MA lighting LH-C010 User manual

LH-C010 Mini Moving Head Wash
User Manual
This manual contains important information.
Please read before operating fixture.

1
1 SECURITY TIPS
WARNING!!! To reduce the risk of fire, electric shock, or
injury to persons, follow these important safety instructions:
non-professionals, not to disassemble the light arbitrarily and
lighting accessories inside.
rated voltage range: AC110V-120V/60Hz or AC200V-240V / 50HZ
(to be selected).
not beam irradiate the flammable materials, flammable materials
and the lamp should be maintained at least 1M over the distance.
lamps used in ambient temperature: -15 ℃-40 ℃, the highest
temperature of the surface of the lamp: 60 ℃.
to keep away from the liquid substance and humid environment.
before using the lights must ensure the good grounding, can not
install charging and remove any parts.
the installation of lamps, must be fixed screw fasteners with
additional security cable and regular inspection.
lamps consecutive working hours is not recommended more than
10 hours.
should stop using the lights in time when happens unusual
conditions during the process
lamp parts of the rotation, external accessories and paste parts
should be regular inspected, such as the emergence of loose and
rock, should be reinforced in a timely manner to prevent the
accident.
lamps adopt strong winds to refrigerate, it is easy to accumulate the
dust, so you have to clean it weekly especially the cooling air
opening, otherwise the dust will plug leading to poor light

2
2. Product introduction
Power supply: AC90-240V 50/60HZ
Power consumption: 150W
LED: 7*10W RGBW 4in1 LED
DMX Channels: 9CH / 14CH optional
Shuttle: Flash rate: 0-10Hz
Dimmer: 0~100% mechanic dimmer
Maximum PAN-movement: 6300 , can be adjusted
Maximum TILT-movement: 2400, can be adjusted
Control mode : DMX , Sound , Auto , Master-Slave , Stand-alone
3.Control Board
001-512
d001
DMX control
FASt
MAFA
Fast Auto mode
MStS
Sound mode
MStc
Stand-alone mode
SlAu
Master-Slave mode
MASL-SLOU
Slow Auto mode
PAn
PAn
X Motor Forward
rPAn
Y Motor Reversal
TiL
TiL
Y Motor Forward
rTiL
X Motor Reversal

3
diS
diS
LCD Display normally
rdiS
LCD Display inversion
14CH
14CH
14 Channel mode
9CH
9 Channel mode
PA54
PA54
X motor 5400 turn
PA36
X motor 3600 turn
PA18
X motor 1800 turn
Ti27
Ti27
Y motor 2700 turn
Ti18
Y motor 1800 turn
Ti09
Y motor 900 turn
REST
REST
Reset
LOAD
LOAD
Initialization parameters

4
4. Channel
9 Channel Mode :
Channel
Function
1
0-255
Pan
2
0-255
Tilt
3
0-7
No effect
8-134
Dimming
135-239
Strobe from low to fast
240-255
No strobe
4
0-255
Red Dimming
5
0-255
Green Dimming
6
0-255
Blue Dimming
7
0-255
White Dimming
8
0-255
Motor speed
9
150-200
Reset
14 Channel Mode :
Channel
Function
1
0-255
Pan
2
0-255
Pan fine
3
0-255
Tilt
4
0-255
Tilt fine
5
0-255
Speed
6
0-7
No effect
8-134
Dimming
135-239
Strobe from low to fast

5
240-255
No strobe
7
0-255
Red Dimming
8
0-255
Green Dimming
9
0-255
Blue Dimming
10
0-255
White Dimming
11
0-7
Color selection
8-231
Color combination 1
232-255
Color jump
12
0-255
Color change speed
13
0-142
Auto
143-255
Sound
14
150-200
Reset
5.Maintenance
1. Please keep the light in dryness and avoiding use in wet place.
2. Using intermittently can be extended the life.
3. Attention to clean the fan and lens usually in order to get the
ventilating effects and
lighting effects better.
4. Please do not wipe the crust using organic menstruum for avoid to
damage the product.

6
6. Statement
The product has well capability and intact packing when leave factory.
All of the user
should comply with above warning item and manual, any misuse cause
of the damages are
not included in our guarantee, and also can not be responsible for any
malfunction &
problem owing to ignore the manual.
Please forgive that we will not be notice for technical change.
7.Controller connection diagram

7

Warranty Card
Name Model Production Purchase
Description: These must be truthfully fill, seal by the end-user and point-of-sale, or else the
warranty will not work (warranty period and terms, see the following)
warranty period：one year since purchase warranty terms：1、If fail when using the product
in normal state, you can made under the provisions of the warranty, show the warranty card
and purchase bills(copy), and enjoy free maintenance service in a specific service center or
the manufacturer.
2. The following will be the implementation of paid service:
(1)Without the effective warranty card
(2)There’s blank, alter and no point-of-sale name
(3)Fail caused by unresistance
(4)Fail caused by transportation or unloading
(5)Fail caused by not operate by manual
(6)Fail caused by disassemble without unauthorized
(7)Fail caused by using the unauthorized control system
Note:
Based on our company continue to improve the product, the statement
containing data may have changed, and will not notice the change any
more. Company retains its right to change specifications related when
product is improved. Thanks for your understanding.
End User
Company Name:
Add:
Sale Store
Link man:
Tel: Stamp