MA lighting grandMA3 User manual

© 2021 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone [phone] - [e-mail] - www.malighting.com
1
MIDI Remotes
The MIDI Remotes tab is used to define actions for incoming MIDI notes or MIDI Control Changes (CC).
To learn more about the hardware part of the input, read the Connect MIDI topic.
To set the MIDI Offset, open the Output configuration menu:
Output configuration menu with a console and an onPC
Access the menu by pressing the Menu key and then tap Output Configuration .
-OR-
Use the command line to open the menu:
User name[Fixture]> Menu "OutputConfig"
1 of 4
grandMA3 User Manual – Remote In and Out
Version 1.5 – 2021-10-26
English

© 2021 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone [phone] - [e-mail] - www.malighting.com
1
To set the MIDI Offset to a new value, tap MIDI Offset .
The MIDI Offset pop-up opens:
MIDI Offset pop-up
To adjust the settings of the MIDI Remotes, switch to the In & Out window.
To open the In & Out window, press Menu and then tap In & Out .
Tap MIDI Remotes .
The MIDI settings window opens.
MIDI settings window
To learn more about the general DC Remotes settings like Name, Enabled, Fader, or Key read the Remote In and Out
topic.
2 of 4
grandMA3 User Manual – Remote In and Out
Version 1.5 – 2021-10-26
English

© 2021 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone [phone] - [e-mail] - www.malighting.com
1
To set the MIDI Channel value to a new value, tap MIDI Channel .
The Edit MIDI Channel pop-up opens:
The MIDI channel value features 16 channels that can be controlled individually. The MIDI receiver must use the same
MIDI channel as the MIDI sender to understand each other.
To set the MIDI Index value to a new value, tap MIDI Index .
The Edit MIDI Index pop-up opens:
The MIDI index value is the MIDI note or the MIDI control change number, depending on the set MIDI type. The MIDI
receiver must use the same MIDI index value as the MIDI sender to understand each other.
3 of 4
grandMA3 User Manual – Remote In and Out
Version 1.5 – 2021-10-26
English

© 2021 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone [phone] - [e-mail] - www.malighting.com
1
To set the MIDI Type value to a new value, tap MIDI Type .
The Select MIDI Type pop-up opens:
Note : only the MIDI note is analysed.
Note Attack : in addition to the MIDI note, the attack of the Note will be analyzed. The higher the attack, the more a
defined fader can be moved.
Note Attack Decay : together with the MIDI note, the Attack and Decay of the MIDI Note will be used.
4 of 4
grandMA3 User Manual – Remote In and Out
Version 1.5 – 2021-10-26
English