Manhattan Comfort Crown 167GMC User manual

167GMC
V.08192022

02
Before beginning the assembly process,
ensure all boxes and parts have been delivered.
STOP!
FOR BEST RESULTS:
Do not throw away packaging materials until assembly is complete.
Assemble item on a soft surface, such as cardboard or carpet, to protect finish.
Proper assembly requires two people.
SUPPORT SITE
View our assembly video online
WWW.MANHATTANCOMFORT.COM
Stuck? Question? We are here to help.
tel: [phone]
e-mail: [email protected]
TOOLS REQUIRED

10
09 08
07 06
Included in this package:
01. Base
02. Left Side Panel
03. Right Side Panel
04. Top Panel
05. Back Panel
11. Rear Panel
12. Upper bar
13. Lower bar
14. Leg
15. Door
01
01
01
01
03
02
01
01
04
02
03
16. Hanger bar 01
17. Shelf 01
17
06. Front of Drawer
07. Side of Drawer - Left
08. Side of Drawer - Right
09. Back of Drawer
10. Bottom of Drawer
02
02
02
02
02

Included in this package:
04
Where to find the items:
BOX - 1
02
03
07
08
09
14
15
16
A - x45 B - x08 C - x08 D - x02
E - x36 F - x16 G - x16 H - x08 I - x96
J - x06 K - x16 L - x04 N - x02
O - x02 P - x06
M - x08
BOX - 2
01
04
05
06
10
11
12
13
17
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P

05
Weight capacity:
Rear view
11 lb
22 lb
Hanger Bar

06
Step 01
Step 02
H = 08x
Apply the hardware (F) into the parts 02 and 03.
F = 08x
Apply the hardware (H)
into the parts 02 and 03.
Rear Side
Rear Side
Rear Side
Rear Side
Attention, all the assemblage must be done on the cardboard
box or the Styrofoam boards to avoid damage to the parts.
- It is mandatory two people to assemble
- It is recommended to use a ladder

Step 03
Step 04
07
Connect the part 14
onto the part 02
with the hardware (A).
A = 06x
Connect the part 14
onto the part 02
with the hardware (A).
A = 06x
Rear Side
Rear Side
14

Step 05
Step 06
08
Connect the part 14
onto the part 03
with the hardware (A).
A = 06x
Connect the part 14
onto the part 03
with the hardware (A).
A = 06x
Rear Side
Rear Side

Step 07
Step 08
09
Connect the part 11 onto the part 02 with the hardware G.
G = 04x
K = 04x
Apply the hardware (K) on the hardware (G).
Connect the part 11 onto the part 03 with the hardware G.
G = 04x
K = 04x
Apply the hardware (K) on the hardware (G).
11
11
11
11

Step 09
Step 10
10
Connect the part 13
onto the part 01
with the hardware (A).
A = 03x
Connect the part 01
onto the part 02 and 03
with the hardware (A).
A = 04x
Rear Side

Step 11
Step 12
11
Connect the part 12
onto the part 04
with the hardware (C).
C = 02x
Connect the part 04
onto the part 02 and 03
with the hardware (A).
A = 04x
Rear Side

Step 13
12
Step 14
L = 04x
A = 06x Connect the part 16
onto the part 02 and 03
with the hardware (A).
Apply the hardware ( L ) into
the part 14.

I = 96x
Connect the part 05 with the hardware ( I ).
Step 15
13

You will need a pencil to mark where you should drill the wall with a
3/8" drill bit to put in the hardware (O).
Use the 3/8" drill bit to drill the wall.
First, approach the furniture as close as possible to the wall.
Step 16
14
Attention! Tipover system.
(It is recommended to use a ladder)

Press the wings of the hardware (O) and put it in to the hole
that you drilled on the wall.
*Hardware (O) plugged
in the wall.
Connect the hardware (M) on the wall
using the hardware (D).
Connect the hardware (N), on the part 04 with the hardware (B).
O = 02x
B = 04x
D = 02x
Step 17
15
Attention! Tipover system.

Apply the hardware (E) into the part 06.
E = 08x
Connect the parts 07, 08 onto the part 06 with the hardware F.
F = 08x
J = 08x
Apply the hardware (J) onto the hardware (F).
Step 18
16
Step 19
Attention:
Assemble item on a soft surface,
such as cardboard, Styrofoam board
or carpet to avoid damage.
Attention:
Assemble item on a soft surface,
such as cardboard, Styrofoam board
or carpet to avoid damage.

Apply the part 10 in the groove of the parts 07, 08 until the groove of the part 06.
Connect the part 09 onto the parts 07, 08 with the hardware (A).
A = 08x
Step 20
Step 21
17
10
08 06
07
09
08
07
Attention:
Assemble item on a soft surface,
such as cardboard, Styrofoam board
or carpet to avoid damage.
Attention:
Assemble item on a soft surface,
such as cardboard, Styrofoam board
or carpet to avoid damage.

M = 08x
B = 08x
Apply the hardware (C + H) onto the front of the drawer.
C = 04x
H = 04x
Apply the hardware (B + M) into the groove of the part 06 and 09 as shown
on detail.
Step 22
Step 23
18
09
06
09
06
06
Attention:
Assemble item on a soft surface,
such as cardboard, Styrofoam board
or carpet to avoid damage.
Attention:
Assemble item on a soft surface,
such as cardboard, Styrofoam board
or carpet to avoid damage.

P = 06x
Insert the hardware (P) into the parts 15.
Step 24
19
Door assembly and adjustment.
Attention!
Is the wardrobe in the right place?
If yes go ahead installing the doors.

Apply the hardware (C + J) onto the doors (parts 15).
C = 02x
J = 02x
20
Step 25
Step 26