Marcy ECLIPSE UB9000 User manual

NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
MARCY ECLIPSE UB9000
Safety Notice
DEVELOPER UTILITY
Important Assembly
Information
BENCH
Care and Maintenance
Parts List
Warranty
Ordering Parts
Model
UB9000
Retain This
Manual for
Reference
01092016
OWNER'S
IMPORTANT: Please read this manual before commencing
assembly of this product.
MANUAL

www.puretecfitness.com
1
TABLE OF CONTENTS
BEFORE YOU BEGIN.................................................................................................1
IMPORTANT SAFETY NOTICES ...............................................................................2
EXERCISE GUIDELINES............................................................................................3
WARNING LABEL PLACEMENT................................................................................ 5
IMPORTANT ASSEMBLY INFORMATION.................................................................6
CARE AND MAINTENANCE, WEIGHT CAPACITY, OPERATING NOTES................7
PARTS LIST ...............................................................................................................8
EXPLODED DIAGRAM..............................................................................................10
WARRANTY ...............................................................................................................11
ORDERING PARTS.................................................................................................... 11
BEFORE YOU BEGIN
Thank you for selecting the MARCY Eclipse UB9000 Developer Utility
Bench. For your safety and benefit, read this manual carefully before using
the equipment. As a distributor, we are committed to provide you complete
customer satisfaction. If you have any questions, or find there are missing or
damaged parts, we guarantee you complete satisfaction through direct
assistance. To avoid unnecessary delays, please contact our after-sales
department, Monday to Friday 9am – 5pm GMT.
Pure-Tec Limited
Tel: [phone]
Monday - Friday 0800 – 1700 GMT
www.puretecfitness.com
Email: [e-mail]

www.puretecfitness.com
2
IMPORTANT SAFETY NOTICE
This exercise equipment is built for optimal safety. However, certain precautions apply
whenever you operate a piece of exercise equipment. Be sure to read the entire manual
before you assemble or operate your equipment. In particular, note the following safety
precautions:
1. Keep children and pets away from the equipment at all times. DO NOT
leave children unattended in the same room with the equipment.
2. Only one person at a time should use the equipment.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms, STOP the workout at once. CONSULT A PHYSICIAN
IMMEDIATELY.
4. Position the equipment on a clear, leveled surface. DO NOT use the equipment
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the equipment. Running
or aerobic shoes are also required when using the equipment.
7. Use the equipment only for its intended use as described in this manual.
DO NOT use attachments not recommended by the manufacturer.
8. Do not place any sharp object around the equipment.
9. Disabled person should not use the equipment.
10. Before using the equipment to exercise, always do stretching exercises to
properly warm up.
11. Never operate the equipment if the equipment is not functioning properly.
12. A spotter is recommended during exercise.
13. This equipment is designed and intended for home and consumer use only, not for
commercial use.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR
DOCTOR. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF
35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL
INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. PURE-TEC LIMITED
ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE
SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.

www.puretecfitness.com
3
EXERCISE GUIDELINES
Building Muscle and Gaining Weight
Unlike aerobic exercise, which emphasizes endurance training, anaerobic exercise focuses on
strength training. A gradual weight gain can occur while building the size and strength of muscles.
While developing muscle mass, your body adapts to the stress placed upon it. You can modify your
diet to include foods such as meat, fish and vegetables. These foods help muscles recover and
replenish important nutrients after a strenuous workout.
Muscle Strength and Endurance
To achieve the greatest benefit from exercise, it is important to develop an exercise program that
allows you to work all of the major muscle groups equally.
To increase muscles strength; follow this principle:
Increasing resistance and maintaining the number of repetitions of an exercise results in increased
muscle strength.
To tone your body, follow the principle: Decreasing resistance plus increasing the number of
repetitions of an exercise results in increased body tone.
Once you feel comfortable with an exercise, you can change the resistance, the number of
repetitions, or the speed at which you do the exercise. It is not necessary to change all three
variables. For example, let’s say that you are training at 22kgs and performing the exercise 10 times
in 3 minutes. When this becomes too easy, you may decide to move up lifting 27kgs for the same
number of repetitions in the same amount of time. Lifting more weights fewer times most often
develops muscle strength. To gain both muscle strength and endurance, it is recommended that you
perform each exercise 15 to 20 reps per set.
Training Intensity
How hard you begin to train depends on your overall level of fitness. The soreness you experienced
can be lessened by decreasing the load you place on your muscles and by performing fewer sets. To
avoid injury, you should gradually work into an exercise program and set the load to your individual
fitness level. The load should increase as your fitness level increases.
Muscle soreness is common, especially when you first start exercising. If you are painfully sore for a
long time, it may be time to change your program. Eventually, your muscle system will become
accustomed to the stress and strain placed on it.

www.puretecfitness.com
4
Beginning a Strength Building Program
Warming Up
To begin strength training, it is important to stretch and perform light exercise for 5 to 10 minutes.
This helps prepare the body for more strenuous exercise by increasing circulation, raising your body
temperature and developing more oxygen to your muscles.
Workout
Each workout to keep in mind that muscle soreness that lasts for a long period in not desirable and
may mean that injury has occurred.
Cool Down
At the end of each workout, perform slow stretching exercises for 5 to 10 minutes. Ease into each
stretch only going as far as you can. This stage allows your muscles wind down after training.
To provide a total workout program it is also recommended that 2 to 3 days of aerobic exercise is
performed in addition to the strength training.
Drinking Water
For the body to function properly, it must be properly hydrated. If you are exercising, you should
increase your fluid intake. The reason for this is that the water you take in will leave your system
through the sweating mechanism that cools your body during exercise. The water you lose through
exercise must be replaced so that the muscles can recover properly.
Rest Day
Although you may not feel like doing it, taking a rest day at least once a week is important because it
gives your body a chance to heal itself. Continuously working your muscle will result in over training
which will not benefit in the long run.

www.puretecfitness.com
5
WARNING LABELPLACEMENT
Apply the labels in the location shown.

www.puretecfitness.com
6
IMPORTANT ASSEMBLY INFORMATION
 Tools Required for Assembling the Bench: Adjustable Wrench and Allen Wrench.
 NOTE: It is strongly recommended that this equipment is assembled by two or more
people to avoid possible injury.
 Ensure Carriage Bolts are inserted through the SQUARE holes on components that need to
be assembled. Attach washer only to end of the Carriage Bolt.
 Use Allen Bolts or Hex Bolts inserted through the ROUND hole on components that need to
be assembled.
 Always wait until all bolts are assembled onto the bench before tightening the bolts. Do not
tighten each bolt right after it is installed
Fasten Nuts and Bolts
Securely tighten all Nuts and Bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivoting function.
Make sure all pivoting components are able to move
freely.
Do not tighten all Nuts and Bolts in this step.

www.puretecfitness.com
7
CARE AND MAINTENANCE
1. Lubricate moving parts with WD-40 or light oil periodically.
2. Inspect and tighten all parts before using the equipment.
3. The equipment can be cleaned using a damp cloth and mild non-abrasive detergent.
DO NOT use solvents.
4. Examine the equipment regularly for signs of damages or wear.
5. Replace any defective components immediately and/or keep the equipment out of use until
repair.
6. Failure to examine regularly may affect the safety level of theequipment.
WEIGHT CAPACITY AND DIMENSION
1. Maximum user weight: 135kg.
2. Maximum weight capacity (including user weight): 270kg.
3. Assembled Dimension: 165 x 59 x 118 cms
BACKREST ADJUSTMENTANGLES
Backrest adjustment angle ranges from -270 to 760.

www.puretecfitness.com
8
UB9000 PARTS LIST
PART
NO.
DESCRIPTION
SIZE
QUANTITY
1
Main Frame
1
2
Front Post
1
3
Rear Base
1
4
Leg Developer Holder
1
5
Leg Developer
1
6
Seat Bracket
1
7
Backrest Support
2
8
Backrest Incline Support
1
9
Seat Incline Support
1
10
Front Post Bracket
1
11
Incline Adjustment Base
2
12
Bracket
4 ¾” x 2”
1
13
Foam Tube
3
14
Seat Pad
1
15
Backrest Board
1
16
Foam Roll
6
17
Foam Roll End Cap
6
18
Olympic Sleeve
1
19
Rubber Bumper
Ø1 1/8” x 1 1/8”
1
20
End Cap
Ø 1”
1
21
Roller Wheel
2
22
Leg Developer Bushing
2
23
Spring Clip
Ø 1 7/8”
1
24
Spring Clip
Ø 7/8”
1
25
Lock Knob
M18
1
26
Sleeve
2” x 1 ¾”
1
27
End Cap
1 ¾” x 1 ¾”
4
28
End Cap
1” x 1”
8
29
Rubber Bumper
Ø ¾” x 1 1/8”
2
30
L-shaped Lock Pin
1
31
Carriage Bolt
M10 x 2 ¾”
4
32
Allen Bolt
M10 x 2 ¾”
3
33
Allen Bolt
M10 x 3 ½”
1
34
Allen Bolt
M10 x 4 7/8”
1
35
Allen Bolt
M10 x 6 7/8”
1
36
Hex Bolt
M12 x 6 7/8”
1
37
Allen Bolt
M8 x 1 5/8”
10
38
Spacer
Ø 1” x Ø 3/8”
1
39
Washer
Ø 1”
2

www.puretecfitness.com
9
40
Washer
Ø ¾”
16
41
Washer
Ø 5/8”
12
42
Aircraft Nut
M12
1
43
Aircraft Nut
M10
10
44
Aircraft Nut
M8
2
Allen Wrench
6#
1
Allen Wrench
5#
1
Allen Wrench
4#
1

www.puretecfitness.com
10
EXPLODED DIAGRAM

www.puretecfitness.com
11
LIMITED WARRANTY
Pure-Tec warrants this product to be free from defects in workmanship and material, under normal use and
service conditions, for a period of two years on the frame and one year on all other parts and components
from the date of purchase. This warranty extends only to the original purchaser. Pure-Tec’s obligation under
this Warranty is limited to replacing damaged or faulty parts at Pure-Tec’s option.
All returns must be pre-authorised by Pure-Tec. This warranty does not extend to any product or damage to a
product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage,
purchasers own repairs or for products used for commercial or rental purposes. No other warranty beyond
that specifically set forth above is authorized by Pure-Tec.
Pure-Tec is not responsible or liable for indirect, special or consequential damages arising out of or in
connection with the use or performance of the product or other damages with respect to any economic loss,
loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other
consequential damages or whatsoever natures.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein.
Your statutory rights are not affected.
ORDERING REPLACEMENT PARTS
Replacement parts can be ordered by calling our After-Sales Department Monday to Friday 8am to
5 pm
GMT.
Pure-Tec Limited
Tel: [phone]
Monday - Friday 0800 – 1700 GMT
www.puretecfitness.com
Email: [e-mail]
When ordering replacement parts, please give the following information.
1. Model
2. Description of Parts
3. Part Number
4. Date of Purchase