Magnimage MIG-CL9000 Series User manual

MIG-CL9000 series
User manual V1.4
△
!
Before using this LED Video Wall Controller，please read this
manual carefully and preserved for reference in the future.
Video Wall controller

Without the written permission, any unit or individual could not copy,
reproduction or translate the book or part of it. Also could not
transmit it in any form or any way (electronic, mechanical,
photocopying, record or other way) for any business and profitable
purpose.
The product specifications and information mentioned in this manual
is just for reference, will not give prior notice if there is any updated.
Unless there is a special agreement, it is just used as guidelines. All
the statements or information in this manual shall not constitute any
form of guarantee.
Statements

Briefs......................................................................................................1
Trademark Credit..........................................................................1
About Software.............................................................................1
Feature...........................................................................................2
Using Directions....................................................................................3
Attached accessories.....................................................................3
Safety Notice.................................................................................4
Function introduction............................................................................5
Summary .......................................................................................5
technical specifications.........................................................................6
Front and rear panel of Video Wall controller.....................................7
MIG-CL9003 Front panel ............................................................7
MIG-CL9003 Rear Panel .............................................................8
MIG-CL9004 Front panel ......................................................... 10
Directory

MIG-CL9004 Rear Panel .......................................................... 11
MIG-CL9008 Front panel ......................................................... 15
MIG-CL9008 Rear Panel .......................................................... 16
Board Introduction..................................................................... 18
Control board..................................................................... 18
Output board ...................................................................... 19
Input board......................................................................... 21
System menu ...................................................................................... 24
Status Icons ................................................................................ 25
Menu browsing .......................................................................... 25
Main menu ......................................................................... 26
Status information ............................................................. 27
Function setting ................................................................. 28
Communication setting ..................................................... 29
Language............................................................................ 30
About Magnimage............................................................. 31

Software.............................................................................................. 32
Operating environment.............................................................. 32
Installation.......................................................................... 33
Unloading........................................................................... 35
Running software....................................................................... 36
Connection window........................................................... 37
Main Program Window..................................................... 39
Guide Window................................................................... 45
Software Using........................................................................... 47
Preparation......................................................................... 47
New Project........................................................................ 49
Save Project ....................................................................... 55
Open Project ...................................................................... 56
Deepen Understanding...................................................... 57
Upper Software Interface Detail............................................... 59
Layer Interface and Operation.......................................... 59

Related Interface and Operation of Input Source............ 61
Output port related interface and operation..................... 65
Scenario related interface and operation.......................... 69
Interface of System State .................................................. 70
Warranty.............................................................................................. 71
The whole unit warranty............................................................ 71
The non-warranty provisions .................................................... 71
Quick use guide.................................................................................. 72

1
Thanks for your purchasing our LED Video processor. Do hope you can enjoy the
experience of the product performance. The design of the LED video processor
conforms to international and industry standards. But if with improper operation,
there will be a personal injury and property damage. In order to avoid the
dangerous, please obey the relevant instructions when you install and operate the
product.
VGA and XGA are the trademarks of IBM.
VESA is a Video Electronics Standards Association's trademark.
HDMI mark and High-Definition Multimedia Interface are all from HDMI
Licensing LLC.
Even if not specified company or product trademarks, trademark has been
fully recognized.
Do not change, decompile, disassemble, decrypt or reverse engineer the software
installed in the product, these acts are illegal.
Briefs
Trademark Credit
About Software

2
The pure hardware architecture, full channel RGB 24bit/60HZ
Support DP 4K * 2K input
Support adjusting the size and position of display layer, full screen roaming
Input - output signal real-time monitoring image (IP Replay function)
single outputs support 4 separate layers and a HD background
Save the work scene, and quickly call the template
DVI input, support EDID, support for customized output resolution
The group control for layers, fade switching for layers
Support a variety of control devices, IPAD and computer software
Support LED, LCD, projection screen splicing and fusion
The blade-board design, dual power backup
Feature

3
Attached accessories
Using Directions
manual×1
USB×1
Certificate×1
Powerline×2
Net cable×2
DVI cable×2
DP cable×1
HDMI cable×1

4
The power input voltage for this product is 100-240VAC50/60Hz, please use
the correct power supply
When you need to connect or plug out any signal or control line, please
confirm all the power line have been plugged out
When do you want to add hardware device into the product or to remove it,
please confirm all signal and power lines have been previously removed
Before any hardware operation, please prior switch off the power of
MIG-CL9000, and you can release your body electrostatic through touch
the ground surface
Please use it in a clean, dry and ventilated environment, do not use this
product in high temperature and humid environment
This product is electronic products, please stay away from fire, water and
inflammable and explosive dangerous goods
this product has high pressure parts, please do not open the case or for the
maintenance of the equipment by yourself
supposing it has smoking, odor and other abnormal situation, please
immediately turn off the power switch, and contact with dealers
Safety Notice

5
CL9000 series can be divide into 3U case MIG-CL9003and 4U case MIG-CL900
4or 8U case MIG-CL9008 according to case size.
MIG-CL9003 and MIG-CL9008 only have one model:
1. MIG-CL9003-A: with 4 output board slots, 5 input board slots
MIG-CL9004 is divided into three sub models:
1. MIG-CL9004-A: with 4 output board slots, 8 input board slots
2 . MIG-CL9004-B: with 6 output board slots, 6 input board slots
3. MIG-CL9004-C: with 8 output board slots, 4 input board slots
1. MIG-CL9008-A: with 11 output board slots, 9 input board slots
Function introduction
Summary
CYCLONE video wall controller is an video processing equipment of pure hardware
architecture, mainly be applied in LED large screen with small pixel spacing, realize
multi displays seamless splicing and running multi window, it can apply in security
monitoring, administration, military command, exhibition display, education and
scientific research and other industries.
CYCLONE host adopts the hardware architecture which based on large capacity high
speed FPGA array and high speed digital matrix, for a variety of input signal, internal
processing the RGB 24bits/60Hz, ensure the high reducibility of the signal, also built
in high performance scaling engine, support multi screen output when the seamless
splicing, to ensure the output image is clear, smooth, without delay.
Support for multi signal input, including DVI, VGA, HDMI, DP, SDI, AV, IP. EDID
management can be achieved on the input signal.
We provide after-sale service for all series of products, support USB upgrade and
network control, convenient technical support and after-sale maintenance;
maintenance.

6
technical specifications
Input board
Interface
Number
Specifications
VGA
4
VESA standard
DVI
4
VESA standard，support EDID
HDMI
4
HDMI-1.3standard
SDI
4
480i、576i、720p、1080i/p（3G SDI）
DP
2
DP 1.2 standard 3840×2160×30 Hz
AV
8
PAL、NTSC、SECAM MIG-CL9008 not
available
IP
2
H.264
Output board
Interface
Number
resolution
DVI-A
2×2
（Single port 4
layers）
1024×768/60Hz 1366×768/60Hz
1440×900/60Hz1440×1440/60Hz
1280×1024/60Hz 1680×1050/60Hz
1600×1200/60Hz1920×1080/60Hz
2560×816/60Hz customized output
resolution
Max inhorizontal 2560，Max inVertical
2560
DVI-B
4×1
（Single port 2
layers ）
IP
1
Network IP replay,MIG-CL9003 not support
Electrical specifications
Input power
100～240VAC，50/60Hz
working temperature
0~45℃
working temperature
10% -90% non-condensing

7
Front and rear panel of Video Wall controller
3
MIG-CL9003 Front panel
1、LOGO
Magnimage
2、LCD display
Mainly used for showing the status of the device, including the
input and output board configuration, firmware version, ambient
temperature, network configuration and other information
3、Functional key
area
Buttons 1~10, for the input of the machine configuration
information, such as the IP address in the network
configuration, subnet mask, etc.
4、the power
the power supply adopts double power supplies backup, and its
provided with an earth wire
5、Menu
operation area
OK key、key，As well as the knob；using LCD display，can
browse the local menu system
3
4
5
1
2
3
4
5

8
MIG-CL9003 Rear Panel
1、Board slot
MIG-CL9003 has a total of 12 board slots, in the
back of the case, it has 1 to 12 of the numerical
identification
2、Dust-against bracket
The dust-against bracket can be disassembled
conveniently for replacing a new one.
3、Fan bracket
Fan bracket can be easily removed for cleaning or
replacing
4、Control board
Control board is the MIG-CL9003 control center,
with a serial ports, network port, USB port, as well
as reference synchronization port
5、the power
the power supply, and its provided with an earth
wire
1
2
4
3
5

9
MIG-CL9003-A
Input configuration
area(the dark area)
8 input board slots (1st to 5th slots),
Output configuration
area(the light area)
4 output board slot (6th to 9th slot), each board slot
supports the main output, Only 6th slot can support multi
images preview output ;MIG-CL9003 cannot support
network IP replay

10
1 3
2
MIG-CL9004 Front panel
1、LOGO
Magnimage
2、LCD display
Mainly used for showing the status of the device,
including the input and output board configuration,
firmware version, ambient temperature, network
configuration and other information
3、Functional key
area
Buttons 1~10, for the input of the machine
configuration information, such as the IP address in the
network configuration, subnet mask, etc.
4、Menu operation area
OK key、key，As well as the knob；using LCD
display，can browse the local menu system
4

11
1、Board slot
MIG-CL9004 has a total of 12 board slots, in the
back of the case, it has 1 to 12 of the numerical
identification
2、Dust-against bracket
The dust-against bracket can be disassembled
conveniently for replacing a new one.
3、Fan bracket
Fan bracket can be easily removed for cleaning or
replacing
4、Control board
Control board is the MIG-CL9004 control center,
with a serial ports, network port, USB port, as well
as reference synchronization port
5、the power
the power supply adopts double power supplies
backup, and its provided with an earth wire
MIG-CL9004 Rear Panel
5
4
3
1
2

12
MIG-CL9004-A
Input configuration
area(the dark area)
8 input board slots (1st to 8th slots),
Output configuration
area(the light area)
4 output board slot (9th to 12th slot), each board slot
supports the main output, multi images preview output or
network IP replay

13
MIG-CL9004-B
Input configuration
area(the dark area )
6 input board slots (3rd to 8th slots),
Output configuration
area(the light area )
6 output board slots (1st, 2nd, and 9th to 12th board slots),
all the output board slots support the main output, but only
11th, 12th board slots can support multi images preview
output or network IP replay

14
MIG-CL9004-C
Input configuration area(the
dark area)
4 input board slots (5h to 8th slots),
Output configuration area(the
light area)
With eight output board slots (from the 1st to the 4
and 9 to 12 slots), all output board slot support main
output, but the only 12th board slot can support multi
images preview or network IP replay, but it will
occupy the 11th board resource and make the 11th
slot invalid