Magner 150 User manual

User’sManual MAGNER150
- 2 -
- Contents –
Important Safety Precautions............................................................................................ 4
Warning ............................................................................................................................... 4
1. START
1-1. Packing List...................................................................................................... 5
1-2. Options ............................................................................................................ 5
1-3. Appearance....................................................................................................... 6
2. BASIC OPERATION
2-1 Self-Diagnosis................................................................................................... 7
2-2. Counting Notes................................................................................................. 8
2-3. Display Function .............................................................................................. 9
2-4. Operation Key Function ................................................................................ 10
3. BASIC MODE
3-1. Count Mode..................................................................................................... 11
3-2. Euro Mode....................................................................................................... 14
3-3. USD Mode ....................................................................................................... 14
3-4. Local Currencies Mode.................................................................................. 14
4. OPERATION MODE I
4-1. Batch Mode..................................................................................................... 15
4-2. CF Mode .......................................................................................................... 15
4-3. ADD Mode....................................................................................................... 16
4-4. Grand Total Mode........................................................................................... 18
5. OPERATION MODE II
5-1.Mix Mode .......................................................................................................... 24
5-2.Dispenser Mode............................................................................................... 24
5-3.Separate Mode (SP Mode).............................................................................. 25
5-4.SP-ver Mode..................................................................................................... 25
5-5.SP-verA Mode .................................................................................................. 25
5-6.Single Mode ..................................................................................................... 26
5-7.Dir-MF Mode..................................................................................................... 26
5-8.Dir-MO Mode.................................................................................................... 26
5-9.Dir-SF Mode ..................................................................................................... 27
5-10. Dir-MO Mode..................................................................................................27
5-11. Serial Number Print Mode........................................................................... 29

User’sManual MAGNER150
- 3 -
6. SERIAL PRINTER
6-1. Descriptions of Serial Printer ....................................................................... 31
6-2. Descriptions of Serial Port............................................................................ 31
6-3. How to set the Serial Printer......................................................................... 32
6-4. Descriptions of Menu..................................................................................... 33
6-5 Print the receipt.............................................................................................. 33
6-6. Form of the receipt......................................................................................... 34
7. USER SETTING Mode
7-1. How to set the User Setting Mode................................................................ 35
7-2. Descriptions of Menu..................................................................................... 36
SPECIFICATION OF THE MAGNER150
Technical Specification/Options ................................................................................. 39
Error Code – Count Error................................................................................................. 40
Value Error ................................................................................................. 41
UV Error / MG Error................................................................................... 42
CFError/IRError...................................................................................... 43
REGULAR CLEANING OF THE MACHINE...................................................................... 44

User’sManual MAGNER150
- 4 -
- Important Safety Precautions -
9Do not plug several products in one multi-outlet.
9Do not bend the cable by force or leave it under any heavy object.
9Install the machine on the stable surface
9Unplug the machine before it is moved
9Do not pull the cable it unplugged.
9Do not plug in or unplug with your hands wet.
9Use only approved accessories and do not try to disassemble, repair or remodel it for
yourself.
9Do not let coin or other foreign objects in the machine.
9Do not keep and operate the machine at a place with high temperature and humidity.
- Warning-
Adjust the Gap Adjustment Knob before you start to count the notes.
Do not let coin or other foreign objects in the machine.
When folded note is inserted or notes are placed wrong on the HOPPER, the
machine does not work properly.
Before counting, adjust the HOPPER GUIDE.
If you catch Rear Cover Knob when you move the machine, it will be possible
setup value is changed or fatal error caused.
When you close the Front Cover or Rear Cover, be careful not to get hurt.
Do not look at directly of UV sensor in the Detector Module.

User’sManual MAGNER150
- 5 -
1. START
1-1. Packing List
1-2. Options
Power Cable
MAGNER150 Manual
RS232C cable
Serial Print cableExternal Display

User’sManual MAGNER150
- 6 -
1-3. Appearance

User’sManual MAGNER150
- 7 -
2. BASIC OPERATION
2-1. Self-Diagnosis
The machine shows below message on the
LCD DISPLAY for a short time during checking
the Memory.
If there is a problem in the system, error
message will be blinking on the Display.
Checking EEPROM Data .... OK
Checking Setting Data
HSRB Sensors ......... OK
Checking Count Sensors
Cis Up ............... OK
Main ................. OK
Reject ............... OK
Motor Speed Data
Main Motor ........... OK
Sub Motor ............ OK
After self-diagnosis, display shows as below.
When the machine turns on again, the latest
used mode will be shown.
Mix RJP CF
--------------------
0 0
$ 0
--------------------
B100 ---
Plug the power cable into the machine.
Turn on the power switch.
The machine starts self-diagnosis and check-
lists are shown on the display.
MAGNER150
MAGNER150 SERIES
CF FUNCTION : YES
SERIAL NUMBER : YES
LOCAL CURRENCY : YES
S/W ver: Vxx.x 2007-xx-xx

User’sManual MAGNER150
- 8 -
2-2. Counting Notes
When you place the notes on the
HOPPER, machine starts running. Counted notes stack at the STACKER
Pocket and trouble notes are sent to
REJECT Pocket.
If you remove the rejected note during counting, it is possible that displayed
reject counts differ from number of notes in the REJECT POCKET.
Display shows as below.
CURRENCY
Press CURRENCY key and
select any mode you will.
Counting Mode is for counting all currencies
without detection.
COUNT RJP ---
--------------------
0 0
0
--------------------
B100 ---

User’sManual MAGNER150
- 9 -
2-3. Display Function
Currency Mark
Operation Mode
Total value
of accepted
notes
Selected Batch Number
A
DD mode Display
Use of Reject Pocket
Number of
notes on
Stacker
Pocket
Number of notes
on Reject Pocket
Mix RJP ---
--------------------
0 0
$ 0
--------------------
B100 ADD
It is possible that the actual machine’s Display and the illustration Display
in the manual are little different.
Counterfeit
Detection
Activation

User’sManual MAGNER150
- 10 -
2-4. Operation Key Function
▲/+10 When press and hold down, enter User
setting Mode and Serial Print Mode.
BATCH Batch function Key. When press and
hold down the key, the function is released.
▼/+1 Menu selector.
LEVEL Select the double detection level in
Count Mode.
SPEED Change the count the speed in Count
Mode. After pressing, adjust the speed by
pressing +10 or +1 key.
ADD When press and hold down the key, you
can enter theADD Mode.
CF Counterfeit detection function key.
CURRENCY Choose currency
PRINT Show the denomination information. In
Serial Number Print Mode, print the information
by printer or display.
MODE Choose operation mode.
RESTART•STOP Clear counting value
information in Display. In special mode, exit the
menu.

User’sManual MAGNER150
- 11 -
3. Basic Mode
3-1. Count Mode
1. Place a note on the HOPPER
referring to following figure.
2. Move the HOPPER guide to make
the guide size is the same with the
note size.
3. If you use to USD or Euro, refer to
symbol of Hopper sticker.
How to place notes properly on HOPPER
Adjust the hopper guide, before counting
If you not adjust the hopper guide, the machine does not work properly.
Display shows as below.
CURRENCY
Press CURRENCY key and
select any mode you will.
Counting Mode is for counting all currencies
without detection.
COUNT RJP ---
--------------------
0 0
0
--------------------
B100 ---

User’sManual MAGNER150
- 12 -
If CIS skew error or Jam error occurs frequently,
adjust the GAP wider by turning the Gap Adjustment
Knob clockwise slightly.
In serial number print mode, if the inserted gap is
narrow, display shows as below.
- O +
Adjust the GAP wider
by turning the GAP KNOB
clockwise sli
g
htl
y
This mark will be blinking.
If you want to exit, press RESTART/STOP key.
Gap Adjustment

User’sManual MAGNER150
- 13 -
LEVEL
If you want to change the DDL,
press the LEVEL key and
select level.
When you save the DDL value, press and
hold down the LEVEL ke
y
.
If you press the LEVEL key, DDL value save
and
g
o to the COUNT mode.
DDL means Double Detection Level.
User can select the level and the range from 1
to 9.
- DDL 1: Euro, USD.
- DDL 2~8: Local currency
- DDL 9: If the notes are darker than EURO
or USD or the notes are so old,
user can select this level to
detection double notes. But when
counts normal notes in this level,
the machine do not detect the
double notes. Please take care.
COUNT RJP ---
--------------------
0 0
DDL:5 0
--------------------
B100 ---
Double Detection Level 4
-------------------------------
|Do you want to save DDL? |
| SAVE -> LEVEL |
| EXIT -> RESTART |
-------------------------------
Level key function

User’sManual MAGNER150
- 14 -
3-2. Euro Mode
3-3. USD Mode
3-4. Local Currencies Mode
Display shows as below.
CURRENCY
Press CURRENCY key and
select local currency.
MODE
Press the MODE key and
select operation mode.
According to optional local currency, LC is ₩,
¥, ZAR, AUD, SYP and etc.
Mix RJP ---
--------------------
0 0
LC 0
--------------------
B100 ---
Display shows as below.
CURRENCY
Select USD currency pressing
CURRENCY key.
MODE
Press the MODE key and
select operation mode.
It is possible that the machine denominates
USD.
Mix RJP ---
--------------------
0 0
$ 0
--------------------
B100 ---
Display shows as below.
CURRENCY
Select Euro currency pressing
CURRENCY key.
MODE
Press the MODE key and
select operation mode.
It is possible that the machine denominates
Euro.
Mix RJP ---
--------------------
0 0
€ 0
--------------------
B100 ---

User’sManual MAGNER150
- 15 -
4. Operation Mode I
4-1. Batch Mode
4-2. CF Mode
Display shows as below.
CF
If you want to detect the
counterfeit, press CF key
before counting. Mix RJP CF
--------------------
0 0
€ 0
--------------------
B100 ---
CF function is performed with other mode, except Count Mode and Serial
Number Print Mode, at the same time.
Display shows as below.
BATCH
If you want to activate Batch
function, press BATCH key. But
Display has no change.
After activating Batch function, if
you press BATCH key again, you
can select Batch Number. Batch
Number is changed continuously
when you press BATCH key.
If you press and hold down
BATCH key, Batch function is
inactive and Batch Number
becomes zero.
Mix RJP CF
--------------------
0 0
€ 0
--------------------
B100 ---
Mix RJP CF
--------------------
0 0
€ 0
--------------------
B 0 ---

User’sManual MAGNER150
- 16 -
4-3. ADD Mode
Mix RJP CF
--------------------
current
0 43
$ 523
--------------------
B100 ADD
Mix RJP CF
--------------------
Add
0 43
$ 523
--------------------
B100 ADD
When remove the notes from stacker
Display shows current counted information.
When count the notes
Display shows added information between
current and ahead counted notes.
Display shows as below.
ADD
When press and hold ADD key,
you can enter ADD Mode or
GRAND TOTAL Mode.
To enter ADD Mode, press +1 key.
In ADD Mode, you can cumulate
the counted result.
In ADD Mode, if press CURRENCY
Key, previous ADD value is
cleared.
It means ADD value is not saved
per currency.
SELECT KEY
+10 -> OFF ( COUNT )
+1 -> ADD
SPEED -> GRAND TOTAL
Mix RJP CF
--------------------
Add
0 0
$ 0
--------------------
B100 ADD

User’sManual MAGNER150
- 17 -
ADD VALUE ( USD )
------------------------------
$5 : XXX,XXX |
$10 : XXX,XXX |
$20 : XXX,XXX | Total Notes
$50 : XXX,XXX | : X,XXX,XXX
$100 : XXX,XXX |
$200 : XXX,XXX | Total Value
$500 : XXX,XXX | : XX,XXX,XXX
------------------------------
EXIT – RESTART KEY
When active this mode is active, it is possible that
the machine detects the counterfeit and recognizes
the denomination of notes
Ex) The result of cumulate mode in USD Mode
PRINT
If you want to see the result
Press and hold down
PRINT key.
Print the receipt: PRINT key
Clear Data: RESTART•STOP key.
Mix RJP CF
--------------------
current
0 48
$ 1,207
--------------------
B100 ADD
When count the notes again
Display shows current counted information
Mix RJP CF
--------------------
Add
0 91
$ 1,730
--------------------
B100 ADD
When remove the notes from stacker again
Display shows added information between
current and ahead counted notes.

User’sManual MAGNER150
- 18 -
4-4. Grand Total Mode
Mix RJP CF
--------------------
current
0 24
$ 153
--------------------
B100 G.TOTAL
When remove the notes from stacker
Display shows current counted information.
When count the notes
Display shows SubTotal 1 value.
Mix RJP CF
--------------------
SubTotal 1
0 24
$ 153
--------------------
B100 G.TOTAL
Display shows as below.
ADD
When press and hold ADD key,
you can enter ADD Mode or
GRAND TOTAL Mode.
To enter Grand Total Mode, press
SPEED key.
In Grand Total Mode, you can
settle accounts daily.
In Grand Total Mode, the counted
value is not erased,even if turn off
power.
SELECT KEY
+10 -> OFF ( COUNT )
+1 -> ADD
SPEED -> GRAND TOTAL
Mix RJP CF
--------------------
Grand Total
0 0
$ 0
--------------------
B100 G.TOTAL

User’sManual MAGNER150
- 19 -
If you want to save SubTotal 1, press and
hold down ADD Key again.
Mix RJP CF
--------------------
SubTotal 1
0 24
$ 153
--------------------
B100 G.TOTAL
SELECT KEY
ADD -> CONTINUE
SPEED -> ADD TO GRAND TOTAL
BATCH -> CLEAR SUB-TOTAL
+10 -> CLEAR GRAND-TOTAL
+1 -> OFF ( COUNT )
If press ADD key, return the previous screen
and count SubTotal xx continuously.
Mix RJP CF
--------------------
SubTotal 1
0 24
$ 153
--------------------
B100 G.TOTAL
If press SPEED key, SubTotal xx value is
saved to Grand Total.
And when start to count again, SubTotal xx+1
is started.
Mix RJP CF
--------------------
SubTotal 2
0 65
$ 1702
--------------------
B100 G.TOTAL
Mix RJP CF
--------------------
Grand Total
0 24
$ 153
--------------------
B100 G.TOTAL
Mix RJP CF
--------------------
Grand Total
0 24
$ 153
--------------------
B100 G.TOTAL
If press BATCH key, SubTotal xx is cleared
and Grand Total value which is saved until
SubTotal xx-1 is shown.

User’sManual MAGNER150
- 20 -
If press +10 key, Grand Total value is
cleared.
Mix RJP CF
--------------------
Grand Total
0 0
$ 0
--------------------
B100 G.TOTAL
If press +1 key, exit Grand Total Mode. Mix RJP CF
--------------------
0 0
$ 0
--------------------
B100 ---
Mix RJP CF
--------------------
SubTotal 12
0 87
$ 3667
--------------------
B100 G.TOTAL
Mix RJP CF
--------------------
SubTotal 12
0 0
€ 0
--------------------
B100 G.TOTAL
COUNT RJP --
--------------------
SubTotal 12
0 0
DDL:2 0
--------------------
B100 S1000 G.TOTAL
Mix RJP CF
--------------------
SubTotal 12
0 87
$ 3667
--------------------
B100 G.TOTAL
In GRAND TOTAL Mode, although changes CURRENCY and counts other currency, previous
SUB-TOTAL value is deleted.
If return to previous currency mode, previous SUB-TOTAL value is reloaded.
It means SUB-TOTAL value is saved per currency and only it is deleted by Menu item, +10 Key.