Maruyama MS0835W User manual
MS0835W EN (1 - 7 Page)
Owner's Manual
ESP (8 - 14 Página)
Manual del usuario
FRA (15 - 21 Page)
Manuel d'utilisation
ITA (22 - 28 Pagina)
Manuale dell'operatore
DEU (29 - 35 Seite)
Bedienungsanleitung
NL (36 - 42 Pagina)
Handleiding voor de eigenaar/
gebruiker
Completely read and understand this manual before using this product.
Lea y entienda este manual a fondo, antes de usar este aparato.
Lire et assimiler la totalité de ce manuel avant d'utiliser cet appareil.
Leggere completamente e assimilare il manuale prima di utilizzare il prodotto.
Bitte lesen Sie VOR Inbetriebnahme des Geräts diese Anleitung sorgfältig durch.
Lees en begrijp deze handleiding volledig voordat u dit product gebruikt.
Original
Traducido
Traduit
Tradotto
Übersetzt
Vertaald
FOREWORD ................................................................. 1 Oil feeding and mixing ................................................... 4
WARNING .................................................................... 1 Operating Instructions ................................................... 5
Name of each part......................................................... 2 Maintenance................................................................. 6
................................................................ 3 Storage........................................................................ 6
Before operation ........................................................... 4 Trouble-shooting and actions .......................................... 7
and to assist you with the assembly, operation and maintenance of your new product.
It is essential that any operator of this product reads and understands the contents of this manual before using the product.
Failure to comply with the instructions in this manual may result in serious injury or death.
For additional assistance, contact any local authorized Maruyama dealer.
General
product.
/ Operator's Manual.
warning of trouble.
been damaged is prohibited.
Safety
wearing of suitable protective clothing, a breathing mask, safety glasses and rubber gloves is therefore imperative.
children.
treated than necessary.
of strong alkali nature, paint, and thinner.
revolving speed) according to the Owner's/Operator's manual.
Back-pack type Power Sprayer with pump
Back-pack type Power Sprayer with pump means a powered machine appropriate to spray chemicals for blight or harmful insect on
farm house, garden trees, general farm crops.
The machinery may be subject to national requirements for regular inspection by designated bodies, as provided for in
Directive 2009/128/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for
Community action to achieve the sustainable use of pesticides.
TABLE OF CONTENTS
FOREWORD
WARNING
1
If accessories are missing or damaged, inform the sales outlet where you purchased the product.
Conrmation of standard parts
Name of each part
Warning label
Name of each part 2
Owner's ManualWide nozzleBall cockNozzle pipeSpraying hose assembly
Nozzle
1
1
2
2
Drain
Ball cock
Throttle lever
Stop switch
Starter knob
Fuel tank
15L
Nominal
Volume
Read operation manual thoroughly.
Make sure you read the operation manual
thoroughly prior to use.
Cautions for high temperatures
Muffler of engine, fin of cylinder, etc. are at high
temperatures. Don't touch them.
Wear personal protective equipment
Wear protectors such as hat, safety glasses, ear
plugs during work.
Cautions for exhaust gas
Take care not to breathe in exhaust gas from the
engine.
Prohibition of re
Don't put a naked flame close to a place where
supplying fuel or doing maintenance.
Caution for avoiding to be injury the nger
Don't hold under the chemical tank. Need to hold up
side position of the chemical tank.
Caution for electrical shock
There is danger of electric shock during operation,
so do not touch the spark plug.
Wear respiratory protection
Wear respiratory prorection such as a mask during work.
Wear appropriate protective clothing
Wear proper and protective work clothes.
Keep bystanders away when spraying
During operation, do not allow any unauthorized
person to approach the spraying site.
xxxx
3Specication
Models MS0835W
L × W × H(mm) 398 × 425 × 635
Weight(kg) Empty mass 8.5 (Full mass 34.3)
Nominal volume 15 (Maximum volume 25)
Fuel tank capacity(L) 0.8
Strainer mesh size 32 meshes
Nozzle spray amount(L/min / Mpa) 1.3 / 1.0 , 1.82 / 2.0 , 2.24 / 3.0
NOIZE Sound power level, measured, dB (A) 102
Vibration 5.0 m/s2 (Measured the handle)
Pump
Type Maruyama twin piston
Maximum pressure(MPa) 3.5
Suction(L/min) 8.0
-1) 1930
Engine
Model Maruyama EE262
Type
Displacement(mL) 26
Engin speed (min-1) 7000
Rated continuous output(kw/min-1) 0.85/7500
Fuel
Ignition system Electronic Ignition
Spark plug
Stating system Recoil Starter
THE DISPLAY OF THE PESTICIDE CHEMICAL
Holder
Holder The operation
manual of
agricultural pesticide
chemicals, or a name
display
Opening
45°
45°
Before operation
Oil feeding and mixing
DANGER
CAUTION
4
1. Tighten the knapsack strap
Pull the strap downward.
2. Loosen the knapsack strap
Lift strap buckle upward to
loosen.
3.Pull the chest strap to tighten.
vertical.
vertical.
There is a possibility of fuel igniting. Make sure you observe the
following items.
the engine after it is dry.
done.
the supply tank.
and follow the mixing method and cautions for use.
close the cover securely. Otherwise, chemicals will spill and
you might be covered with them when you carry the machine
on your back.
Nozzle holder is provided in the top
of chemical tank
Assembly of nozzle
Oil feeding
Attachment and removal of a strainer The adjustment of strap
Mixing chemicals
Wide nozzle
Rib Rib
Strainer Strainer
Nozzle pipe
Discharge port
End of spraying hose
Ball cock Grip Spraying hose assembly
Gasoline ：
Exclusive oil
50 ： 1
1
1 1
2
3
3
3
2
2
5Operating instructions
CAUTION
CAUTION
CAUTION
Without water or chemicals in the tank, the pump will break down. Never run the pump dry.
Perform priming.Push priming
pump installed in front of the
carburetor several times slowly,
and confirm that fuel fills the
priming pump and returns to the
tank through the clear return line.
Turn the handle of the pressure control valve until there is
position).
After confirming proper pump and spray operation in the
machine, move the throttle lever to high-speed position.
When opening ball cock, chemicals will be sprayed from
nozzle in a mist.
Push stop button to stop engine.
When setting the pressure control valve handle to
"HIGH PRESSURE" position of pressure control valve handle,
engine revolutions increase as pressure decreases. When
position, use at a position little bit back from full open
throttle.
STARTING
When engine is started and when pump starts suction.
HERBICIDE
When engine is started and when pump starts suction.
killer, etc.)
INSECTICIDE
Normal spraying work
HIGH PRESSURE
hose than standard is used.
Return throttle lever to low speed.
Engine will start.
After pulling starting rope gently by two or three times,
pull it hard to start the engine.
Return choke slowly.
If the engine does not start by repeated action, try
pulling the rope after fully opening the choke.
If the engine still does not start, refer to page 7.
[Pulling method for starting rope]
1.Grasp starting rope tight with right hand.
2.Hold chemical tank with left hand.
3.Pull starting rope slowly until resistance is felt.
4.Pull starting rope straight from entrance of starter.
5.Do not pull starting rope to the end.
6.Do not release the starter rope handle when rope
is extended. Allow the recoil to rewind the rope
gradually.
Set handle of pressure control valve
at "STARTING" position.
Fully close the choke. (In hot
weather or when engine is hot,
the choke should be partly open
or fully open.)
Move throttle lever to medium-
and low-speed position.
STARTING
HIGH
PRESSURE
Throttle lever
Throttle lever
Stop button
Push
4
5
6
Operation Stop
1 3
6
Maintenance
Storage
CAUTION
CAUTION
CAUTION
Cleaning, maintenance and draining
For cleaning, check and maintenance, always be sure to stop machine.
Don't leave chemicals in the chemical tank and pump. This might cause the machine to break down.
Disassembly
Check and maintenance items for each season
Pump
Drain
Cleaning of air cleaner
to remove dirt and prevent clogging.
remove excess fuel.
worn one with new one.
Make sure to drain, otherwise the pump might be damaged by
freezing in winter.
from the nozzle to clean the pump and inside of the hose.
throttle lever position, which is a little bit back from full open
position.
stop button.
Remove fuel from fuel tank, and operate the machine in
idling state until it stops.
Move throttle lever to low-speed position.
Set pressure control valve handle to "STARTING". After finishing the above, put the machine in a box and
store it at a place free from moisture and which is well
ventilated.
Cleaning ignition plug
1
3
2
2 4
Element
Hose contacting
screw
Drain cap
Gasoline
0.6~0.7mm
Remove
carbon
hard
Dip in the
blended fuel
consumable goods.
7Trouble-shooting and actions
Pump
Symptom Treatment
No suction
(1)Loose connecting of suction hose
(2)Suction hose clogged with chemicals
(3)Wear to piston packing
(4)Foreign matter in valve portion
(2)Disassemble and clean
(3)Replace with new parts
(4)Disassemble and clean
Pressure cannot be increased.
(poor spraying state)
(1)Wear to piston packing
(2)Scratch on the inside surface of cylinder
(3)Scratch on delivery valve
(4)Wear to pressure control valve seat
(5)Foreign material on each valve
(6)Wear to cam handle
(7)Wear to nozzle hole
(8)Too high a nozzle number used
(1)Replace with new one.
(2)Replace with new one.
(3)Replace with new one.
(4)Replace with new one.
(5)Disassemble and clean.
(6)Replace with new one.
(7)Replace with new one.
(8)Decrease number of nozzles or replace
with smaller diameter nozzle.
Engine
Symptom Treatment
Does not start
Excessive vibration Loose part Tighten
Excessive noise Tighten
General
adecuado del soplador.
accesorios.
8
.................................................................. 8 ...................................... 11
.............................................................. 8 Instrucciones de uso..................................................... 12
..................... 9 Mantenimiento............................................................. 13
.............................................................. 10 Almacenamiento .......................................................... 13
Antes de utilizar el aparato............................................ 11 ............................... 14
para ayudarle con el armado, el uso y el mantenimiento de su nuevo soplador de mochila.
El no observar las instrucciones de este manual, puede producir lesiones graves o incluso la muerte.
Seguridad
de las necesarias.
diluyentes.
indica el manual de uso.
PULVERIZADOR MOTORIZADO DE MOCHILA
La máquina puede estar sujeta a requisitos nacionales de inspección ordinaria por parte de organismos designados, según
lo previsto en la Directiva 2009/128/CE del Parlamento Europeo y del Consejo de 21 de octubre de 2009 que establece un
marco comunitario de actuación para lograr el uso sostenible de pesticidas.
INDICE
PREFACIO
ADVERTENCIA
Etiqueta de advertencia
9
Vericación de las partes estándar
Nombre y función de cada una de las partes
Nombre y función de cada una de las partes
Manual de usoBoquilla anchaLlave de pasoTubo de la boquilla
Conjunto de manguera del pulverizador
1
1
2
2
Drenaje
Llave de paso
Palanca del
acelerado
el pecho
mochila
Interruptor de apagado
Perilla de encendido
15L
Nominal
Volume
Lea detenidamente el manual del usuario
usuario antes de operar la unidad.
Precauciones con las piezas calientes
El silenciador del motor, las aletas de cilindro, y otras piezas
Use elementos de protección
Precauciones con el gas de escape
Tenga cuidado de no respirar el gas de escape del
motor de la unidad.
Prevención de incendios
Nunca maneje combustible o haga mantenimiento
de la unidad cerca de un fuego abierto.
Precaución para evitar lastimarse los dedos
lados.
Precaución a tener en cuenta para evitar descargas eléctricas
Use protección respiratoria
trabajo.
Use ropa protectora adecuada
Use ropa de trabajo adecuada y protectora.
Mantener alejados a los transeúntes al rociar
xxxx
Especicación
Modelos MS0835W
Longitud × Ancho × Altura(mm) 398 × 425 × 635
Peso(kg)
Volumen nominal 15L (Volumen maximo 25L)
0.8
Filtro de malla 32 mallas
1.3/1.0 , 1.82/2.0 , 2.24/3.0
El ruido Nivel de potencia sonora, medido, dB (A) 102
Nivel de potencia sonora, garantizado, LWAG, dB (A) 103
5.0 m/s2 (Medido el mango)
Bomba
Tipo Maruyama dos cilindros
3.5
8.0
-1) 1930
Motor
Modelo Maruyama EE262
Tipo De 2 tiempos con enfriamiento de aire forzado.
Desplazamiento(mL) 26
La velocidad del motor(min-1) 7000
-1) 0.85/7500
Sistema de encendido Arrancador de retroceso
PRESENTACIÓN DEL PESTICIDA QUÍMICO
Soporte
Soporte Manual de uso del
del nombre
Abertura
10
45°
45°
Antes de utilizar el aparato
Carga de combustible y mezcla
PELIGRO
PRECAUCIÓN
1. Ajuste la correa.
Jale de la correa hacia abajo
3.Jale de la correa del pecho para adjustar
vertical.
una vez reparado.
sobre su uso.
usted resulte salpicado si transporta la mochila sobre su espalda.
encuentra en la parte superior del
Conjunto de la boquilla
Carga de combustible
Fijación y retirada de un colador. El ajuste de la correa.
Mezcla de productos químicos
Descarga
Extremo de la
manguera rociadora
suministro de
combustible
Llave de paso Mango
Gasolina ：
Aceite de uso exclusivo
50 ： 1
11
PRECAUCIÓN
PRECAUCIÓN
1
1 1
2
3
3
3
2
2
Instrucciones de uso
Nunca haga funcionar la bomba en seco.
presione varias veces la bomba de
combustible llene esta bomba y
STARTING
HERBICIDE
(Rociado de plaguicidas, etc.)
INSECTICIDE
Para trabajos normales de rociado.
HIGH PRESSURE
El motor se pondrá en marcha.
veces, jale con fuerza para poner el motor en marcha.
Lentamente, cierre el estrangulador.
Si de todas maneras el motor no arranca, consulte la página 14.
[Método para jalar la cuerda de arranque]
1.
2.
3.
4.
retroceso recoja la cuerda de manera gradual.
"STARTING".
cuando el motor está caliente, el
estrangulador debe permanecer
parcial o totalmente abierto.)
MLleve la palanca del acelerador
baja.
STARTING
HIGH
PRESSURE
Palanca del
acelerador
Presione
4
5
6
Funcionamiento Apagado
PRECAUCIÓN
12
PRECAUCIÓN
PRECAUCIÓN
13
Mantenimiento
Almacenamiento
Limpieza, mantenimiento y drenaje
Desarmar
Limpiar
Estrujar
Elementos a vericar y a los que se les debe
realizar mantenimiento cada temporada.
Bomba
Drenaje
Limpieza del ltro de aire
estrujarlo hasta eliminar el exceso de combustible.
velocidad.
en su caja y guárdela en un lugar libre de humedad y bien
ventilado.
Limpieza de la bujía de encendido
electrodos.
1
3
2
24
Elementos
Gasolina
0.6~0.7mm
Elimine el
Estrujar
bien
Sumergir en
la mezcla de
combustible
13
PRECAUCIÓN
Resolución de problemas y acciones
Bomba
Tratamiento
(1)
(2)
(3)
(4)
(1)Ajustar de manera adecuada.
(2)Desarmar y limpiar.
(3)Reemplazar con nuevas piezas.
(4)Desarmar y limpiar.
No es posible aumentar la
(baja capacidad de rociado)
(1)
(2)
(4)
(6)Desgaste en la manija de la leva.
(7)
(1)Sustituir por nuevas piezas.
(2)Sustituir por nuevas piezas.
(3)Sustituir por nuevas piezas.
(4)Sustituir por nuevas piezas.
(5)Desarmar y limpiar.
(6)Sustituir por nuevas piezas.
(7)Sustituir por nuevas piezas.
(8)
reemplazar por una de menor diámetro.
Motor
Tratamiento
No se pone en
funcionamiento
Reemplazar o realizar un servicio de la bobina/volante del motor.
Ajuste inadecuado del cable del acelerador.
silenciador.
Pieza suelta. Ajustar
Aumento del ruido del motor
El silenciador y la tapa del silenciador están sueltos.
Ajustar
14
AVANT PROPOS .......................................................... 15 ................................ 18
AVERTISSEMENT.......................................................... 15 Instructions d'utilisation ................................................ 19
Nomenclature des pièces............................................... 16 Entretien..................................................................... 20
........................................... 17 Stockage..................................................................... 20
Avant d'utiliser l'appareil ............................................... 18 .................................................................. 21
Général
Sécurité
et des diluants.
PULVÉRISATEUR Á DOS MOTORISÉ
L’ équipement est soumis aux procédures nationales d’ inspection régulière par les instances compétentes, en conformité
avec la Directive 2009/128/CE du Parlement Européen et du Conseil du 21 octobre 2009 établissant un cadre pour l’ action
communautaire en vue de consolider l’ utilisation durable des pesticides.
TABLE DES MATIÈRES
AVANT PROPOS
AVERTISSEMENT
15
Étiquettes d’ avertissement
Contrôle des pièces fournies
Nomenclature des pièces
Nomenclature des pièces 16
Mode d’ emploi
Buse à diffusion
large
Robinet à otteurCorps de lanceEnsemble du tuyau de pulvérisation
Buse
1
1
2
2
Drain
Manette de
Lanière ventrale
Lanières de
port au dos
15L
Nominal
Volume
Lisez intégralement le mode d’ emploi
Attention aux températures élevées
Portez des vêtements protecteurs
Attention aux gaz d’ échappement
moteur.
Attention au feu
Danger de blessure aux mains
Attention aux décharges électriques
Porter une protection respiratoire
le travail.
Portez des vêtements de protection appropriés
Tenir les personnes à distance lors de la pulvérisation
Pendant le fonctionnement, ne laissez aucune
xxxx
17 Caractéristiques techniques
Des modèles MS0835W
Longueur × Largeur × Hauteur(mm) 398 × 425 × 635
Poids(kg) Masse vide 8.5 (Pleine masse 34.3)
Volume nominal 15L (Volume maximum 25L)
0.8
Passoire maillage 32 meshes
1.3/1.0 , 1.82/2.0 , 2.24/3.0
Le bruit
Niveau de puissance de bruit, garanti, LWAG, dB (A) 103
Vibrations 5.0 m/s2
Pompe
Type
Pression maximale(MPa) 3.5
Aspiration(L/min) 8.0
-1) 1930
Moteur
Modèle Maruyama EE262
Type
26
La vitesse du moteur(min-1) 7000
Puissance nominale en continu(kw/min-1) 0.85/7500
Allumage
Bougie
INFORMATIONS SUR LE PESTICIDE CHIMIQUE
Pochette
Pochette
des pesticides
usage agricole ou
nom du pesticide.
Ouverture
45°
45°
Avant d'utiliser l'appareil
Lubrication et produit à pulvériser
DANGER
AVERTISSEMENT
18
renverser du carburant sur le
1. Pour resserrer la lanière
Tirez vers le bas sur la
lanière
2. Pour desserrer la lanière
Soulevez la boucle pour
desserrer la lanière
3.Tirez sur cette lanière pour la resserrer
ou verticalement.
suivantes.
dilution et les avertissements correspondants.
refermez-le en serrant bien. Dans le cas contraire, le produit
Supports de fixation de la lance
Montage de la lance
Lubrication
Fixation et retrait d'une crépine Réglage des lanières
Mélange et remplissage du produit chimique
Passoire Passoire
Serrez bien
Ensemble du tuyau
Essence ：
Huile deux temps
50 ： 1
AVERTISSEMENT
AVERTISSEMENT
PRECAUCIÓN
1
1 1
2
3
3
3
2
2
19 Instructions d’ utilisation
Amorcez la machine. Pour cela,
appuyez plusieurs fois sur la
transparente de retour.
STARTING
HERBICIDE
INSECTICIDE
HIGH PRESSURE
deux ou trois fois sur la corde de
[Utilisation de la corde de démarrage]
1.
gauche.
ressort la rembobiner progressivement.
Placez la molette du robinet de
"STARTING".
Fermez entièrement le starter.
de la machine est chaud, ouvrez
starter.)
moteur en position de moyen ou
STARTING
HIGH
PRESSURE
Manette de
Appuyez
4
5
6
Utilisation Arrêt
Other manuals for MS0835W
1
Table of contents
Languages:
Other Maruyama Paint Sprayer manuals
Maruyama
Maruyama MS0741 User manual
Maruyama
Maruyama M200 User manual
Maruyama
Maruyama MS050 Owner's manual
Maruyama
Maruyama MS0835W User manual
Maruyama
Maruyama MS332 User manual
Maruyama
Maruyama MS074 User manual
Maruyama
Maruyama BSA-500-1 User manual
Maruyama
Maruyama MSD41 User manual
Maruyama
Maruyama BSM201 User manual
Maruyama
Maruyama MS072H Owner's manual
Maruyama
Maruyama BSA-950LM User manual
Maruyama
Maruyama MD181DX User manual
Maruyama
Maruyama MS0735W (CE) User manual
Maruyama
Maruyama MS0735W (CE) Owner's manual
Maruyama
Maruyama MX402 User manual
Maruyama
Maruyama MS331 User manual
Maruyama
Maruyama MX403 User manual
Maruyama
Maruyama M409 User manual
Maruyama
Maruyama MS317 User manual
Maruyama
Maruyama MS315 User manual
