Luxier SP25-SS User manual

SP25-SS Rev. A2 1120171Luxier
Luxier SP25-SS
Features
• Stunning stylish European inspired design
• Elegant & Durable stainless steel frame construction
• Pressure balanced valve minimize the chance of scalding.
• 4 stage shower functions (Rainfall, Waterfall, Massage Spray, Hand Shower)
• 50 total rainfall nozzles and 4 adjustable horizontal spray massage jet pads with 24 nozzles on each pad

SP25-SS Rev. A2 1120172Luxier
Thank you for purchasing Luxier products. Please read the information below and keep this
installation guide for future reference. If you require assistance, please contact our customer service
departmentat1-877-711-8828,Monday-Friday9AM-5PMPacificTime.Orbyemailat
[email protected].
Limited Two (2) Year Warranty (For USA Only)
The manufacturer warrants this product to be free of manufacture defects during daily normal
household use for as long as it is owned by the original purchaser of this product. Please keep a
copy of the original invoice as proof of purchase.
Should a malfunction occur within the warranty period, Luxier USA will, as its option, (1)
repair or replace the defective part(s) or product(s) at no charge; (2) issue a refund of the original
purchase price of the product(s) (Valid within 30 days from the date of purchase); or (3) issue a
credit to be applied toward the purchase of a new Luxier product. Shipping/delivery charges
may apply and are in Luxier USA’s sole discretion.
This limited warranty shall not apply to goods which have been subject to accident, negligence,
improper installation, product abuse, product misuse, or use of cleaners containing abrasives, alcohol
or other organic solvents, whether performed by a contractor, service company, or yourself, are
excluded from this warranty.
Ourresponsibilityunderthislimitedwarrantyislimitedtoonlytoreplacementpartsandnoother
costs. Luxier USA will not be responsible for labor charges and/or damage incurred by installation,
repair or replacement, nor for any indirect incidental or consequential damages, losses, injury or costs
of any nature relating to this product. Except as provided by law, this limited warranty
is in lieu of and excludes all other warranties, conditions, and guarantees, whether expressed or
implied,statutoryorotherwise,includingwithoutrestrictionthosemerchantabilityoffitnessforuse.
This limited warranty is non-transferable. This limited warranty only applies to products purchased
and installed in the United States. This limited warranty covers the original consumer purchase only
and does not include business, commercial or industrial use of this product. To obtain service under
the Limited Warranty, please contact Luxier USA at [email protected]. The Luxier USA Custom-
er Care Department will determine whether to repair or replace your product, issue a refund, or issue
a credit.

SP25-SS Rev. A2 1120173Luxier
Attention
• This installation guide is subject to change without notice, please contact us to request the most
updated version of this installation guide.
• This is a general installation guideline, actual installation may vary. Consult a professional if
necessary.
• Product drawings in this installation guide is for illustration purpose only. Actual product may vary
depends on model.
• Always take extra precautions and wear appropriate safety equipment when installing this product.
• Proper water pressure needs to be maintained to prevent possible scalding.
• Stainless steel shower panels are handmade and assembled. Product dimensions may vary
slightly, always measure the actual product before installation.
You may also need the following tools
1. Thread Sealant Tape, (PTFE Tape) 5. Pencil or Marker
2. Silicon Sealant 6. Level
3. Phillips Screw Driver 7. Hammer
4. Drill with ¼” Drill bit
Before You Begin
• Read and understand this instructions completely before installation.
• Unpack and inspect the shower panel from the package for shipping damage and make sure all
parts are included with the shower panel.
• Keep the product in its package until you are ready to install.
• Read and understand this installation guide completely.
• Make sure the installation site is clean and free of dust and debris.
• Pleasemakesurethewatersupplyisshuto󰀨totheinstallationarea.Ifnecessary,shuto󰀨the
water to the entire house.
• Turn on the water at a bathroom faucet in the house to relieve the pressure in the plumbing
system.
Rough-In
• Please follow all local building and plumbing codes.
• Theheightandplacementoftheshuto󰀨valveswillbebasedontheinstallationheightof
theshowerpanel,seefigureA.Theinstallationheightisapproximatelythetotaldistanceof
measurement A and measurement B.
• Thefinishedwallopeningforthevalvesshouldnotbelargerthan4.5”wideby6”tall.Makesure
theopeningiscompletelywaterprooftopreventanywaterleakingintothewallspace.(NOTE:
Product warranty does not cover any damages caused by water leak due to negligent and
improperinstallationoftheshuto󰀨valvesandtheshowerpanel.)
• AnoutletboxsuchastheSiouxChiefOxBoxTM 696-G2001MF, 696-G2303MF, or 696-2403MF is
recommendedtoexpeditetheinstallationprocessoftheshuto󰀨valves.(NOTE:additionalparts
such as brass reducer / adapters are required but not included with this product)

SP25-SS Rev. A2 1120174Luxier
Recommended
10” - 12”
Approximate shower inlet
valve location
approx. outlet
box location
(This is the distance from
the oor to the bottom
edge of the shower panel)
* Shower panel drawing on this page is for
illustration purpose only. Actual product may
vary depends on model.
Fig. A
(This is the distance from
the bottom edge of the
shower panel to the
shower panel inlet valve.
NOTE: This distance vary
by models, always take the
actual measurement from
the shower panel)
A
B
The installation height of the outlet box
is approximately the total distance of
measurement A and measurement B.
It is recommened to aim the top hori-
zontal body jets at the chest area of the
user for optimal showering experience.

SP25-SS Rev. A2 1120175Luxier
Technical / Flow Rate Data
Recommended Operating Pressure: 50 - 80 psi
495mm
19.49”
200mm
7.87”
1500mm
59.06”
72.5m
2.85 ”
570mm
22.44”
770mm
30.31”
260mm
10.24”
365mm
14.37”
*All Measurements are Approximate

SP25-SS Rev. A2 1120176Luxier
Parts List
01. Shower Panel Body
02. Hand Shower
03. Hand Shower Cradle
04.Orings
05. Hand Shower Hose
06. Gasket
07. Hand Shower Water Connector
08. Screws X 4
09. Mounting Brackets X 2
10. Wall Anchors X 4
8
9
10
2
1
3
4
567

SP25-SS Rev. A2 1120177Luxier
Installation
1. Install hand shower cradle (1) to the
shower panel by installing the rubber
washer (2) and the locking nut (3) and
attach white plastic hose tube connector
(5) with PVC tubing to complete the
connection. (NOTE: Make sure the silicon
gasket (4) is seated properly inside the
connector.)
1
2
3
45
2. Mark the positions of the 2 brackets on
the wall and prepare the tile wall for drilling.
Use a piece of painters tape or masking
tape over the drill area to prevent damages
to the tiles.
(NOTE: The distance between the two
brackets should be 770 mm or 30.31”)
1”
3. Using a drill with a tile bit, drill the hole
slowly into the tile. Do not drill into any pip-
ing or wiring in the wall. Insert the anchors
into the wall.
770mm
30.31”

SP25-SS Rev. A2 1120178Luxier
Installation (cont.)
5. Apply thread sealant tape to the thread-
ingontheshuto󰀨valvesbeforeconnect
both hot and cold water supply hoses to the
valves.
IMPORTANT :
- Make sure the water supply hoses are
connected to the corresponding valves -
i.e. cold water hose to the cold water valve
and the same for hot water hose. The
mixing valve will not function properly if the
hoses are installed incorrectly.
- Before hanging the shower panel on
the wall. Turn on both valves and test all
functions on the shower panel and check
for leaks at this point. You should have
goodwaterowtotheshowerpaneland
full temperature control from the knobs.
4. Secure the mounting brackets to the wall.

SP25-SS Rev. A2 1120179Luxier
Installation (cont.)
7. Connect hand shower hose to the main
panel body. Attach the hand shower to the
hose. (NOTE: Install the rubber washer to
prevent leak.)
6. Oncetheshowerpanelhasbeentested
for functions and leaks. Hang the unit on
the wall to complete the installation. Due to
the limited space behind the shower panel,
do not bend the hoses. Any restrictions in
the water supply hoses will greatly reduce
the performance of the shower panel. Af-
ter the shower panel is set properly on the
wall, apply silicon sealant on both sides of
the shower panel to prevent the unit from
moving.
(NOTE: Do not seal the bottom of the
panel.)

SP25-SS Rev. A2 11201710Luxier
Operation
Water Functions
OverheadJets
OverheadWaterfall
HorizontalBodyJets
Handheld Shower
1. Turn the temperature control knob counter-clockwise to
set the desired water temperature. The control starts with
cold temperature and goes to warm and hot as the knob
is turned counter-clockwise (Important: Scalding may
occur if the control is set at high temperature, use this
control with caution)
2. Select the desired water function by turning the selector to
the corresponding marking. Multiple functions can be used
simultaneously only if there is adequate water pressure
supplied to the shower panel.
Temperature Control
Function Selectors
Maintenance Guide
Please follow the cleaning material manufacturer’s instructions. In addition, pay attention to the
followingpoints:
1. Regular cleaning can prevent mineral build up on shower head and handheld shower.
2. Use a mild detergent such as liquid dishwashing soap and warm water for cleaning.
3.Donotuseabrasive/harshchemicalwhencleaningthefixtureastheywilldamageanddullthe
finish.
3. Carefully read the cleaner product label to ensure the cleaner is safe for use on the material.
4. Test the cleaner on a small area before using on the entire surface.
5.Donotleavethecleaneronthefixturelongerthannecessary.
6.Whenusingspraycleaners,sprayfirstontoasoftclothorsponge.Neverspraydirectlyontothe
faucet as droplets can enter openings and gaps and cause damage.
5. After cleaning, rinse thoroughly with clean water to remove any cleaner residue.
6. Wipe dry with soft cloth to keep shower panel surface spot free.