Marine PC WPD Series User manual

User Manual
WPD Series
MPC-WPD12 - MPC-WPD15 - MPC-WPD17 - MPC-WPD19
WPD User Manual Rev.A 2-2020


Hereisaneasy‐to‐locateformtorecordtheunit’sserialnumber,andfromtheinvoice,recordtheinvoicedate.Theunit’sserial
numberislocatedonthebackpanel.

Iftheuniteverrequiresservice,pleaserefertothisinformationwhencontactingtheMarinePCServiceCenter.

Product Name Serial Number Invoice Date


ThisMarinePCUserManualisprovided“as‐is”,withoutwarrantyofanykind,eitherexpressedorimplied,includingbutnotlimitedtotheimpliedwarrantiesor
merchantabilityandfitnessforaparticularpurpose.


TheinformationinthisUserManualissubjecttochangewithoutpriornoticeinordertoimprovereadabilityandreliabilityaswellasdesignandfunction.These
changesshallbeincorporatedinanewrevision,availablefromtheproductand/ordownloadsectionoftheMarinePCwebsite,www.marinepc.com.


InnoeventshallMarinePCbeliablefordirect,indirect,specialincidentalorconsequentialdamagesarisingoutoftheuseofortheinabilitytouseMarinePC’s
productoritsdocumentation,evenifadvisedofthepossibilityofsuchdamages.


Productnamesmentionedhereinareusedforidentificationpurposesonlyandmaybetrademarksand/orregisteredtrademarksoftheirrespectivecompanies.


Thisdocumentcontainsproprietaryinformationprotectedbycopyright.Allrightsarereserved.Nopartofthismanual,inwholeorpart,maybereproducedbyany
means,inanyform,withoutpriorwrittenpermissionofMarinePC.


I. Checking the Components
II. Buttons and Indicators
1. Button Description
Button Name Description
① Menu button OSD Menu / Exit OSD Menu
② Source button Select the input source.
③
-Down Navigate to next menu on Sub Menu.
-Up Navigate to previous menu on Sub Menu.
④ Dimmer Turn Power On & Off (Press 1 second)
⑤ Power button Adjust the luminance of back light
① ② ③ ④ ⑤
Adjustment menu
DC power cable
(10 feet)
CVBS Cable
(10 feet) DVI-Circular
Cable (4 feet)
(Option)
D-SUB15-Circular
Cable (4 feet)
(Option)

III. Connecting Cable
1. Power and I/Os
2. Connecting Cables
1) Connect a power cord to the DC power connector.
2) Connect the monitor to an equipment using appropriate cables.
3) Turn on the monitor first before turning on the device.
2. Dimensional diagram (Typ. 17” Shown)
406mm(15.98") x 370mm(14.57") x 60mm(2.36")
USB (Touch, Option)
DC-IN DVI-I RGB

IV. OSD Menu
You can use the OSD to adjust the picture quality, OSD position and general settings.
For advanced settings, please refer to the following page.
To select a menu item, press the menu button.
1. Key Navigation and Control
1) Entering the OSD menu
2) Making Adjustments and setting.
Use the up/down/ buttons to select the main menu. Press ‘left/right button to move to
sub-menu.
3) Exiting the Adjustment menu
Press the 'SEL' button to close the menu screen.
2. OSD Menu Description
2-1. Color Mode
-. Adjust the brightness, Contrast and Sharpness of the monitor.
Item Description
Brightness Adjust the brightness of image.
Backlight Adjust the value or backlight.
Contrast Adjust the Contrast of image.
Color Temp. Adjust user’s color settings.

Item Description
Transparency Adjust the transparency of OSD window.
OSD Timeout Adjust OSD off time when key input is not detected.
OSD Position Set the display position of OSD on the screen
2-2. Adjust Mode
-. Adjust the monitor’s color temperature and gamma.
2-3. OSD Mode
-Set the language displayed on the menu and the location of the OSD screen.
2-4. Function Mode
-. Adjust OSD Transparency, OSD off time, and OSD position.
.
2-4. Sound Mode
-. Adjust OSD Transparency, OSD off time, and OSD position.
Item Description
Auto Config Adjust auto Config
H Position Adjust H Position setting
V Position Adjust V Position setting
Phose Adjust Phase Offset
Clock Adjust Clock Offset
Item Description
Language Adjust language
H Position OSD window up/down
V Position OSD window up/down
OSD Timeout Adjust OSD off time when key input is not
detected
Transparent Adjust transparent
Item Description
Volume Volume adjustment
Mute Mute on/off

V. Specification
MODEL MPC-WPD12 MPC-WPD15 MPC-WPD17 MPC-WPD19
Panel
Size (Diagonal) 12.1” 15” 17” 19”
Backlight LED LED LED LED
Resolution 1024 x 3(RGB) x 768 1024 x 3(RGB) x 768 1280 x 3(RGB) x 1024 1280 x 3(RGB) x 1024
Number of Pixels 786,432 786,432 1,310,720 1,310,720
Support Colo
r
16.2 Million 16.2 Million 16.7 Million 16.7 Million
Brightness Max. 1000 cd/m² Max. 1000 cd/m² Max. 1000 cd/m² Max. 1000 cd/m²
V
iewing Angle 160°(H) / 150°(V) 160°(H) / 150°(V) 160°(H) / 140°(V) 160°(H) / 150°(V)
Response Time 25/10 ms (Tr/Tf) 5/11ms (Tr/Tf) 20/10ms (Tr/Tf) 20/10ms (Tr/Tf)
Contrast Ratio 800:1 (Typ.) 1000:1 (Typ.) 1000:1 (Typ.) 1000:1 (Typ.)
Panel Sur
f
ace Anti-reflective Coating Anti-reflective Coating Anti-reflective Coating Anti-reflective Coating
Input
Video
V
G
A
(Circular connector) Input Input Input Input
DVI-I
(Circular connector) Input Input Input Input
Power
Power Supply External brick power
supply
External brick power
supply
External brick power
supply
External brick power
supply
Input Voltage DC 9-38V
12,24,28 VDC normal
DC 9-38V
12,24,28 VDC normal
DC 9-38V
12,24,28 VDC normal
DC 9-38V
12,24,28 VDC normal
Power Consumption Max. 25W Max. 30W Max. 40W Max. 48W
Misc.
Operating Temperature -30°C~70°C -30°C~70°C -30°C~70°C -30°C~70°C
Operating Humidity 0%~100% 0%~100% 0%~100% 0%~100%
Design
Dimensions
(W)X(H)x(D) mm 335x296x60 ±2 384x340x60 ±2 415x383x60 ±2 452x441x60 ±2
IP Rating IP65 (NEMA 6 Splashproof)
User Controls OSD Control by control buttons