Marson MT582W User manual

MT582W User’s Manual V1.0
___________________________________________________________________________________
1
MT582W
2D Ring Scanner
User’s Manual
Version 1.0 DATE: 2023/02/01

MT582W User’s Manual V1.0
___________________________________________________________________________________
2
Table of Content
1. Introduction .................................................................................................... 12
1.1 Manual Description .................................................................................................... 12
1.2 Product Requirements............................................................................................... 12
1.3 Specifications.............................................................................................................. 13
1.4 Beeper Indication ....................................................................................................... 14
1.5 LED Indication ............................................................................................................ 15
1.6 Barcode Configurability ............................................................................................. 16
1.7 Factory Default ........................................................................................................... 16
1.8 Custom Default........................................................................................................... 16
1.9 Check Version ............................................................................................................ 17
2. Interface .......................................................................................................... 18
2.1 USB HID ...................................................................................................................... 18
2.1.1 Intercharacter Delay ........................................................................................... 18
2.1.2 Polling Rate ......................................................................................................... 19
2.1.3 Keyboard Layout................................................................................................. 20
2.1.4 Alt Code................................................................................................................ 22
2.1.5 Control Mode ....................................................................................................... 23
2.1.6 Capslock Mode.................................................................................................... 24
2.1.7 End of Data Symbol............................................................................................ 24
2.1.8 GS Replacement................................................................................................. 24
2.1.9 CRLF Replacement ............................................................................................ 25
2.2 USB VCP..................................................................................................................... 26
2.3 HID POS...................................................................................................................... 26
3. Reading Mode................................................................................................. 27
3.1 Batch Mode................................................................................................................. 27

MT582W User’s Manual V1.0
___________________________________________________________________________________
3
3.2 Trigger Mode............................................................................................................... 27
3.2.1 Trigger Condition ................................................................................................ 27
3.2.2 LED Timeout........................................................................................................ 28
3.2.3 Sleep Mode.......................................................................................................... 28
3.2.4 Sleep Timeout ..................................................................................................... 28
3.2.5 Identical Read Interval ....................................................................................... 29
3.3 Auto-sensing Mode.................................................................................................... 30
3.3.1 LED Timeout........................................................................................................ 30
3.3.2 Identical Read Interval ....................................................................................... 31
3.3.3 Image Stabilization Timeout.............................................................................. 32
3.3.4 Auto-sensing Sensitivity..................................................................................... 32
3.3.5 Stop Mode............................................................................................................ 33
3.4 Continuous Mode ....................................................................................................... 33
3.4.1 LED Timeout........................................................................................................ 34
3.4.2 Scan Interval........................................................................................................ 34
3.4.3 Identical Read Interval ....................................................................................... 35
4. Illumination and Aimer................................................................................... 37
4.1 Illumination .................................................................................................................. 37
4.2 Aimer............................................................................................................................ 37
5. Indicator.......................................................................................................... 39
5.1 General Settings......................................................................................................... 39
5.2 Power Up Beep .......................................................................................................... 39
5.3 Good Read Beep ....................................................................................................... 39
5.3.1 Indicator Beep Type ........................................................................................... 40
5.3.2 Beep Volume....................................................................................................... 40
5.4 Configuration Barcode Beep .................................................................................... 40

MT582W User’s Manual V1.0
___________________________________________________________________________________
4
5.5 Good Read LED and Duration ................................................................................. 41
5.6 Good Read LED Mode.............................................................................................. 41
5.7 Not Good Read (NGR) Message............................................................................. 42
6. Data Format .................................................................................................... 43
6.1 General Settings......................................................................................................... 43
6.2 Data Length................................................................................................................. 43
6.3 STX (0x02) .................................................................................................................. 44
6.4 Preamble + Code ID .................................................................................................. 44
6.5 Preamble ..................................................................................................................... 44
6.5.1 Enable/Disable Preamble.................................................................................. 44
6.5.2 Set Preamble....................................................................................................... 45
6.5.3 Set Preamble of a Symbology .......................................................................... 45
6.5.4 Clear Preamble ................................................................................................... 46
6.6 Code ID........................................................................................................................ 46
6.6.1 Enable/Disable/Reset Code ID......................................................................... 46
6.6.2 Set Code ID ......................................................................................................... 46
6.7 Postamble ................................................................................................................... 49
6.7.1 Enable/Disable Postamble ................................................................................ 49
6.7.2 Set Postamble ..................................................................................................... 49
6.7.3 Set Postamble of a Symbology........................................................................ 50
6.7.4 Clear Postamble.................................................................................................. 51
6.8 Terminator................................................................................................................... 51
6.8.1 Enable/Disable Terminator................................................................................ 51
6.8.2 Set Terminator..................................................................................................... 51
6.8.3 Quick Terminator Options.................................................................................. 52
6.9 Data Editing................................................................................................................. 52

MT582W User’s Manual V1.0
___________________________________________________________________________________
5
6.9.1 Data Output ......................................................................................................... 52
6.9.2 Set Data Length .................................................................................................. 53
6.9.3 Hide Start/Center/End........................................................................................ 53
6.9.4 Set Data Length of a Symbology...................................................................... 54
6.9.5 Clear Data Length............................................................................................... 56
6.10 Encoding Format...................................................................................................... 56
6.10.1 Input Encoding Format .................................................................................... 56
6.10.2 Output Encoding Format ................................................................................. 57
6.11 ECI Mode .................................................................................................................. 57
6.12 QR Code with URL .................................................................................................. 58
7. Symbologies................................................................................................... 59
7.1 General Settings......................................................................................................... 59
7.1.1 All Symbologies................................................................................................... 59
7.1.2 1D Symbologies.................................................................................................. 59
7.1.3 2D Symbologies.................................................................................................. 59
7.2 Surround GS1 Application Identifiers (AI’s) with Parentheses............................ 59
7.3 Inverse Barcode ......................................................................................................... 60
7.3.1 All Inverse Barcode ............................................................................................ 60
7.3.2 1D Inverse Barcode............................................................................................ 60
7.3.3 2D Inverse Barcode............................................................................................ 60
7.4 Code128 ...................................................................................................................... 62
7.4.1 Reset to Default .................................................................................................. 62
7.4.2 Enable/Disable Code128................................................................................... 62
7.4.3 Min/Max Length................................................................................................... 62
7.5 EAN-8........................................................................................................................... 63
7.5.1 Reset to Default .................................................................................................. 63

MT582W User’s Manual V1.0
___________________________________________________________________________________
6
7.5.2 Enable/Disable EAN-8 ....................................................................................... 63
7.5.3 Check Digit........................................................................................................... 64
7.5.4 Supplement.......................................................................................................... 64
7.5.5 Supplement Required ........................................................................................ 64
7.5.6 EAN-8 Expand to EAN-13 ................................................................................. 65
7.6 EAN-13 ........................................................................................................................ 65
7.6.1 Reset to Default .................................................................................................. 65
7.6.2 Enable/Disable EAN-13 ..................................................................................... 65
7.6.3 Check Digit........................................................................................................... 65
7.6.4 Supplement.......................................................................................................... 66
7.6.5 Supplement Required ........................................................................................ 66
7.6.6 EAN-13 Convert to ISBN................................................................................... 66
7.6.7 EAN-13 Convert to ISSN ................................................................................... 67
7.7 UPC-E0........................................................................................................................ 67
7.7.1 Reset to Default .................................................................................................. 67
7.7.2 Enable/Disable UPC-E0 .................................................................................... 67
7.7.3 Check Digit........................................................................................................... 67
7.7.4 System Number .................................................................................................. 68
7.7.5 Supplement.......................................................................................................... 68
7.7.6 Supplement Required ........................................................................................ 68
7.7.7 UPC-E0 Expand to UPC-A................................................................................ 69
7.8 UPC-E1........................................................................................................................ 69
7.8.1 Reset to Default .................................................................................................. 69
7.8.2 Enable/Disable UPC-E1 .................................................................................... 69
7.8.3 Check Digit........................................................................................................... 69
7.8.4 System Number .................................................................................................. 70

MT582W User’s Manual V1.0
___________________________________________________________________________________
7
7.8.5 Supplement.......................................................................................................... 70
7.8.6 Supplement Required ........................................................................................ 70
7.8.7 UPC-E1 Expand to UPC-A................................................................................ 71
7.9 UPC-A.......................................................................................................................... 71
7.9.1 Reset to Default .................................................................................................. 71
7.9.2 Enable/Disable UPC-A....................................................................................... 71
7.9.3 UPC-A Expand to EAN-13 ................................................................................ 71
7.9.4 Check Digit........................................................................................................... 72
7.9.5 System Number .................................................................................................. 72
7.9.6 Supplement.......................................................................................................... 72
7.9.7 Supplement Required ........................................................................................ 73
7.10 Interleaved 2/5.......................................................................................................... 73
7.10.1 Reset to Default ................................................................................................ 73
7.10.2 Enable/Disable Interleaved 2/5 ...................................................................... 73
7.10.3 Min/Max Length ................................................................................................ 73
7.10.4 Verification......................................................................................................... 74
7.11 Matrix 2/5................................................................................................................... 75
7.11.1 Reset to Default ................................................................................................ 75
7.11.2 Enable/Disable Matrix 2/5 ............................................................................... 75
7.11.3 Min/Max Length ................................................................................................ 75
7.11.4 Verification......................................................................................................... 76
7.12 Industrial 2/5 ............................................................................................................. 76
7.12.1 Reset to Default ................................................................................................ 76
7.12.2 Enable/Disable Industrial 2/5 .......................................................................... 77
7.12.3 Min/Max Length ................................................................................................ 77
7.12.4 Verification......................................................................................................... 78

MT582W User’s Manual V1.0
___________________________________________________________________________________
8
7.13 IATA 2/5..................................................................................................................... 78
7.13.1 Reset to Default ................................................................................................ 78
7.13.2 Enable/Disable IATA 2/5 ................................................................................. 78
7.13.3 Min/Max Length ................................................................................................ 79
7.13.4 Verification......................................................................................................... 79
7.14 Code39 ...................................................................................................................... 80
7.14.1 Reset to Default ................................................................................................ 80
7.14.2 Enable/Disable Code39................................................................................... 80
7.14.3 Send Start & Stop............................................................................................. 80
7.14.4 Min/Max Length ................................................................................................ 80
7.14.5 Verification......................................................................................................... 81
7.14.6 Enable/Disable Code32................................................................................... 81
7.14.7 Code32 Preamble............................................................................................. 82
7.14.8 Code32 Check Digit ......................................................................................... 82
7.14.9 Full ASCII Code39............................................................................................ 82
7.15 Codabar..................................................................................................................... 82
7.15.1 Reset to Default ................................................................................................ 82
7.15.2 Enable/Disable Codabar.................................................................................. 83
7.15.3 Min/Max Length ................................................................................................ 83
7.15.4 Verification......................................................................................................... 84
7.15.5 Send Start & Stop............................................................................................. 84
7.16 Code93 ...................................................................................................................... 85
7.16.1 Reset to Default ................................................................................................ 85
7.16.2 Enable/Disable Code93................................................................................... 85
7.16.3 Min/Max Length ................................................................................................ 85
7.17 Code11 ...................................................................................................................... 86

MT582W User’s Manual V1.0
___________________________________________________________________________________
9
7.17.1 Reset to Default ................................................................................................ 86
7.17.2 Enable/Disable Code11................................................................................... 86
7.17.3 Min/Max Length ................................................................................................ 87
7.17.4 Verification......................................................................................................... 87
7.18 MSI Plessey.............................................................................................................. 88
7.18.1 Reset to Default ................................................................................................ 88
7.18.2 Enable/Disable MSI Plessey........................................................................... 88
7.18.3 Min/Max Length ................................................................................................ 89
7.18.4 Verification......................................................................................................... 89
7.19 GS1 DataBar ............................................................................................................ 90
7.20 GS1 DataBar Limited .............................................................................................. 90
7.21 GS1 DataBar Expanded ......................................................................................... 91
7.22 Plessey ...................................................................................................................... 91
7.22.1 Reset to Default ................................................................................................ 91
7.22.2 Enable/Disable Plessey................................................................................... 91
7.22.3 Min/Max Length ................................................................................................ 92
7.22.4 Check Digit ........................................................................................................ 92
7.23 Febraban................................................................................................................... 92
7.23.1 Enable/Disable ITF25 Febraban .................................................................... 92
7.23.2 Enable/Disable Code128 Febraban .............................................................. 93
7.23.3 Verification......................................................................................................... 93
7.24 Composite................................................................................................................. 93
7.25 PDF417 ..................................................................................................................... 93
7.26 QR Code ................................................................................................................... 94
7.27 Micro QR Code......................................................................................................... 94
7.28 Data Matrix................................................................................................................ 94

MT582W User’s Manual V1.0
___________________________________________________________________________________
10
7.29 MicroPDF417............................................................................................................ 94
7.30 Aztec .......................................................................................................................... 95
7.31 MaxiCode .................................................................................................................. 95
7.32 HanXin....................................................................................................................... 95
7.33 DotCode .................................................................................................................... 95
8. Configuration Barcode .................................................................................. 97
8.1 Data 0~F...................................................................................................................... 97
8.2 Save & Abort............................................................................................................... 98
Appendix................................................................................................................ 99
Appendix A - Default Table ............................................................................................. 99
Appendix B - Code ID .................................................................................................... 106
Appendix C - ASCII Table ............................................................................................. 108
Appendix D - Configuration Method............................................................................. 112
LED Timeout................................................................................................................ 112
Sleep Timeout ............................................................................................................. 112
Image Stabilization Timeout...................................................................................... 112
Identical Read Interval ............................................................................................... 112
Auto-sensing Threshold............................................................................................. 112
Scan Interval................................................................................................................ 113
Preamble/Postamble.................................................................................................. 113
Terminator.................................................................................................................... 113
Code ID ........................................................................................................................ 113
NGR (Not Good Read) Message ............................................................................. 113
Min/Max Length........................................................................................................... 114
Intercharacter Delay ................................................................................................... 114
Good Read LED Duration.......................................................................................... 114

MT582W User’s Manual V1.0
___________________________________________________________________________________
11
Appendix E – Control Code Table................................................................................ 115
Appendix F – Symbology Index Table......................................................................... 116
Version History.................................................................................................... 118

MT582W User’s Manual V1.0
___________________________________________________________________________________
12
1. Introduction
1.1 Manual Description
A wearable scanner weighing at 14g, MT582W 2D Wearable Ring Scanner is
the most lightweight in the world. When paired with the mobile platform,
MT582W provides hands-free freedom to the user who needs to perform
multi-tasks while always on the move. Drawing very little power from the host
device, the MT582W wearable scanner ensures that the connected mobile
terminal can operate for a full shift with a single charge.
1.2 Product Requirements
Model
Firmware Version
Interface
MT582W V2.4.1.56.17 or later
version
USB HID
USB VCP
HID POS
Function Button
(Button Preference config)
Exit Window
Velcro Strap
Touch-Activated
Trigger Button
LED Indicator
USB Type-C Connector
(with Protective Cover)

MT582W User’s Manual V1.0
___________________________________________________________________________________
13
1.3 Specifications
Optic & Performance
Light Source White LED
Visible red LED
Sensor
640 x 480
Resolution 3mil/ 0.075mm
Scan Angle Horizontal 43°
Vertical 23°
Pitch Angle ±55°
Skew Angle ±55°
Roll Angle 360°
Print Contrast Ratio 10%
Width of Field 176mm (13Mil Code39)
Memory 2MB (20,000 barcodes)
Typical D.O.F
(Environment: 800 lux)
5 Mil Code 39 : 42 ~ 204mm
13 Mil UPC/EAN : 45 ~ 350mm
15 Mil QR Code : 28 ~ 246mm
6.67 Mil PDF417 : 46 ~ 152mm
10 Mil Data Matrix: 37 ~ 150mm
Physical Characteristics
Dimension W27.6 x L46.2 x H26.8 mm
Weight 14g
Color Black
Material PC+ABS
Cable Type C(M) to Type C(M) Cable, 1.5M
Trigger Touch Switches (Trigger Buttons)
Function Button
Indicator LED, Buzzer
Electrical
Operation Voltage 5.0 VDC ± 5%
Working Current
< 200mA
Standby Current < 15mA
Connectivity

MT582W User’s Manual V1.0
___________________________________________________________________________________
14
Interface/ Profile
USB HID
USB VCP
User Environment
Operating Temperature -20 ~ 60˚C
Storage Temperature -40 ~ 70˚C
Humidity 0% ~ 95%RH (Non-condensing)
Drop Durability 1.5M
Sealing IP42
Ambient Light 100,000 Lux (Sunlight)
1D Symbologies
Code 128, EAN-13, EAN8-, UPC-E, UPC-A,
ISBN, ISSN, Code 11, Interleaved 2 of 5,
Code 39, Code 93, Code 32, Codabar,
Matrix 2 of 5, Industrial 2 of 5, Standard 2 of
5, Plessey, MSI Plessey, GS1 Databar,
Febraban, Composite
2D Symbologies
QR Code. Micro QR Code, PDF417,
MicroPDF417, Data Matrix, Aztec,
MaxiCode, HanXin, Dotcode
Regulatory
ESD Functional after 4KV contact, 8KV air
discharge
EMC/RF TBA
Safety Approval
TBA
Environmental WEEE, RoHS 2.0
1.4 Beeper Indication
Beeper Status
Single beep Good read
Two beeps Error
Three beeps The scanner successfully reads a
configuration barcode
Four beeps Power Up

MT582W User’s Manual V1.0
___________________________________________________________________________________
15
1.5 LED Indication
During scanning operation (pressing touch-activated buttons):
During button preference configuration (pressing function button):
LED Status
Green Good read
LED Status
Red
Enable Left Button Only (Right-handed User)
Blue Enable Right Button Only (Left-handed User)
Purple Enable Both Button

MT582W User’s Manual V1.0
___________________________________________________________________________________
16
1.6 Barcode Configurability
Scanning below configuration barcodes will allow/prohibit user to change
settings by scanning configuration barcodes in this manual.
Enable Barcode Configurability* Disable Barcode Configurability
Scanning below configuration barcodes will allow/prohibit configuration
barcode data output.
Enable Config Barcode Data Output Disable Config Barcode Data Output*
1.7 Factory Default
Scanning below configuration barcode will reset all parameters to factory
default settings (the ones with *asterisk mark)
Factory Default
1.8 Custom Default
You can create your own custom default. Scan Save Custom Default
configuration barcode below and all the current settings of MT582W will be
saved to your custom default, overwriting, if any, the previous one. Scan
Custom Default to reset MT582W to the custom default settings.

MT582W User’s Manual V1.0
___________________________________________________________________________________
17
Save Custom Default Custom Default
1.9 Check Version
To check firmware version, please scan below configuration barcode.
Check Version

MT582W User’s Manual V1.0
___________________________________________________________________________________
18
2. Interface
MT582W provides UART serial interface and multiple USB interfaces to
communicate with the host. Through communication interface, it is possible to
receive barcode data and send command to control MT582W at the same
time.
2.1 USB HID
Scanning below configuration barcode will set MT582W to USB HID interface,
in which MT582W becomes an HID keyboard device.
USB HID*
2.1.1 Intercharacter Delay
Intercharacter delay is the time interval between the release of last key and the
pressing of the next key. The configurable range is from 0 to 75ms; default is
2ms. Please refer to Appendix D for configuration method of Set
Intercharacter Delay.
2ms* 0ms
5ms 10ms

MT582W User’s Manual V1.0
___________________________________________________________________________________
19
Set Intercharacter Delay
2.1.2 Polling Rate
The smaller the value, the faster MT582W sends characters to the host. If the
host loses characters, please increase polling rate.
1ms* 2ms
3ms 4ms
5ms 6ms
7ms 8ms
9ms 10ms

MT582W User’s Manual V1.0
___________________________________________________________________________________
20
2.1.3 Keyboard Layout
English (USA)* French
Italian German
Spanish Turkish Q
English (UK) Belgian
Portuguese (Portugal) Portuguese (Brazil)
Hungarian Turkish F