REGULATORY COMPLIANCE AND SAFETY NOTIFICATION
This documentation contains regulatory compliance and safety information for both wireless and
non-wireless hardware. Not all the information contained in this document applies to every product.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi-
tions: (1) this device may not cause harmful interference, and (2) this device must accept any interfer-
ence received, including interference that may cause undesired operation.
Regulatory Compliance
The device complies with internationally recognized standards covering human exposure to electro-
magnetic fields from radio devices. This equipment also complies with FCC radiation exposure set forth
for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not be less than 20 cm (8 in) during normal operation.
Unauthorized antennas, modifications, or attachments could cause damage and may violate regulatory
approvals. Any changes or modifications not expressly approved by the party responsible for compli-
ance could void the authority to operate the equipment.
Luxul equipment marketed in the U.S. is restricted to usage of channels 1-11 only for 2.4GHz and
channels 100-140/149-165 for 5GHz.
FCC Statement—Wireless FCC 2.4GHz & 5GHz 802.11b/g/n/ac
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi-
tions: (1) This device may not cause harmful interference, and (2) this device must accept any interfer-
ence received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for either a Class A or Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Refer to included Quick Installation Guide for device-specific FCC Class information.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm (8in)
between the radiator & your body.
Warnings and Safety Information
Verify that the electrical circuits have appropriate grounding and overload protection.
Attach only approved power cords to the device.
Verify there is adequate ventilation around the device, and that ambient temperatures meet
equipment operation specifications.
DO NOT install in or near hot or humid places, such as a kitchen or bathroom. Take care to minimize
exposure to excessive heat or moisture.
Small parts and plastic bags used for packaging may be harmful to small children. KEEP ALL
ACCESSORIES OUT OF THE REACH OF CHILDREN!
This product may become hot when in use for extended time periods. This is normal and is not a
malfunction. DO NOT install where it will be exposed to paper, cloth or other flammable materials.
© 2015 Luxul. All Rights Reserved. LUX-REG-FCCSAFETY 0541505