Marantz SR1010 User manual

EER en Bean BRE ZZ *
Model SR1010/SR1020 User Guide
[SSS ee ee
Tuner Amplifier

ENGLISH
WARRATY
For warranty information, contace your focal Marantz distributor.
RETAIN YOUR PURCHASE RECEIPT
Your purchase receipt is your permanent record of a valuable purchase. tt
should be kept in a safe place to be referred to as neccessary for insurance
purposes or when corresponding with Marantz,
IMPORTANT
When seeking warranty service, it is the responsibility of the consumer to
establish proof and date of purchase. Your purchase receipt or invoice is
adequate for such proof,
FOR U.K. ONLY
This undertaking is in addition to a consumer's statutory rights and does not
affect those rights in any way.
GARANTIE
Pour des informations sur fa garantie, contacter te distributeur local Marantz,
CONSERVER L'ATTESTATION D'ACHAT
Uattestation d'achat est la preuve permanente d'un achat de valeur. La
conserver en lieu sur pour s'y reporter aux fins d’obtention d'une couverture
d'assurance ou dans le cadre de correspondances avec Marantz.
IMPORTANT
Pour l'obtention d'un service couvert par la garantie, il incombe au client
d'établir la prewve de l'achat et d'en corroborer la date. Le regu ou la facture
constituent des preuves suffisantes,
GARANTIE
Bel Garantiefragen wenden Sie sich bitte an Ihren Marantz-Handler.
HEBEN SIE IHRE QUITTING GUT AUF
Dia Quittung dient Ihnen als bleibende Unterlage fOr Ihren wertvollen Einkaut
Das Aufbewahren der Quittung ist wichtig, da die darin enthaltenen Angaben
fr Versicherungswacke oder bei Korrespondenz mit Marantz angefdhrt werden
mOssen.
WICHTIG!
Bei Garantiefragen mu der Kunde eine Kaufunterlage mit Kaufdatum vorlegen.
Ihren Quittung oder Rechnung ist als Unterlage ausreichend.
NEDERLANDS
GARANTIE
Voor inlichtingen omtrent garantie dient u zich tot uw plaatseliike Marantz,
UW KWITANTIE, KASSABON E.D. BEWAREN
Uw kwitantie, kassabon e.d. vormen uw bewijs van aankoop van een waardevol
artikel en dienen op een vellige plats bewaard te worden voor evt, verwijzing
bijy, in verbend met verzekering of bij correspondentie met Marantz.
BELANGRIWK
Bij een evi, beroep op de garantie is het de verantwoordelijkheid van de
consument een gedateerd bewijs van aankoop te tonen. Uw kassabon of
jactuurziin voldoende bewiis
GARANTIA
Para obtener informacion acerca de la garantia pdngase en contacto con su
distribuidor Marantz.
GUARDE SU RECIBO DE COMPRA
Su recibo de compra es su prueba permanente de haber adquiride un aparato
Ge valor, Este recibo deberd guardarlo en un lugar seguro y utilizarlo como
referencia cuando tenga que hacer uso del seguro o se ponga en contacto
con Marantz.
IMPORTANTE
Cuando solicite el servicio otorgado por fa garantia et usuario tiene la
responsabilidad de demenstrar cuando efectué la compra, En este caso, su
recibo de compra seré la prueba apropiada.
Condizioni di garanzia
Uapparecchio e’ garantito per 365 giorni dalla data di acquisto comprovata da
un documento attestante il nominative det rivenditore e ta data di vendita, La
garanzia sara’ prestata con la sostituzione o riparazione gratuita delle parti
difettose.
Non sono coperti da garanzia difetti derivanti da uso improprio, errata
installazione, manutenzione effettuata da personale non autorizzato 0,
comunque, da circostanze che non possano riferirsi a difetti di tunzionamento
dell'apparecchio. Sono inoltre esclusi dalla garanzia gli interventi inerenti
Iinstallazions ¢ l'allacciamento agli impianti di alimentazione.
Gli apparecchi verranno riparati presso i nostri Centri di Assistenza. Le spese
ed I rischi di trasporto sono a carico det cliente.
La casa costruttrice declina ogni responsabilita’ per danni diretti o indiretti
provocati dalla inosservanza delle prescrizioni di installazione, uso @
manutenzione dettagliate nel presente manuale,
Per informazioni sull'abbonamento al Servizio Assistenza postgaranzia @ pet
conoscere 'indirizzo dei Centri Assistenza Marantz rivolgetevi al nostro servizio
consumatoti (telefono 1678-20026 - numero verde).
GARANTIA
Para informagdes sobre a garantia, contactar 0 distribuidor Marantz local.
GUARDAR O RECIBO DE COMPRA
© recibo € 0 registo permanente da compra que fez. Deve ser guardado num
local seguro, para ser apresentado em questées relacionadas com 0 seguro
ou para quando tiver de contactar a Marantz.
IMPORTANTE
Quando procurar assisténcia técnica ao abrigo da garantia, 6 da
responsabilidade do consumidor estabelecer a prova 8 daa de compra, O
recibe € prove adequada.
GARANTI
For information om garantin. kontakta Marantz lokalagent.
SPAR KVITTOT
Kvittot 4r ett inkopsbevis p& en vardefull vara. Det skalf forvaras sakert och
‘hanvisas till vid forsakringsfall eller vidkorrespondens mod Marantz.
VIKTIGT
F6 att garantin skal galia ar det kundens sak att framstalla bevis och datum om
kopet. Kvitto eller faktura 4 tillrokligt bevis f deta,

CONTENTS LIST
English... + page 2
Frangais........... ..page 15
DOUtSCD.......cecccsreres we Seite 29
Nederlands .... . pagina 44
Espafiol ..pagina 57
italiano .... «pagina 70.
POMUQUES: eicsicecccseteteiatetsosasets pagina 84
SVENSKA. eee sssesesstesesensecesseeesssnecsnsnseeessecsanneeee -.Sidan 98
Specifications «page 111
Figures. page 112
ENGLISH: This unit meets the requirements of EEC Recommendation 82/499.
FRANCAIS: Cet appareil ext conforme aux directives 82/499 de la CEE.
DEUTSCH; Dises Gerat entspricht der EWG-Empfehlung 82/499,
NEDERLANDS: Dit apparaat voldoet aan de eisen van Aanbeveling EEG 82/499.
ESPANOL: Este aparato cumple los requisitos establecidos en la directiva 82/499 de la
CEE.
ITALIANO: Questo apparecchio é conforme ai requisiti della direttiva CEE 82/499.
PORTUGUES: — Esta unidade foi concebida e manufacturada em conformidade com a
Recomendagao 82/499 de Comunidade Econémica Europeia.
SVENSKA: Denna apparat 6verenstammer med bestammelsema i EEC 82/499.
“Este aparato lleva elementos antiparasitarios necesarios para cumplir con los limites que se estableren
en el Anexo V del Reglamento sobre Pertubaciones Radioelectricas e Interferencias aprobado en el Real
Decreto 138/1989. (B.0.£ de 9 de Febrero 1989).”.

CONTENTS
FOREWORD..
Warnings
Equipment mains wor!
Important ...
How to connect a plug
Copyright
About this user guide
PRECAUTIONS
General precauations
FEATURES ...
CONNECTIONS
Connection of D-BUS Remote Contro! Bus
System Connection through AL-Bus ......
CONNECTORS AND CONTROL BUTTONS ON THE MAIN UNIT
CONTROL BUTTONS ON THE REMOTE CONTROL ..
1. Remote control operation range
2. Loading baatteries ....
Functions available with Al-Bus System Connection ...
PLAYING A PROGRAMME SOURCE
TUNER OPERATION ....
PRESET MEMORY OPERATION
Manual preset memory (remote control only)
Auto preset memory (main unit only)
Station name preset
Recalling a station from the preset memory (remote control only) ....
Preset scan tuning (remote control only) .
Clearing the preset memory (remote control only)
PRESENT TIME SETTING
Button Operation ...
Cleaning the Time .
Program Timer Setting .....
Caution in Timer Play ...
The set timer porgrams can be cancelled temporarily when they are not required
Checking Timer Program Contents ..
Clearing Timer Program (remote control only)
Sleep timer Setting (remote control only)
TROUBLESHOOTING
CARE AND MAINTENANCE
Cleaning of equipment external surfaces
Fuse replacement
Repairs ..

FOREWORD
This section must be read before any connection is made to
the mains supply.
l
WARNINGS
Do not expose the equipment to rain or moisture.
Do not remove the cover from the equipment.
Do not push anything inside the equipment through
, the ventilation holes
Do not handle the mains lead with wet hands.
EQUIPMENT MAINS WORKING SETTING
Your Marantz product has been prepared to comply with the
household power and safety requirements that exist in your area.
"102" Version product can be powered by 230 V AC only.
105" or “/07” Version product can be powered by 240 V AC
only.
On the rear panel of the “/01” Version product, a voltage
selector (2-position.or 4-position) is provided. Be sure to set
the voltage selector to the mains voltage of your area before
using the unit.
IMPORTANT:
This apparatus is fitted with an approved moulded 13 Amp
plug. To change a fuse in this type of plug proceed as follows:
4, Remove fuse cover and fuse.
2, Fix new fuse which should be @ BS1362 5A, A.S.T.A. or
BSI approved type.
3, Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, It
should be cut off and an appropriate plug fitted in its place.
{f the mains plug contains a fuse, this should have a value of
5A. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 5A.
NOTE:
The severed plug must be destroyed to avoid a possible
shock hazard should it be inserted into a 13A socket elsewhere.
HOW TO CONNECT A PLUG
The wires In the mains lead are coloured in accordance with
the following code:
BLUE—"NEUTRAL” (“N")
BROWN—"LIVE” (“L")
1. The BLUE wire must be connected to the terminal which is
marked with the letter "N" or coloured BLACK.
2. The BROWN wire must be connected to the terminal which
is marked with the letter "L" or coloured RED
3, Do not connect either wires to the earth terminal in the
plug which is marked by the letter "E" or by the safety earth
symbol == or coloured green or green-and-yeliow,
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead — not simply over
the two wires
COPYRIGHT
Recording and playback of any material may require consent.
For further information refer to the following:
~~ Copyright Act 1956
— Dramatic and Musical Performers Act 1958
— Performers Protection.Acts 1963 and 1972
— any subsequent statutory enactments and orders.
ABOUT THIS USER GUIDE
Refer to the diagrams on page 113 at the rear of this user
guide.. The numbers on the diagrams correspond to those in
the text. All references to the connections and controls that
are printed in BOLD type are as they appear on the unit.
PRECAUTIONS
The following precautions should be taken when operating
the equipment.
GENERAL PRECAUTIONS.
When siting the equipment ensure that:
— the ventilation holes are not covered;
— air is allowed to circulate freely around the equipment
— itis on a vibration free-surface;
— it will not be exposed to interference from an external
source;
— it will not be exposed to excessive heat, cold, moisture or
dust;
— it will not be exposed to direct sunlight;
— it will not be exposed to electrostatic discharges
Never place heavy objects on the equipment.
if a foreign body or water does enter the equipment, contact
your nearest dealer or service centre.
Do not pull out the plug by pulling on the mains lead, hold the
plug.
It is advisable when leaving the house, or during a
thunderstorm, to disconnect the equipment from the mains
supply.
FEATURES
* Top-end models of the Slim Line Series
This model has a very slim shape and a height of 68 mm. All
buttons except for the contro! knobs are conceald behind a
front flap. {SR1020)
* High power output of 50 W + 50 W (DIN, Into 8 ohms)
The discrete configuration is characterised by a high level of
reliability.
© Door open/close mechanism operates by means of a
touch sensor (SR1020)
* 30-Station random preset tuner
Station names consisting of 5 characters can be stored
together with the frequencies.
© Independent/System operation switch
This unit can be operated as a system component in
combination with a CD player and tape deck of the Marantz
Slim Line Series
« 2-Program Timer/Sleep Timer
« System remote control
The remote control supplied with this unit can also be used to
operate the CD player and tape deck of the Marantz Slim
Line Series.
In this manual, the controls on the main unit are enclosed in a
circle, e.g. ©, and the controls on the remote control are
enclosed in a square, ¢.g.
re]

CONNECTIONS
Connection of D-BUS Remote Control Bus
This unit is equipped with the remote control bus function. By
connecting it to Marantz system components equipped with
remote control (D.BUS/RC-5) jacks, such as a CD player and
tape deck, these components can be remote controlied from
this unit.
Connect the D.BUS OUT jack of this unit to the REMOTE
CONT. BUS IN jack of another component using an RCA-type
pin lead.
Note:
© If the connected component with the remote control
(D.BUS/RC-5) jacks has an iNT/EXT switch on the rear
panel, set the switch to EXT.
SR1020 rear panel
CD player
rear panel
* Set to INT.
If this unit is to be connected to a CD player and tape deck of
the Marantz Slim Line Series, refer to “Systern Connection
through AL-Bus” Shown in below figure.
SYSTEM (AL-BUS)
Receiver SR1010/SR1020
AUDIO BUS
REMOTE BUS
System Connection through AL-Bus
* Use the following connections if this unit is to be used in
combination with the Marantz Slim Line Series
components.
Note:
If these components are to be stacked, always observe the
stacking order shown in this illustration, that is, the receiver
‘on top, the CD player in the middle and the tape deck at the
bottom.
Do not use this AC OUTLET when the unit is
combined with the Marantz Slim Line Series
components.
elf the mains lead of the CD player or tape
deck is connected to this AC OUTLET,
efficient operation cannot be guaranteed.
Mains power plug
CD Player CD1010/CD1020
AUDIO BUS
Set to SYSTEM
Mains power plug
Tape Deck SD1010/SD1020
Set to SYSTEM
Mains power plug

CONNECTORS
AND
CONTROL
BUTTONS
ON
THE
MAIN
UNIT
iO) Terminal for FM antenna, 75 ohms
For
connecting
an
external
FM
antenna
with
a
circular
plug,
or
for
connecting
a
cable
network.
@
Terminals
for
AM
antenna
and
earthing
To
connect
the
AM
loop
antenna
supplied,
use
the
terminais
marked
‘AM’
and
‘GND’.
In
areas
where
the
AM
loop
antenna
gives
unsatisfactory
results,
it
is
recommended
that
the
receiver
be
connected
to
an
outdoor
antenna.
Use
the
terminal
marked
‘AM’
for
this.
An
earthing
lead
can
be
connected
to
the
terminal
marked
"GND"
to
reduce
interference
further.
®
TUNING
STEP
selector
(SR1020/1A
and
$R1010/1B
only)
This
switch
changes
the
step
when
the
tuner
searches
for
the
next
station
up
and
down
the
scale.
IN
Europe
this
switch
should be set to “8 KHz”.
@)
FM
DE-EMPHASIS
switch
(SR1020/1A
and
$R1010/1B
only)
This
unit
is
equipped
with
switchable
de-emphasis.
This
switch
works
in
conjunction
with
the
TUNING
STEP
selector
switch.
The
de-emphasis
is
set
to
“50uS”
when
the
unit
leaves
the
factory.
©) PHONO input jacks
Connect
to
the
output
jacks
of
record
player
using
a
Moving-
Magnet-type
cartridge.
An
earth
terminal
for
connecting
the
earth
wire
of
the
turntable
is
provided,
|f
hum
or
other
noise
is
observed
as
a
result
of
earth
wire
connection,
do
not
connect
the
earth
wire.
® CD input jacks
Connect
to
the
audio
output
jacks
of
a
CD
player.
@® AVX 1/AUX 2 input jacks
Connect
to
the
audio
output
jacks
of
the
second
CD
player,
second
tape
deck,
etc.
DCC input/output jacks
Connect
the
IN
jack
to
the
output
jack
of
a
DCC
deck,
and
the
OUTjack
to
its
input
jack.
@® TAPE input/output jacks
Connect
the
IN
jacks
to
the
output
jacks
of
a
tape
deck,
and
the
OUT
jacks
to
its
input
jacks.
(Q SPEAKER SYSTEM terminais
Connect
the
left
and
right
speaker
feads,
observing
the
+
and
—
polarity
of
the
leads
and
terminals.
@ D.BUs jacks
Connect
to
a
component
equipped
with
remote
control
(D.BUS/RC-5)
jacks.
(Refer
to
page
4)
ie) REMOTE control switch
This
switch
selects
the
remote
control
operation
mode.
Set
to
SYSTEM
when
the
unit
is
being
used
in
combination
with
a
CD
player
and
tape
deck
of
the
Marantz
Slim
Line
Series.
® ac ourTLeT
Use
this
mains
power
outiet
to
power
another
component.
The
power
supply
from
the
AC
OUTLET
is
turned
ON/OFF
by
switching
the
power
of
this
unit
ON/OFF
with
the
POWER
‘switch
on
the
front
panel
or
the
POWER
switch
of
the
remote
control.
The
power
consumption
of
the
component
connected
to
the
AC
OUTLET
must
not
exceed
100.W.
(} Main POWER switch
Press
this
switch
to
turn
the
power
supply
to
this-unit
ON,
and
press
again
to
turn
it
OFF.
When
this
switch
is
in
the
ON
position,
the
power
of
the
unit
can
be
switched
ON/OFF
with
the
POWER
switch
on
the
front
panel
or
with
the
POWER
switch
on
the
remote
control.
The
main
POWER
switch
should
normally
be
eft
in
the
pushed-in
ON
position,
4 ® Mains lead
Connect to a mains power outlet.
4® Touch sensor (SR1020 only)
When
this
elongated
button
is
touched
lightly,
the
front
flap
opens
or
closes
automatically.
@® POWER switch
Press
to
turn
power
ON
and
press
again
to
tum
it
OFF.
The
clock
is
displayed
while
the
POWER
switch
is
OFF.
48 CLOCK button
Press
to
enter
the
clock
display
mode.
If
this
button
is
pressed
while
the
POWER
switch
is
ON,
the
display
changes
to
the
clock
display
and
then
returns
to
the
previous
display
in
5
seconds.
(9 TIMER button
This
button
is
used
when
setting
a
timer
program
or
checking
the
timer
program
contents
after
setting
the
timer.
It
is
also
used
to
cancel
a
set
value.
@ F/P (Frequency/Preset) button
Press
this
button
to
select
whether
frequencies
or
preset
numbers
are
to
be
displayed.
@ AM/PM and Station Name button
This
button
is
used
when
setting
the
clock
or
the
timer
function.
Press
to
alternate
between
AM
and
PM
or
to
switch
between
the
12-hour
display
mode
and
the
24-hour
display
mode.
When
the
tuner
source
is
selected,
pressing
this
button
sets
a
station
name.
@ wiM+ and H/M— buttons
These
buttons
are
used
when
setting
the
clock
or
the
timer
function.
@ BAND button
Press to alternate between FM and AM.
@ «up and ¥ DOWN buttons
Press
these
buttons
to
change
the
tuner
frequency
or
preset
channels.
These
buttons
are
also
used
to
enter
alphanumeric
characters
during
timer
setting
or
station
name
preset
opera-
tion.
® Function buttons
Press
this
button
to
select
the
source
to
be
played
or
recorded.
The
selected
source
name
appears
in
the
display.

@ Display
This panel shows information on'the status of the unit.
TIMER]
Timer indicator
COP D-T: Tape copy indicator
SLEEP}. SLEEP indicator
Preset SCAN indicator
: Tuned indicator
STEREO indicator
H FM AUTO/AUTO memory indicator
: Memory indicator
“I~: Function/Station name/Clock indicator
Frequency/Preset indicator
SGOosSesg@GO8o
:
VOLume control
This knob adjusts the volume.
@ BALance control
This rotary dial adjusts the balance between the left and right
speakers and headphones.
@ PHONES jack
For connecting a pair of stereo headphones.
Plugging in the headphones turns the speaker sound off.
@)_ MEMO button
This button is used to store frequency preset, timer setting
data, preset station name and clock data in the memory.
@ copy button
Press to copy sound from DCC to TAPE. The sound can be
copied regardless of the source being played.
NOTE:
This button is invalid wnen a component of the Marantz Slim
Line Series is connected through the AL-Bus.
@ Infrared sensor
The infrared signal from the remote control enters the unit
through this window. When remote controlling the unit, point
the remote contro! transmitter toward this window.
cz} BASS/TREBLE tone controls
The bass and treble frequencies can be controlled by turning
the respective controls. Turning a control clockwise toward +
enhances the corresponding frequencies and turning it
counterclockwise toward — attenuates them.
BASS: Controls the tone of low frequencies.
TREBLE: Controls the tone of high frequencies.
CONTROL BUTTONS ON THE REMOTE
CONTROL
POWER switch
Press thé switch to turn the power of the unit ON. Pressing
the switch again turns the power OFF and the unit enters the
standby mode.
This switch also turns the power output from the AC OUTLET
on the rear panel ON/OFF.
2} Function buttons
CD, PHONO, FM/AM (iuner), DCC, TAPE, AUX 4/TV and
AUX 2/LD.
These buttons select the source to be played or recorded.
3) Numeric buttons 1 to 9
These buttons are used fo enter figures in the selection of a
tuner preset station, to set the clock or to set select a CD
track number, etc. The functions of these buttons are
dependent on the function button selected.
4) O/CL button
This button is used to enter the number “O” as well as to
cance! various operations.
5) Control buttons
Play (>), Stop (a), Pause (H), FF (me), REW (<4).
These buttons are used when operating the CD player, TAPE
deck, DCC deck, etc.
The functions of these buttons are dependent on the function
button selected.
6] MODE 1/A button
The function of this button is dependent on the function
button selected, as described below.
When CD is selected:
Disc + (used to select a disc in the CD changer).
When TAPE or DCC is selected:
Deck A
(used to select deck A of a double cassette deck).
When TUNER is selected:
FIP
(used to select whether frequencies or preset numbers.
are to be displayed).
When AUX 1/TV is selected:
Video
(used to switch the TV input between VIDEO and TV).
When AUX 2/LD is selected:
Side A (used to select side A of LD).
When a VCR is selected:
Auto Tracking (used to select auto tracking of VCR).
7) MODE 2/B button
The function of this button is dependent on the function
button selected, as described below.
When CD is selected:
Disc — (used to select a disc in the CD changer).
When TAPE or DCC is selected:
Deck B
(used to select deck B of a double cassette deck).
When TUNER is selected:
Preset Scan (used to receive all of the tuner preset
stations sequentially).
When AUX 1/TV is selected:
PIP (used to select the Picture-In-Picture Function).
When AUX 2/LD is selected:
Side B (used to select side B of LD).
The foliowing table shows the functions of the MODE buttons
Band.
CD |TAPE/DCC | TUNER | . TV LO VCR
[BIMODE-1/A |DISC + | DECKA | F/P/CH |VIDEO|SIDE A| AUTO-Tr:
DISC -| DECKB |P.SCAN| PIP |SIDEB CNTICLK |

ca)
[8} TIMER button
Its function is the same as the TIMER button on the main unit.
This button is used in combination with the numeric buttons
and [4], +/— buttons [10] and MEMO button [fi].
9] CLOCK button
The function of this button is the same as that of the CLOCK
button (8 of the main unit.
This button is used in combination with the numeric buttons
3] and (@} and the MEMO button fii].
0] +/— buttons
11] MEMO button
This button is used when setting a timer program or the clock.
To set a timer program, press the TIMER button [8] first. To
set the clock, press the CLOCK button [S] first. Then use the
numeric buttons, +/— buttons and MEMO button.
[2] SLEEP button
Press to set the sleep timer,
13] P/CH &/¥ buttons
These buttons are used to increase/decrease the tuner preset
number, increase/decrease the CD track number or to go to
the next/previous track on a TAPE.
The function of this button is dependent on the function
button [2] selected
[4] VOLUME 4/¥ buttons
These buttons vary the listening volume. Press the + button
to increase It and the -- button to decrease It.
15} MUTE button
Press to mute the sound from the speakers. When this button
is pressed, the speakers are muted and “MUTE” appears on
the display of the main unit. Pressing the button again
cancels the muting function, which can also be cancelled by
pressing one of the function buttons.
(16) SYSTEM/DOOR/TRAY buttons ($R1020)
* |f components of the Marantz Slim Line Series are
connected through the AL-Bus, the SYSTEM button allows
the doors on the system components to be opened or
closed
NOTE:
The SYSTEM button is invalid if the components are not
connected through the AL-Bus.
* Pressing the DOOR button opens or closes the doors on
the system components.
To open or close the CD door alone, first press the CD
function button [2] then press the DOOR button. To open
or close the cassette door alone, first press the TAPE
function button [2} then press the DOOR button.
* Pressing the TRAY button opens or closes the CD tray or
the cassette tray. To open or close the CD tray, first press
the CD function button [2], then press the TRAY button.
The cassette door can be opened or closed with a similar
operation.
® If the PHONO input is selected using the remote controller,
the door of the SR1020 cannot be opened or closed from
the remote controller.
It can be opened or closed if the function button selected
before the PHONO button is pressed has been AUX 4,
AUX 2 or AM/FM.
[17] PROG button
This button is used to store a preset station in the memory or
to program a CD track.
8] MODE/«» button
The function of this button is.dependent on the function
button [2] selected, as described below.
When CD is selected:
Repeat (used to repeat the same tracks).
When TAPE or DCC is selected:
Direction (used to select side A or B).
When tuner is selected:
Stereo/Mono {used to switch the tuner reception mode
between stereo and mono).
When AUX 1/TV is selected:
Bilinguat (used to select the TV audio multiplex mode).
When AUX 2/LD is selected:
Sound {used to select the LD audio mode).
When a VCR is selected:
Bilingual (used to select the VCR audio mode).
CD |ACC/DCC| TUNER Tv Lb | VCR
MODE/4> |REPEAT| <> ST/MONO | BILIN | SOUND | BILIN
[19] DCC REC button (Append)
When this button is pressed, the deck advances the new tape
to be recorded until the start position of the recordable tape
and enters the record-pause mode. If recording is to. be
started from the middle of a tape, the deck searches the
position where the previous recording was ended and enters
the record-pause mode.
20) TAPE REC button
Press to REC PAUSE.
21) REC-CANCEL button
Press to cancel the record mode of the tape deck or DCC
deck
The deck rewinds iape io the recording start point, performs
the same operation as Rec muting then enters the record-
pause mode.
22} PAUSE (II) button
Press to pause playback or recording of the TAPE deck or
DCC deck.
For details, refer to the instruction manual of your TAPE deck
or DCC deck.
23, DISPLAY button
The function of this button is dependent on the function
button [2] selected, as described below
When CD's selected:
Time (used to switch the displayed time between
elapsed time and remaining time).
When DCC is selected:
Text (with DCC, used to display character information)
When TUNER is selected:
Text (invalid).
When AUX 1/TV is selected:
OSD (used to conirol the on-screen display of TV).
When AUX 2/LD is selected:
OSD (used to control the on-screen display of LD).
When a VCR is selected:
Slow (used for slow playback of videotape).
* For details, refer to the instruction manuais of the
components used in your system.

RANDOM button
The function of this button is dependent on the function
button 2] selected.
When CD is selected:
Random (used for random playback).
When DCC is selected:
Time (with DCC, used to switch the time display mode).
When TUNER is selected:
Invalid.
When AUX 1/TV Is selected:
Size (used to switch the picture size with a wide-screen
TY).
When AUX 2/LD is selected:
Invalid
When a VCR is selected:
Slow + (used in slow playback of videotape).
The following table shows the functions of buttons 23 and 24.
co |tapepcc| Tv | to | vor
@ovise.ay| TIME | TEXT | osp| oso | slow
Gil RANDOM sci pecks | size’ - |slow+
1. Remote control operation range
The remote control should be operated at a distance of less
than 5 m from the infrared sensor of the unit. Be careful not to
point the transmitter of the remote control in any direction
other than towards the infrared sensor and ensure that there
are no obstacles between the transmitter and infrared sensor,
for these may make remote control operation impossible.
2. Loading batteries
The batteries in the remote control have a service life of about
one year under normal use. When the remote control is not to
be used for a long period of time, be sure to remove the
batteries. If the remote contro! power seems to be weakened,
replace the batteries before they are exhausted.
4) Remove the battery cover by pushing the tab.
“—.
2) Load batteries with the correct + (positive) and —
(negative) polarities
Use two R03 (UM-4) dry
I) cel batteries
3) Click the battery cover back into position.
ae
SZ
The RC1020SR Remote control is capable of controlling
Marantz system components equipped with the D-Bus or AL-
Bus jacks, such as a CD player and tape deck as well as this
unit. Refer to “Connection of D-BUS Remote Control Bus” on
page 4 or to “System Connection through AL-Bus” on page 4
and make the appropriate connections before proceeding to
system control operation.
An example procedure for system operation is described
below. Here, the case in which a CD player is connected to
this unit through the AL-Bus is taken as an example.
4, Press the POWER switch [J to turn the power of this unit
ON.
2. Press the CD function button [2] to set the remote’ control
to CD mode.
3. Press the “5” numeric button :3] to select track number 5 of
the CD.
4. Press the Play » contro! button [5] to play the CD.
5. Press the VOLUME 4/¥ buttons {4 to adjust the listening
volume.
6. Press the Stop m control button iS] to stop the CD,
7. Press the POWER switch [1] to turn the power OFF.
* As described above, pressing one of the function buttons
[2] of the remote control switches the remote control mode
so that the CD player, tape deck or DCC deck can be
controlled (Play, Stop, Pause, etc.),
Functions available with AL-Bus System Connection
The numbers of controls and buttons on the main unit are
enclosed In ©, and those on the remote control are enclosed
in.
1. Synchronized power ON/OFF
Switching the POWER switch @/[1] ON/OFF also turns
ON/OFF the power of the CD player.and tape deck
connected through the bus system connection.
2. Synchronized door open/close (SR1020 only)
Pressing the DOOR button [18 of the remote control opens
or closes the doors of the components in the system
3. Auto operation
When the tape deck or CD player is operated, the system
switches over automatically to the component which is
playing.
4. Simple connection
The system can be connected very easily with a small
number of cables.
Note:
lf the AL-Bus system connection has been made, it is not
possible to dub DCC sound onto cassette tape while playing
another source. Dubbing is possible only when the source
being played is the dubbing source