Manhattan 160353 User manual

MAN-160353-UM-1106-02
FIREWIRE 400
PCI EXPRESS CARD
USER MANUAL
MODEL 160353

Thank you for purchasing the MANHATTAN® FireWire 400 PCI Express Card, Model 160353.
This card has IEEE 1394a / FireWire 400 ports to transmit and receive data at 400/200/100
Mbps. It provides a single-lane 2.5 Gbps PCI Express interface on the host side, and comes with
the built-in driver supported by Windows and Mac.
INSTALLATION
1. Turn off the power to the computer system.
2. Insert the host board into an available PCI Express slot.
3. Connect the Y-type power cable to the PCI board and system power supply.
4. Turn the power back on.
5. The applicable device driver will be installed automatically.
SPECIFICATIONS
Port Specifications
• Two FireWire 400 ports; 6-pin female connector
• Data transfer rates of 400 Mbps, 200 Mbps and 100 Mbps
• Texas Instruments chipset
• Single 3.3 V or 5 V operation
• 12 V / 1 A bus power connector, 3.5 x 1.3 x 9 mm

• Compliant with PCI specification Rev 2.2 (32-bit, 33 MHz), IEEE 1394a OHCI
specifications release 1.1 and IEEE Std. 1394a-2000
• Built-in FIFO for isochronous transmit (2048 Bytes), asynchronous transmit (2048 Bytes) and
receive (3072 Bytes)
Bus Specifications
• PCI Express Card x1
• Texas Instruments chipset
• Bus speed: 2.5 Gbps
• Fully compliant with PCI Express specifications 1.0a
• 3.3 V and 5 V
System Requirements
• Windows 98/Me/2000/XP or Mac OS 10 or above
• PCI Express-enabled system with an available PCI Express Card slot
Package Contents
• FireWire 400 PCI Express Card, two ports, x1 lane
• Regular and low-profile brackets
• Y-type power cable
• User manual

www.manhattan-products.com
Are you completely satisfied with this product?
Please contact your MANHATTAN® dealer with comments or questions.
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.