MasterChef E500 User manual

E500 Barbecue
Assembly Manual
85-3044-6 (G45311) Propane
85-3045-4 (G45312) Natural Gas
1 YEAR LIMITED WARRANTY
Manual Revision #: 12022013 PD
TM
MC
ANS Z21.58b-2012-CSA 1.6b-2012
ANS Z21.58b-2012-CSA 1.6b-2012 ANS Z21.58b-2012-CSA 1.6b-2012
ANS Z21.58b-2012-CSA 1.6b-2012
READ AND SAVE MANUAL FOR FUTURE REFERENCE.
Assemble your grill immediately.
Missing or damaged parts claims must be submitted within 30 days of purchase date.
For product inquiries, parts, warranty and troubleshooting support,
please call 1-855-453-2150.

DANGER
1. If you smell Gas:
a. Shut o gas to the appliance
b. Extinguish any open ame
c. Open lid
d. If odor continues, keep away from
the appliance and immediately
call your gas supplier or your
re department
2. Requires two people to complete the
assembly process.
3. Beware of sharp edges.
WARNING
Failure to follow all of the Manufacturer’s
instructions could result in hazardous res,
explosions, property damage, or serious
personal injury or even death.
Follow all leak check procedures carefully
prior to operation of barbecue, even if grill
was dealer assembled. Do not try to light
this barbecue without reading the Lighting
Instructions section of this manual.
THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMES
CAUTION
Read and follow all safety statements,
assembly instructions, use and care
directions before attempting to assemble
and cook.
WARNING
1. Do not store or use gasoline or other
ammable liquids or vapours in the
vicinity of this or any other appliance.
2. An LP cylinder not connected for use shall
not be stored in the vicinity of this or any
other appliance.
WARNING
IN DIRECT SUN, AND IN OPERATION,
YOUR BBQ’S STAINLESS STEEL AND
PAINTED STEEL PARTS CAN BECOME
VERY HOT.
CAUTION
Sharp edges. Wear gloves when assembling
your grill.
THIS BARBECUE IS FOR OUTDOOR USE ONLY
CONTACT CALL CENTRE IF ANY PARTS ARE MISSING
1-855-453-2150
INSTALLER OR ASSEMBLER/CONSUMER
This manual should be kept with the BBQ at
all times.
HEAVY ARTICLE NEEDS 2 TO LIFT
To ORDER non-warranty replacement parts or accessories, or to register your warranty,
please visit us on the web at
www.masterchefbbqs.com

1
HARDWARE PACK
KEY # DESCRIPTION PART NUMBER QUANTITY
1 ¼”-20UNCX38 Screw 20120-13038-250 8
2 ¼”-20UNCX18 Screw 20120-13018-250 8
3 ¼”-20UNCX13 Screw 20120-13013-250 6
4 ¼” Nut 30220-13000-250 4
5 φ7 Lock Washer 41400-07000-250 18
6 φ7 Washer 40300-07000-250 22
7 NO.10-24UNCX10 Screw 20124-10010-250 10
8 φ5 Lock Washer 41400-05000-250 4
9 φ5 Washer 40300-05000-250 7
10 NO.10-24UNCX35 Screw 20124-10035-250 1
11 NO.8-32UNCX10 Screw 20132-08010-250 4
12 φ4 Lock Washer 41400-04000-250 4
13 φ4 Washer 40300-04000-250 4
14 NO.8-32UNC Nut 30232-08000-250 4
15 ST4.2X10 Tapping Screw 22500-42010-137 7
16 Fiber washer G501-0054-9100 4
17 Control knob G453-0049-9000 2
18 Castor Pin G350-0026-9000 1
19 Electrode set spacer, Side burner G453-0065-9000 1
20 Venturi clip, Side burner G405-0019-9200 1
TOOLS NEEDED FOR ASSEMBLY
• #2 Phillips screwdriver (long and short)
• ¼” Slotted screwdriver (long and short)
• Adjustable wrench
• Pliers
For correct hardware assembly, always position
the lock washer between the screw and the at
washer.
Lock Washer
Flat Washer
Screw
Control knob
X 2
Venturi Clip
X 1
Fiber Washer
X 4
Electrode Spacer
X 1
ST4.2X10 Tapping Screw
X 7
φ5 Lock Washer
X 4
φ5 Washer
X 7
NO.10-24UNCx10 Screw
X 10
NO.10-24UNCx35 Screw
X 1
Caution:
Sheet metal can cause injury. Wear gloves when installing the grill.
¼”-20UNCx18 Screw
X 8
φ7 Washer
X 22
φ7 Lock Washer
X 18
φ4 Washer
X 4
φ4 Lock Washer
X 4
NO.8-32UNC Nut
X 4
Castor Pin
X 1
123
4 5 6
9
12
15
18
7
10
13
16
8
11
14
17
19 20
¼”-20UNCx38 Screw
X 8
¼” Nut
X 4
NO.8-32UNCX10 Screw
X 4
¼”-20UNCx13 Screw
X 6
BEFORE ASSEMBLING THIS BARBECUE, READ THE INSTRUCTIONS CAREFULLY.
Assemble the barbecue on a flat, clean surface. Grill is heavy. Two people are recommended
to complete assembly.

2
PARTS LIST PROPANE FOR 8530446 G45311
KEY # QUANTITY DESCRIPTION PART NO.
AA 1 Top lid G453-5100-01
AB 1 Lid handle G513-0004-01
AC 1 Thermometer G432-R200-01
AD 2 Screw for top lid G453-0025-01
AE 2 Lid bumper, front G508-0063-01
AF 2 Lid bumper, rear G508-0033-01
BA 1 Burner box weldment G453-2200-01
BB 2 Flame tamer brace G453-0004-01
BC 4 Main burner G517-7300-01
BD 3 Carryover assembly G614-0095-01
BE 4 Flame tamer G453-0020-01
BF 2 Cooking grate G453-0019-01
BG 1 Warming rack G453-0018-01
BH 1 Upper back panel G453-0010-01
BI 1 Match holder G501-0068-01
BJ 1 Rotisserie burner G453-2500-01
BK 1 Wind shield, rotisserie G501-00B1-01
BL 1 Rotisserie burner collector box G453-0034-01
BM 1 Rotisserie burner, electrode set G453-0033-01
BN 1 Rotisserie burner valve G453-0032-01
CA 1 Manifold assembly-LP G453-2400-01
CB 1 Regulator G606-0008-01
CC 1 IR Side burner valve-LP G453-0007-01
CD 2 Side burner metal hose G608-0039-01
CE1 1 Rotisserie exible hose G601-0055-A1
CE2 1 Rotisserie LP orice G601-0055-03
CF 4 Control knob G453-0049-01
CG 4 Bezel, control knob G501-0031-01
CH1 1 Electronic igniter assembly G651-1300-01
CH2 1 Electronic ignition button G409-0030-01
CI 1 Electrode set, main burner G515-0067-01
CJ 1 Control panel G453-0050-01
CK 1 Heat shield G453-0011-01
CL 1 Grease tray G350-4400-01
CM 1 Right track G453-0013-01
CN 1 Left track G453-0012-01
DA 1 Side burner shelf table - Left G453-7400-01
DB 1 Side burner shelf fascia - Left G453-0026-01
DC 1 Infrared support frame G453-0063-01
DD 1 Infrared side burner G453-9300-01
DE 1 Electrode set, infrared G453-5800-01
DF1 1 Infrared burner lid G453-0057-01
DF2 1 Infrared burner lid handle G401-0031-01
DG 1 Infrared burner cooking grate G453-0060-01
DH 1 Side shelf table - Right G453-0700-01
DI 1 Side shelf fascia - Right G453-0039-01
DJ 2 Infrared grease tray rail G453-0064-01
DK 1 Infrared grease tray G453-0059-01
EA 1 Door support rail G453-5000-01
EB 1 Cart side panel - Left G453-0300-01
EC 1 Cart side panel - Right G453-0400-01
ED 1 Bottom shelf-LP G453-0500-02
EE 2 Locking castor G350-0023-01
EF 2 Castor G350-0024-01
EG 1 Left door assembly G453-6900-01
EH 1 Right door assembly G453-7200-01
EI 2 Door handle G453-0053-01
EJ 2 Magnet assembly G501-0016-01
F1 1 Hardware pack G453-B011-01
F2 1 Assembly instructions G453-M011-01
F3 1 Safe use and care manual G453-M006-02
F4 1 Tank screw G505-0047-01
F5 1 Bottom shelf weight G412-0030-01

HARDWARE
PACK
F1
F2 F3
ASSEMBLY
MANUAL
SAFETY
AND CARE
MANUAL
3
EXPLODED DIAGRAM PROPANE FOR 8530446 G45311
AA
AB
AC
AE
AF
AD
BG
BF
BE
BB
BD
BC
DF1
BA
DG DF2
DB
DJ
DA
DC
DD
EB
ED
F5
CL
CK
EA
CN
BI
CM
DI
CH2
CH1
DH
CB
CE2
CI
BM BK
BL
BJ
CE1
EC
EE
EF
EJ
DK
EG
F4
BH
CJ
CD
CC
CA
CD
BN
DE
CG
CF
EH
EI EI

4
PARTS LIST NATURAL GAS FOR 8530454 G45312
KEY # QUANTITY DESCRIPTION PART NO.
AA 1 Top lid G453-5100-01
AB 1 Lid handle G513-0004-01
AC 1 Thermometer G432-R200-01
AD 2 Screw for top lid G453-0025-01
AE 2 Lid bumper, front G508-0063-01
AF 2 Lid bumper, rear G508-0033-01
BA 1 Burner box weldment G453-2200-01
BB 2 Flame tamer brace G453-0004-01
BC 4 Main burner G517-7300-01
BD 3 Carryover assembly G614-0095-01
BE 4 Flame tamer G453-0020-01
BF 2 Cooking grate G453-0019-01
BG 1 Warming rack G453-0018-01
BH 1 Upper back panel G453-0010-01
BI 1 Match holder G501-0068-01
BJ 1 Rotisserie burner G453-2500-01
BK 1 Wind shield, rotisserie G501-00B1-01
BL 1 Rotisserie burner collector box G453-0034-01
BM 1 Rotisserie burner, electrode set G453-0033-01
BN 1 Rotisserie burner valve G453-0041-01
CA 1 Manifold assembly-NG G453-2700-01
CB 1 Natural Gas hose G501-0099-01
CC 1 IR Side burner valve-NG G453-0024-01
CD 2 Side burner metal hose G608-0039-01
CE1 1 Rotisserie exible hose G601-0055-A1
CE2 1 Rotisserie LP orice G601-0055-04
CF 4 Control knob G453-0049-01
CG 4 Bezel, control knob G501-0031-01
CH1 1 Electronic igniter assembly G651-1300-01
CH2 1 Electronic ignition button G409-0030-01
CI 1 Electrode set, main burner G515-0067-01
CJ 1 Control panel G453-0050-01
CK 1 Heat shield G453-0011-01
CL 1 Grease tray G350-4400-01
CM 1 Right track G453-0013-01
CN 1 Left track G453-0012-01
DA 1 Side burner shelf table - Left G453-7400-01
DB 1 Side burner shelf fascia - Left G453-0026-01
DC 1 Infrared support frame G453-0063-01
DD 1 Infrared side burner G453-9300-01
DE 1 Electrode set, infrared G453-5800-01
DF1 1 Infrared burner lid G453-0057-01
DF2 1 Infrared burner lid handle G401-0031-01
DG 1 Infrared burner cooking grate G453-0060-01
DH 1 Side shelf table - Right G453-0700-01
DI 1 Side shelf fascia - Right G453-0039-01
DJ 2 Infrared grease tray rail G453-0064-01
DK 1 Infrared grease tray G453-0059-01
EA 1 Door support rail G453-5000-01
EB 1 Cart side panel - Left G453-0300-01
EC 1 Cart side panel - Right G453-0400-01
ED 1 Bottom shelf-NG G453-1000-02
EE 2 Locking castor G350-0023-01
EF 2 Castor G350-0024-01
EG 1 Left door assembly G453-6900-01
EH 1 Right door assembly G453-7200-01
EI 2 Door handle G453-0053-01
EJ 2 Magnet assembly G501-0016-01
F1 1 Hardware pack G453-B011-01
F2 1 Assembly instructions G453-M011-01
F3 1 Safe use and care manual G453-M006-02
F4 1 Bottom shelf weight G412-0030-01

DC
DF2
5
BM
EXPLODED DIAGRAM NATURAL GAS FOR 8530454 G45312
HARDWARE
PACK
F1
F2 F3
ASSEMBLY
MANUAL
SAFETY
AND CARE
MANUAL
AA
AB
AC
AE
AF
AD
BG
BF
BE
BB
BD
BC
DF1
BA
DG
DB
DJ
DA
DD
EB
ED
CL
CK
EA
CN
BI
CM
DI
CH2
CH1
DH
CE2
CB
CI
BK BL
BJ
CE1
EC
EE
EF EJ
DK
EG
BH
CJ CD
CC
CA
CD
BN
DE
CG
CF
EH
EI EI

6
1
ASSEMBLY INSTRUCTIONS
18
Upside down view
Close Up
Close Up
Front view
Ensure that the Locking Castors (EE) are rmly
locked in the “ON” position before continuing.
Assemble the Left Side Panel (EB) and the Right
Side Panel (EC), to the Bottom Shelf (ED).
2
YOU WILL NEED:
YOU WILL NEED:
3
18
5 6
X 6
X 1
X 6 X 6
EC
EC
EB
ED
ED
ED
EF
EE
A
EE
EF
Separate the 2 dierent types of castors: 2
Locking Castors (EE) and 2 Regular Castors (EF).
Note: Regular Castors (EF) need to be
assembled to the front of the Bottom Shelf
(ED), and Locking Castors (EE) need to be
assembled to the back of the Bottom Shelf
(ED), as shown in image A.
Attach the Regular Castor (EF) to the front of the
Bottom Shelf (ED), and use the Pin Tool (#18) to
secure and tighten.
Repeat for remaining 3 castors (EE & EF).
Back
Front

7
3
4
ASSEMBLY INSTRUCTIONS
Front View
THIS STEP REQUIRES 3 PEOPLE. DO NOT
ATTEMPT ALONE. EXTREMELY HEAVY!
Position the Top Lid Assembly and Burner Box
Assembly (A & B) onto the Cart Assembly (C), as
shown.
A
C
B
+
Back View
Close Up
BH
EB
EC
EC
Attach the Upper Back Panel (BH) to both the
Left And Right Side Panels (EB & EC).
Attention: Assembly of the Upper Back Panel
(BH) will be completed in Step 8 and 11.
876
YOU WILL NEED:
1
X 2
6
X 2
5
X 2

8
5Assemble the Door Support Rail (EA) to the Left
and Right Upper Side Panels (EB and EC), as
shown.
WARNING: This part may have sharp edges.
Wear protective gloves when assembling.
ASSEMBLY INSTRUCTIONS
YOU WILL NEED:
1 5 6
X 4 X 4 X 4
Close Up
Front View
EB
EA
EA
EB
EC

9
ASSEMBLY INSTRUCTIONS
Left side view
7
7
6
6
YOU WILL NEED:
YOU WILL NEED:
15
11
X 1
X 4
9
12 13 14
X 1
X 4 X 4 X 4
EB
EA
BA
Attach the Match Holder (BI) to the left side panel
of the Burner Box Assembly.
BI
6
b. Attach the infrared burner lid (DF1) to the left
side burner shelf table (DA).
a. Assemble infrared grease tray rails (DJ) to the
infrared support frame (DC) located on the left
sear stove side shelf (DA) as shown in gure A.
7
DA
DF1
A
B
B2
B2
A1
A1
A1 B2
DC
DJ
DA
YOU WILL NEED:
7
X 4

10
ASSEMBLY INSTRUCTIONS
8LEFT SIDE SHELF ASSEMBLY
a. Mount the left side burner side shelf (DA and
DB) onto the two support brackets, located
on the left, upper side panel of the burner box
(BA).
b. Assemble the left side burner side shelf
(DA and DB) to the upper side panel of the
burner box (BA), by positioning hardware
through the interior of the burner box (BA),
as shown in gure B.
YOU WILL NEED:
BA
BA
DB
DB
DA
DA
B
A
Back, left side view
Front, left side view
DB
CJ
C
Left side view
View inside burner box
YOU WILL NEED:
B2
B2
A1
A1
YOU WILL NEED:
1 5 6
X 1 X 1 X 1
c. Assemble the front of the left side burner side
shelf assembly (DA and DB) to the control
panel (CJ), as shown in gure C.
d. Complete the left side burner side shelf
assembly (DA and DB) by connecting the side
shelf, the rear of the Burner Box side panel
(BA), and the Upper Back Panel (BH), as shown
in gure D.
216
X 2 X 2
A1
4
X 2
B2
6
X 2
2 5 6 15 9
X 2 X 2 X 2 X 1 X 1
C1 D1
C1
D1
C1
DA
BA
BH
D

11
a. Remove the hardware that is pre-assembled
to the IR side burner valve (CC), as shown in
gure A.
Insert the side burner valve stem (CC) through
the rear of the left side shelf fascia (DB) and
assemble using the hardware removed.
b. Assemble the Side burner control knob (#17)
to the Side burner valve (CC).
ASSEMBLY INSTRUCTIONS
9
CC
CD
A
B
CC
DB
DB
17 17
X 1
YOU WILL NEED:

12
ASSEMBLY INSTRUCTIONS
10
DC
DB
a. Position the electrode spacer (#19) on the
infrared support frame (DC) and then feed
the infrared burner electrode (DE) through
the opening on the right side of the infrared
support frame (DC). Assemble using hardware
as shown in gure A.
NOTE: the infrared electrode (DE) set can be
found attached to the infrared side burner valve
(CC).
YOU WILL NEED:
10 19
X 1 X 1
A
B
C
b. To complete assembly of the infrared side
burner (DD), align the brackets of the infrared
side burner (DD) to the brackets located on the
infrared grease tray rails (DJ) as shown in gure
B and C. Assemble using hardware.
IMPORTANT: Make sure that the infrared side
burner (DD) engages the sear stove burner
valve (CC) before tightening hardware
(gure D).
YOU WILL NEED:
7
X 2
DD
DJ
DD
View from underneath left side shelf
D
View from underneath left side shelf
View from above, left side shelf
View from underneath left side shelf
19
DA
DE
DJ
DD
DB

13
ASSEMBLY INSTRUCTIONS
10
e. Position the infrared grease tray (DK) onto the
infrared grease tray rails (DJ).
c. Use the side burner Venturi clip (#20) to
connect the infrared side burner (DD) to the
side burner valve (CC).
d. Position the side burner cooking grate (DG)
onto the infrared support frame (DC).
YOU WILL NEED:
20
X 1
F
G
DG
DC
E
20
View from underneath left side shelf
View from the back, left side
DD
DK
DJ
CC

14
ASSEMBLY INSTRUCTIONS
11
BA
DI
DH
RIGHT SIDE SHELF ASSEMBLY
TIP: Do not tighten until all hardware is in place.
a. Mount the right side shelf (DH and DI ) onto
the two support brackets, located on the right,
upper side panel of the burner box (BA).
b. Assemble the right side shelf (DH and DI) to
the upper side panel of the burner box (BA), by
positioning hardware through the interior of
the burner box, as shown in gure B.
c. Assemble the front of the right side shelf
(DH and DI) to the control panel (CJ), as shown
in gure C.
A
DH
DI
BA
DI
CJ
DH
B
C
View, under right side shelf
Back, right side view
A1
B2
A1
B2
D1
C1
C1
YOU WILL NEED:
YOU WILL NEED:
YOU WILL NEED:
1 5 6
X 1 X 1 X 1
216
X 2 X 2
A1
4
X 2
B2
6
X 2
2 5 6 15 9
X 2 X 2 X 2 X 1 X 1
C1 D1
DH
BA
BH
DI
D
d. Complete the right side burner side shelf
assembly (DI and DH) by connecting the side
shelf, the rear of the Burner Box side panel (BA),
and the Upper Back Panel (BH), as shown in
gure D.
Front, right side view
View inside burner box

15
ASSEMBLY INSTRUCTIONS
12
View, under right side shelf
View, under right side shelf
View, under right side shelf
View, under right side shelf
ELECTRONIC IGNITION ASSEMBLY
a. Remove the electronic ignition button (CH2)
and the plastic nut from the Electronic Igniter
Assembly (CH1)
b. Position the Electronic Igniter Assembly (CH1)
through the opening in the Right Side Shelf
Fascia (DI) and secure using the plastic nut.
c. Insert one “AA” battery into the battery
compartment (CH1) with the positive end
facing outward, as shown. Secure using the
electronic ignition button (CH2).
* Battery not included.
Note: All wire connectors are the same.
d. Insert the Electrode Sets, for the Main Burner
(CI), the infrared side burner (DE), and the
rotisserie burner (BM), into the Electronic
Igniter Assembly (CH1). (Figure B, C and D)
Ensure that the wire is pushed in rmly.
DI
CH1
CH1
CH1
Battery
CH1
CI
DE
BM
CH2
A
B
C
D
Plastic Nut
+-

16
ASSEMBLY INSTRUCTIONS
13
DI
DI
17
A
B
14
EA
EA
CK
CK
Assemble the Heat Shield (CK) to the bottom of
the Door Support Rail (EA) and the Upper back
panel (BH), as shown in gure A and B.
YOU WILL NEED:
15
X 2
Front view
Close up
A
YOU WILL NEED:
17
X 1
a. Remove the hardware that is pre-assembled
to the Rotisserie Burner Valve (BN), as shown in
gure A
Assemble the Rotisserie Burner Valve (BN)
to the Right Side Shelf Fascia (DI), using the
hardware removed.
b. Assemble the Side Burner Control Knob (#17)
to the Rotisserie Burner Valve (BN).
BN

17
14
ASSEMBLY INSTRUCTIONS
CN CM
EA
EB EC
a. Assemble the Left and Right Tracks (CN and
CM) for the Grease Tray (CL), as shown in gure
A.
YOU WILL NEED:
15
X 2
15
Front view
CK
BH
BH
CK
Back view
Close up
B
A
CM
CN
BH
Close up, back view Close up, front view
CM
CN

18
ASSEMBLY INSTRUCTIONS
16 Assemble the Door Handle (EI) to the Left and
Right Door Assembly (EG and EH).
Left door handle
Right door handle
YOU WILL NEED:
YOU WILL NEED:
7
7
8
8
9
9
X 2
X 2
X 2
X 2
X 2
X 2
EI
EH
15
CL
BH
b. Insert the Grease Tray (CL) into the opening of
the Upper Back Panel (BH).
Back view