Masimo Opioid Halo User manual

HALO
1
2
HALO
SET UP APP & CONNECT HOME MEDICAL HUB
Masimo HALO
SYSTEM COMPONENTS
Masimo Halo App
- Displays monitoring status.
- Cloud sends alerts to Home Medical
Hub and mobile device.
- Compatible with most mobile devices.
(Mobile device not included.)
Home Medical Hub
- Collects data from Masimo Sensor.
- Sends data to smartphone app.
- Store the chip in the holder on top
of Home Medical Hub.
Replacement Tapes
- Additional tapes for replacement
as needed.
Masimo Chip
- Reusable chip snaps into the sensor and
communicates with the Home Medical Hub.
Masimo Sensor
- Disposable sensor provides the monitoring
data and lasts up to 96 hours in typical
continuous usage.
- Sensor may be removed when not in use.
Be sure to remove chip between use to
preserve battery life.
2. Connect Home Medical Hub
to power.
1. Download the app and create
an account.
3. Pair Home Medical Hub with phone
(Smartphone Bluetooth should be ON).
4. Connect Home Medical Hub to Wifi*.
Follow step-by-step instructions on
app to set up system.
Chip Holder
*Only compatible with 2.4 GHz wireless networks.
OPIOID OVERDOSE PREVENTION
AND ALERT SYSTEM*
© 2023 Masimo. All rights reserved. 304426/11958A-0323
Quick Start Guide
Opioid Halo™Opioid Halo™Opioid Halo™Opioid Halo™Opioid Halo™Opioid Halo™Opioid Halo™Opioid Halo™Opioid Halo™
SET UP SENSOR
1. Remove sensor from pouch. 2. Peel off yellow label to
activate battery.
3. Place sensor on wrist as shown and
carefully thread the tip of the strap through
the open red loop.
4. Wrap the loose end of the
strap around your wrist and
press to secure.

3
4
5 6
Listen for click
to confirm
chip placement
Look for light to
confirm chip
connection to sensor
APPLY SENSOR
PAIR AND INSERT CHIP
CONFIRM PAIRING
Once the chip is inserted, the Home
Medical Hub Bluetooth Status LED
will turn off and the Status LED will
turn green. The chip light indicator
will turn solid blue.
1. Add Emergency Contacts from
your contact list or add manually.
2. Enable emergency dispatch
services or choose to opt out.
3. View live data. Green display
indicates monitoring has started.
2. Insert the chip into open
compartment on the sensor.
1. Hold the chip near the
Home Medical Hub and
listen for double beep.
3. Press down on the
chip to secure.
3. Squeeze top and bottom
of finger to secure tape.
4. Remove plastic film
and continue to wrap
tape around finger.
5. Adjust cable to
comfortable length.
2. Wrap tape around finger so
black square ( ) is on finger pad
directly across from star ( ).
1. Remove part of the plastic film
and place star ( ) on top of
fingernail of ring finger.
Visit www.masimo.com/support or scan the QR code to:
• see full list of supported devices,
• purchase additional sensors,
• view other resources, including videos and instructions.
*Opioid Halo continuously monitors certain physiological
parameters that are indicative of opioid-induced respiratory
depression – a sign of opioid overdose – in order to alert
users and their emergency contacts so that action can be
taken to avoid adverse consequences of an overdose.
SET UP NOTIFICATIONS
CHANGING THE REPLACEMENT TAPE
3. Attach sensor to finger.2. Attach new tape in same
direction as used tape.
1. Remove used tape
from sensor.
4. Peel the remaining tape
off backing.