Mark Fitness XM-7609 User manual

Owner’s Manual
8/09
XM-7609
45 DEGREE
HYPEREXTENSION

Table of Contents
Important Safety Information
Before You Start
Assembly
Parts List
Exploded View
Warranty Information
2
3
4
5-10
11
12
13

NOTE: Hand tighten bolts and nylon nuts until machine is fully
assembled.
SAFETY PRECAUTIONS
SAFETY INFORMATION WARNING!
Prior to assembly, remove components from the box and verify that all the listed parts
were supplied.
Before using this unit or starting any exercise program, consult your physician.
This is especially important for persons over the age of 35 and/or persons with pre-
existing health problems. XMARK Fitness assumes no responsibility for personal
injury or property damage sustained by or through the use of this product.
It is the owner’s responsibility to ensure that all users of this unit have read the
Owner’s Manual and are familiar with safety information and precautions.
• This unit should only be used on a level surface and is intended for indoor use
only. XMARK Fitness recommends an equipment mat be placed under the unit to
protect the floor or carpet and for easier cleaning.
• Wear comfortable, good-quality walking or running shoes and appropriate cloth-
ing. Do not use this unit with bare feet, sandals, socks or stockings!
• Always examine your unit before using to ensure all parts are in working order.
• Do not leave children unsupervised near or on the unit.
• Service to your unit should only be performed by an authorized service represen-
tative, unless authorized and/or instructed by a XMARK Fitness technician. Failure
to follow these instructions will void the warranty.
Important Safety Information
3

MODEL: XM-7609
This manual will guide you through the assembly process. If at any time you
are having trouble with the assembly or use of this product, then please contact
When calling please have the following product information available:
Model Name :
Date Mfg.:
Serial #
Model Name Decal Location
Before You Start
REGISTRATION CARD
QUESTIONS?
CALL 1-800-719-4605
Monday-Friday
8:30 a.m.-5:00 p.m.
(Central Standard Time)
MAILING ADDRESS
7501 Trammel Drive
Shreveport, LA 71108
4
THANK YOU for making this unit a part of your exercise
program.
XMARK Fitness assures the very best in value,
appearance, durability and biomechanics.
XMARK FITNESS SERIES
XMARK Fitness
To avoid unnecessary delays in warranty parts and to insure that a permanent
record of your purchase is on file with our company, be sure to send in the war-
ranty registration card or register online at www
.xmarkfitness.com within 10 days
of purchase.
us at our
XMARK Fitness help line. We have trained service technicians on site to
take care of you, our valued customer.

Assembly
5

Assembly
NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
Step 1
Attach the "T" Base Frame (#2) to the "U" Base Frame (#1) using:
• two M10*80 Button Head Cap Screw (#19)
• four Φ11*Φ20*1.5 Flat Washer (#23)
• two M10 Nylon lock Nut (#22)
6

Assembly
NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
Step 2
Attach the Main Frame (#3) to the "T" Base Frame (#2) using:
• two M10*80 Button Head Cap Screw (#19)
• four Φ11*Φ20*1.5 Flat Washer (#23)
• two M10 Nylon lock Nut (#22)
7

Assembly
NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
Step 3
Attach the Foam Tube (#7) and two Foam Padding (#9) to the Main Frame (#3) using:
• two Metal End Cap (#11)
• two Plastic Washer (#28)
8

Assembly
NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
Step 4
Attach the Adjustment Frame (#4) to the Main Frame (#3), and lock into place using Pop Pin (#6) and
Knob Bolt (#5).
9

20
20
20
23
23
23
23
13
13
20
4
Assembly
NOTE: Wrench tighten bolts and Nylon Lock nuts.
Step 5
Attach two Chest Pads (#13) to the Adjustment Frame (#4) using:
• four M10*30 Button Head Cap Screw (#20)
• four Φ11*Φ20*1.5 Flat Washer (#23)
10

Ref # Part # Description Qty
Parts List
XM-7609 Parts List
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
P00198
P00380
P00199
P00200
P00571
P00203
P00050
P00153
P00061
P00183
P00062
P00138
P00063
P00201
P00541
P00383
P00249
P00381
P00613
P00598
P00636
P00561
P00031
P00136
P00560
P00022
P00154
P00140
M00001
H00015
"U" Base Frame, XM-7609
"T" Base Frame, XM-7609
Main Frame, XM-7609
Adjustment Frame, XM-7609
Knob Bolt
Pop Pin XM Series
Foam Tube, XM Series
Foot Cap,Right 50.8 XM Series
Foam Padding, Φ110*Φ22*180 XM Series
Plug 50.8
Metal End Cap
Glide Sleeve
Chest Pad
Hand Grip
Round Plug 25
End Cap w/ Wheel 60
Plug 50.8*76.2
Non Skid Pad
Button Head Cap Screw M10*80
Button Head Cap Screw M10*30
Button Head Cap Screw M8*25
Nylon Lock Nut M10
Flat Washer Φ11*Φ20*1.5
Flat Washer Φ9*Φ16*1.6
Hex key S=6
Wrench 17-19
Foot Cap, Left 50.8 XM Series
Plastic Washer
Owner's Manual XM-7609
Bolt Pack, XM-7609
1
1
1
1
1
1
1
2
2
3
2
2
2
2
2
2
2
2
4
4
4
4
12
4
1
1
2
2
1
1
11

Exploded View
12

XMARK Fitness
7501 Trammel Drive
Shreveport, LA 71108
Customer Service: 1-800-719-4605