
10 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DUR194
Type of handle Loop handle
No load speed 2: 6,000 min-1
1: 4,500 min-1
Overall length
(without cutting tool)
1,580 mm
Nylon cord diameter 2.0 mm
Applicable
cutting tool
and cutting
diameter
8-tooth blade
(P/N 191Y44-2)
200 mm
Nylon cutting head
(P/N 198893-8, 191D89-4)
280 mm
Plastic blade
(P/N 191Y45-0)
230 mm
Rated voltage D.C. 18 V
Net weight 2.6 - 2.9 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC/DC18RD/DC18RE/DC18SD/DC18SE/DC18SF/
DC18SH
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Recommended cord connected power source
Portable power pack PDC01
• Thecordconnectedpowersource(s)listedabovemaynotbeavailabledependingonyourregionofresidence.
• Beforeusingthecordconnectedpowersource,readinstructionandcautionarymarkingsonthem.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Take particular care and attention.
Read instruction manual.
15m(50FT)Keep distance at least 15 m.
Danger;beawareofthrownobjects.
Caution; kickback
Wear a helmet, goggles and ear protection.
Wear protective gloves.
Wear sturdy boots with nonslip soles.
Steeltoedsafetybootsarerecommended.
Warning; Disconnect battery before
maintenance.
Do not expose to moisture.