MAJORITY SCAFELL PIKE II Manual

SKP-BAR-BLK-2
SCAFELL PIKE II
Audio Soundbar & Wired Subwoofer
Instructions Guide

Controls And Funcons���������������������������������������������� 1
What’s In The Box?����������������������������������������������������5
Support �������������������������������������������������������������������� 6
Instrucons Guide �����������������������������������������������������7
Wall Mounng ���������������������������������������������������������� 7
Mode Indicator Lights����������������������������������������������� 9
Fixing the Soundbar������������������������������������������������� 10
Using the Opcal Input���������������������������������������������11
Using the MP3 LINK Connecon (Line In)���������������� 12
Connecng to the Mains Supply������������������������������ 13
Connecng the Subwoofer with the Soundbar ������� 14
Bluetooth Operaon������������������������������������������������ 15
Troubleshoong �������������������������������������������������������17
Specicaon������������������������������������������������������������ 18
Warranty ����������������������������������������������������������������� 18
Safety Informaon��������������������������������������������������� 19
Contents
Front View/LED Indicator Light
Watch video tutorials and register
your product for a FREE 3-year warranty
at www.majorityradios.co.uk
YEAR
WARRANTY

1
Controls And Funcons���������������������������������������������� 1
What’s In The Box?����������������������������������������������������5
Support �������������������������������������������������������������������� 6
Instrucons Guide �����������������������������������������������������7
Wall Mounng ���������������������������������������������������������� 7
Mode Indicator Lights����������������������������������������������� 9
Fixing the Soundbar������������������������������������������������� 10
Using the Opcal Input���������������������������������������������11
Using the MP3 LINK Connecon (Line In)���������������� 12
Connecng to the Mains Supply������������������������������ 13
Connecng the Subwoofer with the Soundbar ������� 14
Bluetooth Operaon������������������������������������������������ 15
Troubleshoong �������������������������������������������������������17
Specicaon������������������������������������������������������������ 18
Warranty ����������������������������������������������������������������� 18
Safety Informaon��������������������������������������������������� 19
Controls And Funcons
Rear View: Panel Interface Connection
8. OPTICAL In Socket
9. 3.5mm Line In Socket
10. AUX (L/R) In Socket
11. Subwoofer Output
12. DC 18V 1.5A Socket
Front View/LED Indicator Light
1. Speaker Drivers
2. Remote Control Sensor
3. LED Indicator Light
Side View: Buttons
4. Switch the unit on or o
5. SOURCE: Bluetooth, AUX in, LINE in
or OPTICAL in
6. Volume increase
7. Volume decrease
Automatic Power O Function
The Majority Scafell Pike will automatically turn to standby mode
after 60 minutes if the TV or external unit is discontinues or
switched o.
12 3
POWER
SOURCE
VOL+
VOL-
4
5
6
7
LINE IN AUX IN
SW.OUT DC 18V OPTICAL
8 9 10 11 12

2
Controls And Funcons
Remote Control
BASS
+INPUT
BASS
-
TRE
+PAIR
TRE
-
MOVIEMUSIC DIALOG
FLAT
VOL+
VOL-
12
11
13
14
16
18
19
20
21
22
15
17
23
11. Power On/O
Switch the unit between on and
Standby mode
12. Bass increase/decrease
Select to adjust the bass
13. Volume +
Press to increase the volume
14. Back Step
Use in Bluetooth mode to go back
a track.
15. Play/Pause
Use in Bluetooth mode, press to
pause/play media.
16. Volume -
Press to decrease the volume
17. Treble increase/decrease
Select to adjust the treble
18. Media Modes: Music,
Dialogue or Movie
Press relevant button for the media
type for the best sound quality
19. FLAT
Press button to restore to default
sound settings.
20. MUTE
Press to mute and unmute sound.
21. INPUT
Press repeatedly to switch between
modes
22. Forward Step
Use in Bluetooth mode to go forward
a track.
23. PAIR
In Bluetooth mode, press to pair
with your device. Press again to
disconnect.
Controls And Funcons

3
Controls And Funcons
Remote Control
20. MUTE
Press to mute and unmute sound.
21. INPUT
Press repeatedly to switch between
modes
22. Forward Step
Use in Bluetooth mode to go forward
a track.
23. PAIR
In Bluetooth mode, press to pair
with your device. Press again to
disconnect.
Controls And Funcons

1. Majority Scafell Pike Soundbar
2. Remote Control
3. Adapter
4. 3.5mm to 3.5mm Audio cable
5. RCA Stereo Audio Cable
4
The remote control sensor at the front of the soundbar is
sensitive to the remote control’s commands up to a maximum of
6 metres away and within a maximum arc of 40 degrees.
Please note that the operating distance may vary depending on
the brightness of the room.
Controls And Funcons
Using the Remote Control
What’s In The Box?
Box Contents

BASS
+INPUT
BASS
-
TRE
+PAIR
TRE
-
MOVIEMUSIC DIALOG
FLAT
VOL+
VOL-
1. Majority Scafell Pike Soundbar
2. Remote Control
3. Adapter
4. 3.5mm to 3.5mm Audio cable
5. RCA Stereo Audio Cable
6. Subwoofer
7. Wall Bracket
8. Wall Fixing and Screws
9. Instructions Guide
Majority Scafell Pike II Soundbar
Remote Control
Adapter 3.5mm to
3.5mm Audio
Cable
RCA Stereo
Audio Cable
Subwoofer Wall Bracket Wall Fixing and
Screws
Instruction
Guide 5
The remote control sensor at the front of the soundbar is
sensitive to the remote control’s commands up to a maximum of
6 metres away and within a maximum arc of 40 degrees.
Please note that the operating distance may vary depending on
the brightness of the room.
Controls And Funcons
What’s In The Box?
Box Contents

6
Thank you for your purchase of the Majority Scafell Pike II.
Please follow the guidance of the manual to set up your new
purchase and begin enjoying its features.
If you require further assistance with your new soundbar,
please contact our support team on the Majority website:
https://www.majorityradios.co.uk/support
Support
Support
Instrucons Guide
Wall Mounting
Safety
1. Incorrect assembly can result in severe personal injury and
property damage. If you are going to install this Soundbar
yourself, you must have studied installations, such as
electrical wiring and plumbing that may be buried inside
the wall. It is installer’s responsibility to verify that the wall
safely support the total load of the Soundbar.
2. Additional tools (not included) are required for the
installation.
3. Do not over-tighten screws.
4. Keep this user manual for future reference.
5. Use an electric stud nder to check the wall type before
drilling and mounting.
1. Drill tted with masonry
drill bit
2. Screwdriver
Tools & Fixings Required
• Place the soundbar in the desired position and using a spirit
level, check that the soundbar is level.
• Make a light pencil mark on the wall at the top edge of both
xing brackets. The mark should be positioned directly
above each bracket. Note the mounting points on the
soundbar (one is 170mm from the end while the other is

7
Thank you for your purchase of the Majority Scafell Pike II.
Please follow the guidance of the manual to set up your new
purchase and begin enjoying its features.
If you require further assistance with your new soundbar,
please contact our support team on the Majority website:
https://www.majorityradios.co.uk/support
Support
Support
Instrucons Guide
Wall Mounting
Safety
1. Incorrect assembly can result in severe personal injury and
property damage. If you are going to install this Soundbar
yourself, you must have studied installations, such as
electrical wiring and plumbing that may be buried inside
the wall. It is installer’s responsibility to verify that the wall
safely support the total load of the Soundbar.
2. Additional tools (not included) are required for the
installation.
3. Do not over-tighten screws.
4. Keep this user manual for future reference.
5. Use an electric stud nder to check the wall type before
drilling and mounting.
1. Drill tted with masonry
drill bit
2. Screwdriver
3. Pencil
4. Ruler
5. Spirit level
Tools & Fixings Required
• Place the soundbar in the desired position and using a spirit
level, check that the soundbar is level.
• Make a light pencil mark on the wall at the top edge of both
xing brackets. The mark should be positioned directly
above each bracket. Note the mounting points on the
soundbar (one is 170mm from the end while the other is

8
170mm from the other end),so you should use the soundbar
as a template to get the right mounting positions.
• Place the soundbar away from the work area and then mark
two xing points 7mm below the light pencil marks for
the screws. These marks should be 470mm apart and level.
Before drilling, use a spirit level to check that the xing
points marked are level.
• If xing to a solid masonry wall, use a masonry drill bit, drill
holes to a depth of approximately mm and insert the wall
plugs. Insert the screws into the wall plugs and drive home
the screws until the heads stand proud of the wall by about
mm.
Instrucons Guide
LINEIN AUXIN
SW.OUT DC18V
OPTICAL
470mm
Distance between the holes of two metal brackets
LINEIN AUXIN
SW.OUT DC18V
OPTICAL
470mm
Distance between the holes of two metal brackets
• If xing to timber, follow the directions above, but only drill
a small pilot hole for each screw and do not use the wall
plugs provided.
• If xing to hollow plaster board walls, use a drill bit suitable
for wood and replace the wall plugs with wall anchors
appropriate for the application. Locate the xing points into
wall studs and cross braces where possible.
• Locate the soundbar onto the screw heads and check that
the screws are fully engaged into the keyhole mount before
releasing your hold.
Instrucons Guide

9
170mm from the other end),so you should use the soundbar
as a template to get the right mounting positions.
• Place the soundbar away from the work area and then mark
two xing points 7mm below the light pencil marks for
the screws. These marks should be 470mm apart and level.
Before drilling, use a spirit level to check that the xing
points marked are level.
• If xing to a solid masonry wall, use a masonry drill bit, drill
holes to a depth of approximately mm and insert the wall
plugs. Insert the screws into the wall plugs and drive home
the screws until the heads stand proud of the wall by about
mm.
Instrucons Guide
• If xing to timber, follow the directions above, but only drill
a small pilot hole for each screw and do not use the wall
plugs provided.
• If xing to hollow plaster board walls, use a drill bit suitable
for wood and replace the wall plugs with wall anchors
appropriate for the application. Locate the xing points into
wall studs and cross braces where possible.
• Locate the soundbar onto the screw heads and check that
the screws are fully engaged into the keyhole mount before
releasing your hold.
LINEIN AUXIN
SW.OUT DC18V
OPTICAL
470mm
Distance between the holes of two metal brackets
Instrucons Guide

10
Mode Indicator Lights
Instrucons Guide
State Indicator Lights
Power o Red
Optical mode Yellow
AUX mode White
Line in mode Green
Bluetooth ready Flashing blue
Bluetooth connected Blue
Instrucons Guide
Use the RCA Stereo Audio Cable to connect the TV’s stereo
RCA(L/R) socket to the AUX(L/R) sockets of the unit.
Then press the INPUT button on the remote control (Ref.) or
press the SOURCE button on the soundbar repeatedly (Ref.) to
choose the AUX function. A white light will display via the LED
indicator once selected.
Turn on your television set to use the Majority Scafell Pike II.
Please check the ports that the RCA cable are being inputted
into on your TV. If the TV ports are ‘input’ rather than ‘output’,
please use a dierent process to connect the soundbar to your
TV.
LINEIN AUXIN
SW.OUT DC18V
OPTICAL
Rear view of the unit
RCA stereo audio cable
AUX IN
Fixing the Soundbar

11
Mode Indicator Lights
Instrucons Guide
State Indicator Lights
Power o Red
Optical mode Yellow
AUX mode White
Line in mode Green
Bluetooth ready Flashing blue
Bluetooth connected Blue
Instrucons Guide
Use the RCA Stereo Audio Cable to connect the TV’s stereo
RCA(L/R) socket to the AUX(L/R) sockets of the unit.
Then press the INPUT button on the remote control (Ref.) or
press the SOURCE button on the soundbar repeatedly (Ref.) to
choose the AUX function. A white light will display via the LED
indicator once selected.
Turn on your television set to use the Majority Scafell Pike II.
Please check the ports that the RCA cable are being inputted
into on your TV. If the TV ports are ‘input’ rather than ‘output’,
please use a dierent process to connect the soundbar to your
TV.
LINEIN AUXIN
SW.OUT DC18V
OPTICAL
Rear view of the unit
RCA stereo audio cable
AUX IN
Fixing the Soundbar

12
Instrucons Guide
You will need: An audio source with an Optical Audio Output and a Digital
Optical Audio cable (not included)
Connect the Digital Optical Audio cable to the optical output on
the audio source and to the Optical Input on the speaker bar.
Press the POWER button on side panel (Ref.) or POWER button
directly on the remote control (Ref.) to switch on the unit.
Press INPUT button on the remote control (Ref.) to switch
to Optical mode or press the SOURCE button on the soundbar
(Ref.) repeatedly to select Optical mode. The mode indicator
LED will turn Yellow.
Using the native controls on your connected device, make
sure the audio settings are set to PCM or Optical Audio and are
turned On.
Audio from the connected audio source will now be played
through the speakers.
LINEIN AUXIN
SW.OUT DC18V OPTICAL
LINEIN AUXIN
SW.OUT DC18V
OPTICAL
Rear view of the unit
OPTICAL cable
Using the Optical Input
Instrucons Guide
Plug one end of a 3.5mm audio input cable (included) into the
Line in on the unit (Ref.). Before use, disconnect any cables
connected to the Stereo RCA Inputs.
Plug the other end of the cable into the audio output/
headphone output on an MP3 player or other audio source.
Press the POWER button on side panel (Ref.|) or POWER button
directly on the remote control (Ref.) to switch on the unit.
Press INPUT button repeatedly on the remote control (Ref.) or
press the SOURCE button on the soundbar (Ref.) repeatedly to
enter LINE in mode. The mode indicator will turn green.
Audio played through the connected device will now be heard
through the speakers.
Using the MP3 LINK Connection (Line In)

13
Instrucons Guide
You will need: An audio source with an Optical Audio Output and a Digital
Optical Audio cable (not included)
Connect the Digital Optical Audio cable to the optical output on
the audio source and to the Optical Input on the speaker bar.
Press the POWER button on side panel (Ref.) or POWER button
directly on the remote control (Ref.) to switch on the unit.
Press INPUT button on the remote control (Ref.) to switch
to Optical mode or press the SOURCE button on the soundbar
(Ref.) repeatedly to select Optical mode. The mode indicator
LED will turn Yellow.
Using the native controls on your connected device, make
sure the audio settings are set to PCM or Optical Audio and are
turned On.
Audio from the connected audio source will now be played
through the speakers.
LINEIN AUXIN
SW.OUT DC18V OPTICAL
LINEIN AUXIN
SW.OUT DC18V
OPTICAL
Rear view of the unit
OPTICAL cable
Instrucons Guide
Plug one end of a 3.5mm audio input cable (included) into the
Line in on the unit (Ref.). Before use, disconnect any cables
connected to the Stereo RCA Inputs.
Plug the other end of the cable into the audio output/
headphone output on an MP3 player or other audio source.
Press the POWER button on side panel (Ref.|) or POWER button
directly on the remote control (Ref.) to switch on the unit.
Press INPUT button repeatedly on the remote control (Ref.) or
press the SOURCE button on the soundbar (Ref.) repeatedly to
enter LINE in mode. The mode indicator will turn green.
Audio played through the connected device will now be heard
through the speakers.
LINE IN AUX IN
SW.OUT DC 18V
OPTICAL
Rear view of the unit
Audio device
3.5mm to 3.5mm
audio cable
Using the MP3 LINK Connection (Line In)

14
Instrucons Guide
Ensure that the power supply voltage is in the voltage of
100V~240V.
This unit is designed to use adapter.
Connecting the unit to any other power source may cause
damage to the unit.
Unwind the mains cable to its full length. Connect the mains
plug to a mains socket. Make sure the mains plug is fully inserted
into the mains socket.
The mains plug/appliance coupler is used as the disconnect
device, the disconnect device must remain readily operable.
Connect the Adapter to the unit and AC Socket.
LINEIN AUXIN
SW.OUT DC18V
OPTICAL
Ensure all audio connecons of the unit are connected before connecng
to the mains power socket.
Unplug the power cord from the outlet when the unit is use for an
extended period of me.
ATTENTION
RISQUE D’ELECTROCUTION
NE PAS OUVRIR
!
Connecting to the Mains Supply
Instrucons Guide
Connecting the Subwoofer with the Soundbar
Follow the below instructions to connect the wired
subwoofer to the subwoofer.
Plug the soundbar into mains sockets. Press POWER button on
the unit (Ref.4) or the POWER button on the remote control
(Ref.11) to switch on the unit.
Use the RCA audio cable from the subwoofer to connect to the
SW.OUT jack (subwoofer out) on the soundbar.
When audio is played through any source, the bar will
automatically use the connected subwoofer.

15
Instrucons Guide
Ensure that the power supply voltage is in the voltage of
100V~240V.
This unit is designed to use adapter.
Connecting the unit to any other power source may cause
damage to the unit.
Unwind the mains cable to its full length. Connect the mains
plug to a mains socket. Make sure the mains plug is fully inserted
into the mains socket.
The mains plug/appliance coupler is used as the disconnect
device, the disconnect device must remain readily operable.
Connect the Adapter to the unit and AC Socket.
LINEIN AUXIN
SW.OUT DC18V
OPTICAL
Ensure all audio connecons of the unit are connected before connecng
to the mains power socket.
Unplug the power cord from the outlet when the unit is use for an
extended period of me.
Instrucons Guide
Connecting the Subwoofer with the Soundbar
Follow the below instructions to connect the wired
subwoofer to the subwoofer.
Plug the soundbar into mains sockets. Press POWER button on
the unit (Ref.4) or the POWER button on the remote control
(Ref.11) to switch on the unit.
Use the RCA audio cable from the subwoofer to connect to the
SW.OUT jack (subwoofer out) on the soundbar.
When audio is played through any source, the bar will
automatically use the connected subwoofer.
LINEIN AUXIN
SW.OUT DC18V OPTICAL

16
Instrucons Guide
Pairing a Bluetooth Device for the First Time
Press the POWER button on the unit (Ref.) or the POWER
button on the remote control (Ref.) to switch on the unit.
Select and press the INPUT button directly on the remote control
(Ref.) or press the SOURCE button repeatedly on the soundbar
(Ref.) to enter Bluetooth mode, indicated by a ashing blue
light.
Using the native controls on your Bluetooth device, select the
“Majority Scafell Pike II”in your Bluetooth settings to pair.
If your device requests a password, enter the default“0000”.
Refer to the“user manual” for your specic device for instructions
on pairing and connecting Bluetooth devices.
When successfully paired and connected, a beep will issue from
the unit and the Pairing Indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired
manually by the user, or until it is erased due to a reset of the
device.
If the soundbar is Bluetooth connected to a device, you can
press the PAIR button for 3 seconds to exit this device in order to
pair the device with another Bluetooth device.
If your device should become unpaired or you nd it is unable to
connect, repeat the above steps.
Bluetooth Operation
Follow the instructions for Pairing a Bluetooth Device.
Use the native controls on the connected Bluetooth Device to
select a track.
To play, pause or skip the selected track, use the native controls
on the connected Bluetooth Device.
Audio played through the connected Bluetooth device will now
be heard through the speakers.
Instrucons Guide
Playing Audio Wirelessly

17
Instrucons Guide
Pairing a Bluetooth Device for the First Time
Press the POWER button on the unit (Ref.) or the POWER
button on the remote control (Ref.) to switch on the unit.
Select and press the INPUT button directly on the remote control
(Ref.) or press the SOURCE button repeatedly on the soundbar
(Ref.) to enter Bluetooth mode, indicated by a ashing blue
light.
Using the native controls on your Bluetooth device, select the
“Majority Scafell Pike II”in your Bluetooth settings to pair.
If your device requests a password, enter the default“0000”.
Refer to the“user manual” for your specic device for instructions
on pairing and connecting Bluetooth devices.
When successfully paired and connected, a beep will issue from
the unit and the Pairing Indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired
manually by the user, or until it is erased due to a reset of the
device.
If the soundbar is Bluetooth connected to a device, you can
press the PAIR button for 3 seconds to exit this device in order to
pair the device with another Bluetooth device.
If your device should become unpaired or you nd it is unable to
connect, repeat the above steps.
Bluetooth Operation
Follow the instructions for Pairing a Bluetooth Device.
Use the native controls on the connected Bluetooth Device to
select a track.
To play, pause or skip the selected track, use the native controls
on the connected Bluetooth Device.
Audio played through the connected Bluetooth device will now
be heard through the speakers.
Instrucons Guide
Playing Audio Wirelessly

18
Troubleshoong
If the Soundbar does not work properly as desired, please check
the following checklist.
Malfunction Possible causes/measures
No power / function
Check whether the power is switched on or
o at the wall.
Check whether the power adaptor is
properly connected to power outlet or not.
No sound
Check whether unit is set to MUTE or not.
Check whether MODE is correctly selected
or not.
Check whether cables are properly installed
or not.
No sound from bluetooth
connection
Check whether you have pressed PAIR
button before pairing.
Check whether external device requires
password “0000”to start with.
Function disturbance
Switches o and unplugs the unit. Leaves
it for  minutes and switches it on again.
If a particular mode is causing problems,
please try an alternative connection to
your TV such as Optical, AUX or Bluetooth.
Remote control does not work
[properly]
Check whether the battery run out or not.
Replaces a new one if necessary.
Check whether there is obstacle on the
front of remote sensor or not.
No sound when connection
and switches to OPTICAL IN
mode
Check and ensures the audio setting of the
input source (e.g. TV,game console,DVD
player, etc.)is set to PCM mode while using
digital connection (such as Optical,HDMI
and COAXIAL)
Specicaons
Power Supply DC 18V 1.A
Frequency Response Hz-KHz
SNR dB
Separation dB
Bluetooth V3.0
Dimension (WxHxD) Sound bar:  x . x . cm
Sub-woofer: . x . x  cm
Specication
All products come with a standard 12 month warranty. All items
must be registered on www.majorityradios.co.uk for the
warranty to be valid. Once on the web page, use the menu to
nd “Register Your Product”. You will also be given the chance
to extend your warranty for an additional 24 months, free of
charge.