
Safety Instructions
Please read these instructions thoroughly before you
use the device and keep them for future reference.
Only for indoor use.
•Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
•This product is not a toy. Keep out of reach of
children.
•Never connect a power adapter if it's damaged. In
such cases, please contact your supplier.
•Never open the product: the device may contain parts
with deadly voltage.
•Repairs or service should only be performed by
qualified personnel.
•Using damaged or inappropriate lights or fittings
carries the risk of electric shocks.
•Before installation, turn off the mains power and let
lamps cool down before replacement.
Requirements
This light bulb is not suitable for use with conventional
dimmers.
This product requires a stable working Wi-Fi network
(username/ password) connected to the internet.
Installation of the Smart me app
Download and install the Marmitek Smart me app from
the Apple app store or the Google Play store.
Launch the Smart me app after installation is completed.
Follow the instructions and register for a new account.
Installation of the Power SE
•Plug the Smart Power plug into the electrical wall
socket.
•The light indicator should start flashing quickly. If it’s
not flashing, hold the button for 5-6 seconds until it
begins flashing.
•Launch the Smart me app from your smart phone or
tablet.
•Click on the + (upper right corner) to add a new
device, confirm if the light indicator flashes quickly
and follow the instructions.
•Press Help button during installation for more
information or when installation fails.
Notes for using the product
•After the installation is completed you can control and
configure the Power adapter by using the app.
•After the installation is completed you can control and
configure the light bulb using the app.
•When the light bulb is switched of by the conventional
light switch, it cannot be operated anymore by app,
timers or preprogramed smart scenarios.
•Check our website www.marmitek.com for more
details and how to use the Smart me products.
Technical specifications
Power outlets 1x 100-240V socket
Max output
IEC plug type F 3450 Watt
IEC plug type E 3450 Watt
IEC plug type G 3000 Watt
IEC plug type J 2300 Watt
Max current
IEC plug type F 15 A
IEC plug type E 15 A
IEC plug type G 13 A
IEC plug type J 10 A
Wireless technology Wi-Fi 2.4GHz
Power 100-240 VAC 50/60 Hz
Standby power < 0.5 Watt
Dimensions 72 x 52 x 35 mm, excl. plug
Declaration of Conformity
Hereby, Marmitek BV, declares that the
Power SE is in compliance with the essential
requirements of the 2014/53/EU Directives.
Full Declaration of Conformity is available at
www.marmitek.com/en/declarations-of-conformity/
More detailed user guide and instructions are available
on our website at www.marmitek.com