limited warranty only applies to products purchased
and installed in the United States. This limited warranty covers the original consumer purchase only
and does not include business, commercial or industrial use of this product. To obtain service under
the Limited Warranty, please contact Luxier USA at [email protected]. The Luxier USA Custom-
er Care Department will determine whether to repair or replace your product, issue a refund, or issue
a credit.

Luxier SP22-SS Rev. A2 0920163
Attention
• This installation guide is subject to change without notice, please contact us to request the most
updated version of this installation guide.
• This is a general installation guideline, actual installation may vary. Consult a professional if
necessary.
• Product drawings in this installation guide is for illustration purpose only. Actual product may vary
depends on model.
• Always take extra precautions and wear appropriate safety equipment when installing this product.
• Proper water pressure needs to be maintained to prevent possible scalding.
• Stainless steel shower panels are handmade and assembled. Product dimensions may vary
slightly, always measure the actual product before installation.
You may also need the following tools
1. Thread Sealant Tape, (PTFE Tape) 5. Pencil or Marker
2. Silicon Sealant 6. Level
3. Phillips Screw Driver 7. Hammer
4. Drill with ¼” Drill bit
Before You Begin
• Read and understand this instructions completely before installation.
• Unpack and inspect the shower panel from the package for shipping damage and make sure all
parts are included with the shower panel.
• Keep the product in its package until you are ready to install.
• Read and understand this installation guide completely.
• Make sure the installation site is clean and free of dust and debris.
• Please make sure the water supply is shut o󰀨 to the installation area. If necessary, shut o󰀨 the
water to the entire house.
• Turn on the water at a bathroom faucet in the house to relieve the pressure in the plumbing
system.
Rough-In
• Please follow all local building and plumbing codes.
• The height and placement of the shut o󰀨 valves will be based on the installation height of
the shower panel, see fi gure A. The installation height is approximately the total distance of
measurement A and measurement B.
• The fi nished wall opening for the valves should not be larger than 4.5” wide by 6” tall. Make sure
the opening is completely waterproof to prevent any water leaking into the wall space. (NOTE:
Product warranty does not cover any damages caused by water leak due to negligent and
improper installation of the shut o󰀨 valves and the shower panel.)
• An outlet box such as the Sioux Chief Ox BoxTM 696-G2001MF, 696-G2303MF, or 696-2403MF is
recommended to expedite the installation process of the shut o󰀨 valves. (NOTE: additional parts
such as brass reducer / adapters are required but not included with this product)

Luxier SP22-SS Rev. A2 0920164
Recommended
10” - 12”
Approximate shower inlet
valve location
approx. outlet
box location
(This is the distance from
the oor to the bottom
edge of the shower panel)
Reference Model Height is 5’8”
* Shower panel drawing on this page is for
illustration purpose only. Actual product may
vary depends on model.
Fig. A
(This is the distance from
the bottom edge of the
shower panel to the
shower panel inlet valve.
NOTE: This distance vary
by models, always take the
actual measurement from
the shower panel)
A
B
The installation height of the outlet box
is approximately the total distance of
measurement A and measurement B.
It is recommened to aim the top hori-
zontal body jets at the chest area of the
user for optimal showering experience.

Luxier SP22-SS Rev. A2 0920165
Technical / Flow Rate Data
Recommended Operating Pressure: 50 - 80 psi
Approx. ow rate: 3.38 gpm at 80 psi
*All Measurements are Approximate
495mm
19.49”
72.5mm
2.85”
200mm
7.87”
1550mm
61.02”
800mm
31.5”
260mm
10.24”
480mm
18.9”

Luxier SP22-SS Rev. A2 0920166
Parts List
01. Shower Panel Body
02. Hand Shower
03. Wall Mount Hand Shower Cradle
04. O rings
05. Hand Shower Hose
06. Hand Shower Water Connector
07. Screws X 4
08. Mounting Brackets X 2
09. Wall Anchors X 4
89
7
2
1
3
4
5
6

Luxier SP22-SS Rev. A2 0920167
Installation
1. Mark the positions of the 2 brackets on
the wall and set a side the panel. (NOTE:
The distance between the two brackets
should be 800mm or 31.5”)
800mm
31.5”
1”
2. Using a drill with a tile bit, drill the hole
slowly into the tile. Do not drill into any pip-
ing or wiring in the wall. Insert the anchors
into the wall. (NOTE: Before installing the
wall anchors, use a small piece of painters
tape or masking tape over the drill area.
This will prevent damages to the tile)
3. Secure the mounting brackets to the
wall.

Luxier SP22-SS Rev. A2 0920168
Installation (cont.)
4. Apply thread sealant tape to the thread-
ing on the shut o󰀨 valves before connect
both hot and cold water supply hoses to
the valves. Turn on the valves and check
all connections for possible leaks.
5. Hang the unit on the wall to complete the
installation. Make sure the unit is seated
properly. Apply silicon sealant on left and
right sides of the shower panel. (NOTE: do
not seal the bottom of the panel, this will
allow any possible future leaks to drain out
the panel)
6. Connect hand shower hose to the main
panel body. Attach the hand shower to the
hose. (NOTE: Install the rubber washer to
prevent leak.)

Luxier SP22-SS Rev. A2 0920169
Maintenance Guide
Please follow the cleaning material manufacturer’s instructions. In addition, pay attention to the
following points:
1. Regular cleaning can prevent mineral build up on shower head and handheld shower.
2. Use a mild detergent such as liquid dishwashing soap and warm water for cleaning.
3. Do not use abrasive / harsh chemical when cleaning the fi xture as they will damage and dull the
fi nish.
3. Carefully read the cleaner product label to ensure the cleaner is safe for use on the material.
4. Test the cleaner on a small area before using on the entire surface.
5. Do not leave the cleaner on the fi xture longer than necessary.
6. When using spray cleaners, spray fi rst onto a soft cloth or sponge. Never spray directly onto the
faucet as droplets can enter openings and gaps and cause damage.
5. After cleaning, rinse thoroughly with clean water to remove any cleaner residue.
6. Wipe dry with soft cloth to keep shower panel surface spot free.
Operation
1. Turn the water control valve to set the desired water tem-
perature.
2. Select the water function by turning the selector to the cor-
responding marking. All water functions can be turned on
the same time if there is enough water pressure supplied
to the shower panel.
Water Functions
Overhead Jets
Overhead Waterfall
Horizontal Body Jets
Handheld Shower
Water Control
Function Selectors