Marson MT8200H User manual

MT8200H User’s Manual V2.1
MT8200H
2D Handheld Scanner
User’s Manual
Version 2.1 DATE: 2023/11/24

MT8200H User’s Manual V2.1
2
Table of Content
CHAPTER 1 INTRODUCTION ............................................................................................................................................... 7
SPECIFICATIONS ............................................................................................................................................................................ 7
BEEPER INDICATION....................................................................................................................................................................... 9
LED INDICATION ............................................................................................................................................................................ 9
CHAPTER 2 GENERAL SETTINGS.................................................................................................................................... 10
BARCODE CONFIGURABILITY (SETUP CODE).............................................................................................................................. 10
FACTORY DEFAULT...................................................................................................................................................................... 10
CHECK VERSION .......................................................................................................................................................................... 10
GOOD READ INDICATOR .............................................................................................................................................................. 11
Beep Tone ............................................................................................................................................................................. 11
Vibrator................................................................................................................................................................................... 11
Indicator LED......................................................................................................................................................................... 11
DATA FORMAT.............................................................................................................................................................................. 12
UTF-8 to Unicode Conversion ............................................................................................................................................ 12
Country Code Page.............................................................................................................................................................. 12
HT/CR/ESC Converts to TAB/ENTER/ESCAPE ............................................................................................................. 13
Function Code Conversion.................................................................................................................................................. 13
Control Code Output Method .............................................................................................................................................. 13
Numeric Key .......................................................................................................................................................................... 15
OPOS ..................................................................................................................................................................................... 16
Capital Lock Mode................................................................................................................................................................ 16
IMAGING SETTINGS ...................................................................................................................................................................... 17
Inverse Barcode.................................................................................................................................................................... 17
Centering................................................................................................................................................................................ 17
CHAPTER 3 INTERFACE..................................................................................................................................................... 18
USB HID...................................................................................................................................................................................... 18
Keyboard Layout................................................................................................................................................................... 18
Intercharacter Delay ............................................................................................................................................................. 20
Interblock Delay .................................................................................................................................................................... 20
USB VCP .................................................................................................................................................................................... 21
Baud Rate .............................................................................................................................................................................. 21
Data Bits & Parity.................................................................................................................................................................. 22
Stop Bits................................................................................................................................................................................. 22
Handshaking.......................................................................................................................................................................... 23
ACK/NAK ............................................................................................................................................................................... 23
CHAPTER 4 READING MODE ............................................................................................................................................ 24
TRIGGER MODE ........................................................................................................................................................................... 24
CONTINUOUS MODE .................................................................................................................................................................... 24
AUTO-SENSING MODE ................................................................................................................................................................. 24

MT8200H User’s Manual V2.1
3
Auto-sensing Mode – Magnetic Switch ............................................................................................................................. 25
LED Auto-Off Timeout.......................................................................................................................................................... 25
CHAPTER 4 DATA FORMAT............................................................................................................................................... 26
CODE ID....................................................................................................................................................................................... 26
SET ID.......................................................................................................................................................................................... 26
DATA LENGTH .............................................................................................................................................................................. 30
PREAMBLE.................................................................................................................................................................................... 30
POSTAMBLE.................................................................................................................................................................................. 30
Clear Preamble/Postamble ................................................................................................................................................. 31
TERMINATOR ................................................................................................................................................................................ 31
CHAPTER 6 SYMBOLOGIES.............................................................................................................................................. 32
GENERAL SETTINGS .................................................................................................................................................................... 32
UPC-A ......................................................................................................................................................................................... 32
Enable/Disable UPC-A......................................................................................................................................................... 32
Lead Digit (Number System)............................................................................................................................................... 32
Check Digit ............................................................................................................................................................................ 33
UPC-A Expand to EAN-13 .................................................................................................................................................. 33
Add On Supplement ............................................................................................................................................................. 33
UPC-E ......................................................................................................................................................................................... 34
Enable/Disable UPC-E......................................................................................................................................................... 34
Lead Digit (System Number)............................................................................................................................................... 34
Check Digit ............................................................................................................................................................................ 34
UPC-E Expand to UPC-A .................................................................................................................................................... 35
Add On Supplement ............................................................................................................................................................. 35
Enable/Disable UPC-E1 ...................................................................................................................................................... 36
EAN-8.......................................................................................................................................................................................... 36
Enable/Disable EAN-8 ......................................................................................................................................................... 36
Check Digit ............................................................................................................................................................................ 36
Add On Supplement ............................................................................................................................................................. 37
EAN-13........................................................................................................................................................................................ 38
Enable/Disable EAN-13 ....................................................................................................................................................... 38
Check Digit............................................................................................................................................................................ 38
ISBN ....................................................................................................................................................................................... 38
Add On Supplement ............................................................................................................................................................. 38
CODE 128 .................................................................................................................................................................................... 40
Enable/Disable Code 128.................................................................................................................................................... 40
ISBT 128 Concatenation ..................................................................................................................................................... 40
CODE 128 MIN/MAX LENGTH ...................................................................................................................................................... 40
GS1-128...................................................................................................................................................................................... 41
Enable/Disable GS1-128 ..................................................................................................................................................... 41
GS1-128 MIN/MAX LENGTH ....................................................................................................................................................... 41

MT8200H User’s Manual V2.1
4
CODE 39 ...................................................................................................................................................................................... 42
Enable/Disable Code 39 ...................................................................................................................................................... 42
Verification ............................................................................................................................................................................. 42
Start/Stop ............................................................................................................................................................................... 42
Full ASCII Code39................................................................................................................................................................ 43
Code39 Min/Max Length ..................................................................................................................................................... 43
CODE 32 ...................................................................................................................................................................................... 44
Enable/Disable Code 32 ...................................................................................................................................................... 44
CODE 93 ...................................................................................................................................................................................... 45
Enable/Disable Code 93 ...................................................................................................................................................... 45
Code 93 Min/Max Length .................................................................................................................................................... 45
CODE 11 ...................................................................................................................................................................................... 46
Enable/Disable Code 11 ...................................................................................................................................................... 46
Verification ............................................................................................................................................................................. 46
Code 11 Min/Max Length .................................................................................................................................................... 46
CODABAR (NW-7)........................................................................................................................................................................ 47
Enable/Disable Codabar...................................................................................................................................................... 47
Verification ............................................................................................................................................................................. 47
Start/Stop ............................................................................................................................................................................... 47
Codabar Min/Max Length .................................................................................................................................................... 48
Concatenation ....................................................................................................................................................................... 48
INTERLEAVED 2OF 5.................................................................................................................................................................... 49
Enable/Disable Interleaved 2 of 5 ...................................................................................................................................... 49
Verification ............................................................................................................................................................................. 49
Interleaved 2 of 5 Min/Max Length..................................................................................................................................... 50
STANDARD 2OF 5(IATA)............................................................................................................................................................ 51
Enable/Disable Standard 2 of 5.......................................................................................................................................... 51
Standard 2 of 5 Min/Max Length ........................................................................................................................................ 51
MATRIX 2OF 5............................................................................................................................................................................. 52
Enable/Disable Matrix 2 of 5 ............................................................................................................................................... 52
Matrix 2 of 5 Min/Max Length.............................................................................................................................................. 52
INDUSTRIAL 2OF 5....................................................................................................................................................................... 53
Enable/Disable Industrial 2 of 5.......................................................................................................................................... 53
Industrial 2 of 5 Min/Max Length ........................................................................................................................................ 53
NEC 2OF 5.................................................................................................................................................................................. 54
Enable/Disable NEC 2 of 5.................................................................................................................................................. 54
Verification ............................................................................................................................................................................. 54
NEC 2 of 5 Min/Max Length ................................................................................................................................................ 55
MSI PLESSEY............................................................................................................................................................................... 56
Enable/Disable MSI Plessey............................................................................................................................................... 56
Verification ............................................................................................................................................................................. 56
MSI Plessey Min/Max Length ............................................................................................................................................. 57

MT8200H User’s Manual V2.1
5
GS1 DATABAR............................................................................................................................................................................. 58
Enable/Disable GS1 DataBar ............................................................................................................................................. 58
GS1 DATABAR LIMITED............................................................................................................................................................... 58
Enable/Disable GS1 DataBar Limited ............................................................................................................................... 58
GS1 DATABAR EXPANDED.......................................................................................................................................................... 58
Enable/Disable GS1 DataBar Expanded .......................................................................................................................... 58
GS1 DataBar Expanded Min/Max Length......................................................................................................................... 59
GS1 COMPOSITE ......................................................................................................................................................................... 59
Enable/Disable GS1 Composite ......................................................................................................................................... 59
Enable/Disable UPC/EAN Version GS1 Composite........................................................................................................ 59
UPC/EAN Version GS1 Composite Required .................................................................................................................. 60
CHINA POST ................................................................................................................................................................................. 60
Enable/Disable China Post.................................................................................................................................................. 60
China Post Min/Max Length ................................................................................................................................................ 60
KOREA POST................................................................................................................................................................................ 61
Enable/Disable Korea Post ................................................................................................................................................. 61
Check Digit ............................................................................................................................................................................ 61
Korea Post Min/Max Length................................................................................................................................................ 61
OTHER POSTAL CODES ............................................................................................................................................................... 62
Enable/Disable Other Postal Codes .................................................................................................................................. 62
PLANET CODE .............................................................................................................................................................................. 63
Check Digit ............................................................................................................................................................................ 63
POSTNET...................................................................................................................................................................................... 63
Check Digit ............................................................................................................................................................................ 63
AUSTRALIAN POST....................................................................................................................................................................... 64
Interpretation ......................................................................................................................................................................... 64
QR CODE /MICRO QR CODE ..................................................................................................................................................... 65
Enable/Disable QR Code / Micro QR Code...................................................................................................................... 65
QR Code / Micro QR Code Min/Max Length .................................................................................................................... 65
DATA MATRIX............................................................................................................................................................................... 66
Enable/Disable Data Matrix................................................................................................................................................. 66
Data Matrix Min/Max Length ............................................................................................................................................... 66
PDF417....................................................................................................................................................................................... 67
Enable/Disable PDF417 ...................................................................................................................................................... 67
PDF417 Min/Max Length..................................................................................................................................................... 67
MICROPDF417............................................................................................................................................................................ 68
Enable/Disable MicroPDF417............................................................................................................................................. 68
MicroPDF417 Min/Max Length ........................................................................................................................................... 68
AZTEC........................................................................................................................................................................................... 69
Enable/Disable Aztec ........................................................................................................................................................... 69
Aztec Min/Max Length ......................................................................................................................................................... 69
MAXICODE ................................................................................................................................................................................... 70

MT8200H User’s Manual V2.1
6
Enable/Disable MaxiCode ................................................................................................................................................... 70
MaxiCode Min/Max Length.................................................................................................................................................. 70
CHINESE SENSIBLE CODE (HAN XIN).......................................................................................................................................... 71
Enable/Disable Chinese Sensible Code ........................................................................................................................... 71
Chinese Sensible Code Min/Max Length .......................................................................................................................... 71
CODABLOCK A............................................................................................................................................................................. 72
Enable/Disable Codablock A .............................................................................................................................................. 72
Codablock A Min/Max Length ............................................................................................................................................. 72
CODABLOCK F.............................................................................................................................................................................. 73
Enable/Disable Codablock F............................................................................................................................................... 73
Codablock F Min/Max Length ............................................................................................................................................. 73
CHAPTER 7 APPENDIX ....................................................................................................................................................... 74
APPENDIX –NUMBERS ................................................................................................................................................................ 74
APPENDIX –UPPER CASE ALPHABETS ....................................................................................................................................... 75
APPENDIX –LOWER CASE ALPHABETS....................................................................................................................................... 77
APPENDIX –CONTROL CODES .................................................................................................................................................... 79
APPENDIX –SYMBOLS ................................................................................................................................................................. 81
APPENDIX –FUNCTION KEYS ...................................................................................................................................................... 84
APPENDIX –NAVIGATION KEYS ................................................................................................................................................... 85
APPENDIX –MODIFIER KEYS....................................................................................................................................................... 86
APPENDIX –ABORT ..................................................................................................................................................................... 87
APPENDIX –DEFAULT TABLE ...................................................................................................................................................... 88
APPENDIX –FACTORY ID AND AIM ID TABLE............................................................................................................................. 94
APPENDIX –ASCII TABLE ........................................................................................................................................................... 96
VERSION HISTORY............................................................................................................................................................ 100

MT8200H User’s Manual V2.1
7
Chapter 1 Introduction
This user’s manual is dedicated to MT8200H, a powerful 2D handheld barcode scanner that
delivers high scanning performance on all major 1D and 2D barcodes. With MT8200H at hand
user can literally scan any barcode on any surface in any condition. MT8200H has many features
that make scanning barcode easier and more comfortable such as mobile barcode readability,
ambient light immunity and ergonomic design.
Specifications
Optic & Performance
Light Source 640nm visible red LED
5000K CCT White LED
Sensor
640 x 480
Resolution 5mil (Code39/ 1D barcode)
6.67MIl (PDF417/ 2D barcode)
Scan Angle Horizontal 37.8°
Vertical 28.8°
LED Indicator
Scan Button
(Trigger)

MT8200H User’s Manual V2.1
8
Pitch Angle
±45°
Skew Angle
±45°
Roll Angle
360°
Print Contrast Ratio
30%
Width of Field
116mm (13Mil Code39)
Typical D.O.F
(Environment: 800 lux)
5Mil Code 39: 36 ~ 159mm
13Mil UPC: 46 ~ 325mm
20Mil QR Code: 38 ~ 248mm
6.67Mil PDF417: 36 ~ 132mm
10Mil Data Matrix: 33 ~ 131mm
Physical Characteristics
Dimension
W71 x L166 x H84 mm
Weight
172g
Color
Black or White
Material
ABS
Cable
2.1M Interchangeable USB Cable
Trigger
Scan Button
Indicator
LED, Buzzer, Vibrator
Electrical
Operation Voltage
5 VDC ± 5%
Working Current
< 210mA
Standby Current
< 85mA
Connectivity
Interface/ Profile
USB HID
USB VCP
User Environment
Operating Temperature
-10 ~ 40˚C
Storage Temperature
-20 ~ 65˚C
Humidity
0% ~ 95%RH (Non-condensing)
Drop Durability
1.5M
Sealing
IP42
Ambient Light
100,000 Lux (Sunlight)
1D Symbologies
Code 39, Full ASCII Code39, Code 32,
Codabar, Interleaved 2 of 5, IATA 2 of 5,
Matrix 2 of 5, Industrial 2 of 5, NEC 2 of 5,
Code 11, MSI,EAN
-8, EAN-13, UPC-A,
UPC
-E, Code 93, Code 128, ISBT 128,
GS1
-128, GS1 Databar, GS1 Composite
2D Symbologies
Codablock A, Codablock F, PDF417,
MicroPDF417, Aztec, Data Matrix,
MaxiCode, QR Code, Micro QR Code,

MT8200H User’s Manual V2.1
9
Chinese Sensible
Code (Han Xin)
Postal Codes
Australian Post, British Post, Canadian
Post, China Post,
Japanese Post, Korea
Post, Netherlands Post, Planet Code,
Postnet
Regulatory
ESD
Functional after 4KV contact, 8KV air
discharge
EMC/RF
TBA
Safety Approval
EN/IEC62471 (Exempt Group)
Environmental
RoHS 2.0
Beeper Indication
Beeper Status
Single long beep
Power up
Single beep
Good read
Single short beep
The scanner reads a Code39 ASCII during
multi-step configuration
Two beeps
The scanner successfully reads a
configuration barcode
Three short beeps
The scanner reads a barcode while
disconnected
The scanner reads an unexpected barcode
during multi-step configuration. (Please
scan “
Abort
” and start over)
LED Indication
LED Status
One blue flash
Good read

MT8200H User’s Manual V2.1
10
Chapter 2 General Settings
Barcode Configurability (Setup Code)
Scanning below configuration barcodes will allow/prohibit user to change settings by scanning
configuration barcodes in this manual.
Enable Barcode Configurability*
Disable Barcode Configurability
Factory Default
Scanning below configuration barcode will reset all parameters to factory default settings (the ones
with *asterisk mark)
Factory Default
Check Version
To check firmware version, please scan below configuration barcode.
Check Version

MT8200H User’s Manual V2.1
11
Good Read Indicator
Beep Tone
Off
Beep Low (2.0KHz)
Beep Medium (2.7KHz)*
Beep High (4.0KHz)
Vibrator
Off*
On
Indicator LED
Off
On*

MT8200H User’s Manual V2.1
12
Data Format
UTF-8 to Unicode Conversion
Disable UTF-8 to Unicode*
Enable UTF-8 to Unicode
(Word)
Country Code Page
West European Latin*
Japanese, Shift-JIS
(Notepad / Excel)
Japanese, Shift-JIS
(Word)
Traditional Chinese, Big5
(Notepad / Excel)
Traditional Chinese, Big5
(Word)
Note: Code pages define the mapping of character codes to characters. To display the proper
characters for the barcode being scanned, please select the appropriate code page. For Shift-JIS
and Big5 to output properly, please make sure to disable UTF-8 to Unicode Conversion.

MT8200H User’s Manual V2.1
13
HT/CR/ESC Converts to TAB/ENTER/ESCAPE
Off*
On
Note:
1. By default, HT [$I], CR [$M] and ESC [%A] is transmitted as <0x09>, <0x0D> and <0x1B>
respectively.
2. When enabled, HT [$I], CR [$M] and ESC [%A] is transmitted as <TAB>, <ENTER> and
<ESCAPE> on keyboard respectively.
Function Code Conversion
Off
On*
Note:
Once disabled, the scanner will output the original encoded data of the barcodes in Appendix –
Function/Navigation/Modifier Keys.
Control Code Output Method
Ctrl Mode* Alt Mode

MT8200H User’s Manual V2.1
14
Disable Output
Note:
Control code (0x01 ~ 0x1F) can be sent by two methods:
(1) Ctrl Mode:
A barcode of “A<HT>F” (0x41/0x09/0x46) is scanned, the output sequence is:
a. Enter “A” – Press A key
b. Enter “Ctrl + I” – Since 0x09 corresponds to “CtrI + I”, virtual keyboard will press and hold
Ctrl key, press I key, and release Ctrl key and I key
c. Enter “F” – Press F key
Since “Ctrl+I” is shortcut for italicizing text in some software applications, the result of above
output sequence can be a regular A plus an italic F.
(2) Alt Mode:
For <HT>, the output sequence of virtual keyboard is:
Enter “Alt + 0 + 0 + 0 + 9” – Virtual keyboard will press and hold Alt key, press “0”, “0”, “0” and
“9” on numeric keypad respectively, and release Alt key.
Control Code Table
ASCII
Hex
Dec
Ctrl Mode
Alt Mode
NUL
00
0
Ctrl+Shift+2
Alt+0+0+0+0
SOH
01
1
Ctrl+a
Alt+0+0+0+1
STX
02
2
Ctrl+b
Alt+0+0+0+2
ETX
03
3
Ctrl+c
Alt+0+0+0+3
EOT
04
4
Ctrl+d
Alt+0+0+0+4
ENQ
05
5
Ctrl+e
Alt+0+0+0+5
ACK
06
6
Ctrl+f
Alt+0+0+0+6
BEL
07
7
Ctrl+g
Alt+0+0+0+7
BS
08
8
Ctrl+h
Alt+0+0+0+8
HT
09
9
Ctrl+i
Alt+0+0+0+9
LF
0A
10
Ctrl+j
Alt+0+0+1+0
VT
0B
11
Ctrl+k
Alt+0+0+1+1
FF
0C
12
Ctrl+l
Alt+0+0+1+2

MT8200H User’s Manual V2.1
15
CR
0D
13
Ctrl+m
Alt+0+0+1+3
SO
0E
14
Ctrl+n
Alt+0+0+1+4
SI
0F
15
Ctrl+o
Alt+0+0+1+5
DLE
10
16
Ctrl+p
Alt+0+0+1+6
DC1
11
17
Ctrl+q
Alt+0+0+1+7
DC2
12
18
Ctrl+r
Alt+0+0+1+8
DC3
13
19
Ctrl+s
Alt+0+0+1+9
DC4
14
20
Ctrl+t
Alt+0+0+2+0
NAK
15
21
Ctrl+u
Alt+0+0+2+1
SYN
16
22
Ctrl+v
Alt+0+0+2+2
ETB
17
23
Ctrl+w
Alt+0+0+2+3
CAN
18
24
Ctrl+x
Alt+0+0+2+4
EM
19
25
Ctrl+y
Alt+0+0+2+5
SUB
1A
26
Ctrl+z
Alt+0+0+2+6
ESC
1B
27
Ctrl+[
Alt+0+0+2+7
FS
1C
28
Ctrl+\
Alt+0+0+2+8
GS
1D
29
Ctrl+]
Alt+0+0+2+9
RS
1E
30
Ctrl+Shift+6
Alt+0+0+3+0
US
1F
31
Ctrl+Shift+-
Alt+0+0+3+1
Numeric Key
Numeric Key
Alphanumeric Key*
Note:
1. By default, the alphanumeric key is used for 15ransmitting digits. Scan NUMERIC KEY if you
want to use the keys on the numeric keypad.
2. If you select NUMERIC KEY, the Num Lock status of the physical keyboard should be ON.

MT8200H User’s Manual V2.1
16
OPOS
Off*
On
Note:
To function properly with OPOS, the host PC must be installed with OPOS driver or demo program,
which is available from our website.
Capital Lock Mode
Capslock Off* Capslock On
Capslock Free
Note:
When in Capslock On, the scanner inverses case or cancels out the Capslock state of keyboard.
When scanner is set to Capslock Free mode, no matter keyboard Capslock LED indicator is ON or
OFF, output will be always the same as the original barcode. In other words, what you see is what
output is.

MT8200H User’s Manual V2.1
17
Imaging Settings
Inverse Barcode
Disable Inverse Barcode*
Enable Inverse Barcode
Centering
Disable Centering* Enable Centering
Note:
When enabled, the scanner only decodes the barcodes marked by aimer dot.

MT8200H User’s Manual V2.1
18
Chapter 3 Interface
USB HID
USB HID
Keyboard Layout
English (US)* English (UK)
Danish Spanish
Hungarian (QWERTZ) Hungarian (QWERTY)
Canadian French Dutch

MT8200H User’s Manual V2.1
19
Italian French
German Swiss German
Swiss French Swedish
Czech (QWERTZ) Czech (QWERTY)
Norwegian Belgian
Portuguese Slovak
Brazilian (QWERTY) Canadian (Traditional)

MT8200H User’s Manual V2.1
20
Japanese
Alt Code
Intercharacter Delay
The configurable range is from 0 to 255ms. The larger the number, the longer the delay.
Set Intercharacter Delay
(Default = 0ms)
Example: Set Intercharacter Delay to 8ms
Step1: Scan Set Intercharacter Delay
Step2: Scan “0” “0” “8” in Appendix – Numbers
Step3: Scan Set Intercharacter Delay
Interblock Delay
The configurable range is from 0 to 2550ms. The larger the number, the longer the delay.
Set Interblock Delay
(Default = 0ms)
Example: Set Interblock Delay to 20ms
Step1: Scan Set Interblock Delay
Step2: Scan “0” “0” “2” in Appendix – Numbers
Step3: Scan Set Interblock Delay