Malouf Carlisle User manual

(G) Horizontal Wall Mount
Mounting Blocks
(G) Horizontal Wall Mount
ASSEMBLY INSTRUCTIONSHEADBOARD
PARTS LIST:
AMboltsx
BBigWashersx
FNutsx
HVerticalWallMountx
GHorizontalWallMountx
IScrewsx
JDrywallAnchorsx
LAllenKeymm
KAllenKeymm
DMBoltsx
CWrenchx
ESmallWashersx
(A) M Bolts
(A) M8 Bolts
(B) Big Washers
(B) Big Washers
Legs
Figure 2
A B C
F
D
H
G I
J
E
Figure 1
Headboard
Bed Frame (F) Nuts
(E) Small Washers
(D) M6 Bolts
Figure 3
Failure to follow these warnings and assembly instructions could result in serious injury or death. Read all instructions before assembling the headboard. Keep the assembly instructions
for future use. Before each usage or assembly, inspect the headboard for damaged hardware or missing parts. DO NOT use the headboard if any parts are missing or broken. If
replacement parts and instructional literature are needed, contact the manufacturer at --. DO NOT substitute parts.
Step 1
Removetheheadboardfromtheboxandlayitfacedownonthefloor
Openthevelcropanelonthebackandremoveboththelegsand
hardware
Step 2
Inserteachlegintooneoftheprovidedslotsonthebackofthe
headboardandslidetoadjusttoyourdesiredheight
Step 3 (see Figure 1)
Usingtwoofthe(A) M8 boltsandtwoofthe(B) big washers
foreachlegsecurebothlegstotheheadboardwiththe(L) allen key
provided
Step 4 (See Figure 2) **recommended**
Usingthemountingblocksonthebackofyourheadboardscrewthetwo
(G) wall mountstothetopofyourheadboardwiththeprovided(I)
screwsUsingtheremaining(I) screwsattachthe(H) wall mountsto
yourwallMakesuretoplacethewallmountsatthecorrectheighttopair
withyourpreviouslyinstalled(G) wall mountsseefigureIfnowall
studsareavailabletosecuretheheadboardtoyourwallusethe
provided(J) drywall anchorsinstead Liorslidetheheadboardinto
placetojointhe(G) and (H) wall mountstogether
Step 5 (See Figure 3)
Withthefrontsideoftheheadboardfacingthebedframeattachthe
headboardtotheframeusingthe(D) M6 bolts, (E) small washers, (F)
nuts, and (K) allen key.
If your bed frame doesn’t fit the headboard, use the provided modification plates that
are included to secure the bed frame to the headboard. Additional instructions are
included with the plates.
K L
Wall
Top of the Headboard
(I) Screws x
(I) Screws x
(G) Wall Mount
(H) Wall Mount
(J) Drywall Anchor x
(if needed in step )

Useprovidedlocknutssmallwashersandshort
Mboltstoattachheadboardtomodiplates
1
2
ASSEMBLY INSTRUCTIONS
Failure to follow these warnings and assembly instructions could result in serious injury or death. Read all instructions before assembly. Keep the
assembly instructions for future use. Before each usage or assembly, inspect for damaged hardware and missing parts . DO NOT use this product if any
parts are missing or broken. If replacement parts and instructional literature are needed, contact the manufacturer at --. DO NOT substitute
parts. Check fasteners and rivets periodically for tightness and positioning.
HEADBOARD MODIFICATION PLATE
STANDARD
MODIFICATION PLATE
ModiPlates
ShortMBolts
PartsList
LockNuts
SmallWashers
fig. 1
Modi Plate
Short M6 Bolts
Lock Nuts
Small Washers
Headboard
Bed Frame
Placeassembledbedframeinfrontofheadboardandpositionmodi
platetodeterminewhichslotswilllineupwithheadboardbracketsand
headboardUseprovidedlocknutssmallwashersandshortMbolts
toattachmodiplatestoheadboardbracketsasshowninfigure