MasterChef G32012 User manual

PRIME 3-BURNER
PROPANE BARBECUE
Assembly Manual
85-3135-0 / G32012
1 YEAR LIMITED WARRANTY
ANSI Z21.58-2015 / CSA 1.6-2015
ANSI Z21.58-2015 / CSA 1.6-2015 ANSI Z21.58-2015 / CSA 1.6-2015
ANSI Z21.58-2015 / CSA 1.6-2015
READ AND SAVE MANUAL FOR FUTURE REFERENCE.
Assemble your grill immediately.
Missing or damaged parts claims must be submitted within 30 days of purchase date.
For product inquiries, parts, warranty and troubleshooting support,
please call 1-855-453-2150.
Manual Revision #: 02212019 JC

DANGER
1. If you smell Gas:
a. Shut o gas to the appliance.
b. Extinguish any open ame.
c. Open lid.
d. If odor continues, keep away from
the appliance and immediately
call your gas supplier or your
re department.
2. Requires two people to complete the
assembly process.
3. Beware of sharp edges.
WARNING
Failure to follow all of the Manufacturer’s
instructions could result in hazardous res,
explosions, property damage, serious
personal injury or even death.
Follow all leak check procedures carefully
prior to operation of barbecue, even if grill
was dealer assembled. Do not try to light
this barbecue without reading the Lighting
Instructions section of this manual.
THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMES
CAUTION
Read and follow all safety statements,
assembly instructions, use and care
directions before attempting to assemble
and cook.
WARNING
1. Do not store or use gasoline or other
ammable liquids or vapours in the
vicinity of this or any other appliance.
2. An LP cylinder not connected for use shall
not be stored in the vicinity of this or any
other appliance.
WARNING
IN DIRECT SUNLIGHT, AND IN
OPERATION, YOUR BBQ’S STAINLESS
STEEL AND PAINTED STEEL PARTS CAN
BECOME VERY HOT.
CAUTION
Sharp edges. Wear gloves when assembling
your grill.
THIS BARBECUE IS FOR OUTDOOR USE ONLY.
CONTACT CALL CENTRE IF ANY PARTS ARE MISSING.
1-855-453-2150
INSTALLER OR ASSEMBLER/CONSUMER
This manual should be kept with the BBQ at
all times.
HEAVY ARTICLE NEEDS 2 TO LIFT
To ORDER non-warranty replacement parts or accessories, or to register your warranty,
please visit us on the web at
www.masterchefbbqs.com

3
HARDWARE PACK
1/4’’ - 20 UNC x 50 Screw
X 2
1/4’’ - 20 UNC x 20 Screw
X 16
ST4.2 x 8 Tapping Screw
X 5
No. 10 - 24 UNC Nut
X 1
Wheel Spacer
X 2
Stopper, Lid Hinge
X 2
1/4’’ - 20 UNC x 30 Screw
X 2
No. 10 - 24 UNC x 13 Screw
X 30
1/4’’ - 20 UNC Nut
X 10
Aluminum Washer
X 17
Hitch Pin, Wheel
X 1
Top Lid Spacer
X 2
No. 8 - 32 UNC x 10 Screw
X 6
Hitch Pin, Burner
X 3
Wheel Washer
X 1
Clip, Regulator
X 1
1 3
4
7
10
13
16
5
8
11
14
6
9
12
15
KEY # DESCRIPTION PART NUMBER QUANTITY
1 1/4’’ - 20 UNC x 50 Screw 20120-13050-036 2
2 1/4’’ - 20 UNC x 30 Screw 20120-13030-036 2
3 1/4’’ - 20 UNC x 20 Screw 20120-13020-036 16
4 No.10 - 24 UNC x 13 Screw 20124-10013-036 30
5 No. 8 - 32 UNC x 10 Screw 20132-08010-250 6
6 ST4.2 x 8 Tapping Screw 24200-42008-136 5
7 1/4’’ - 20 UNC Nut 31220-13000-036 10
8 No.10 - 24 UNC Nut 31224-10000-036 1
9 Aluminum Washer G466-0042-9000 17
10 Hitch Pin, Burner G515-0013-9000 3
11 Wheel Spacer G312-0014-9088 2
12 Hitch Pin, Wheel G306-0005-9088 1
13 Wheel Washer 40300-08000-036 1
14 Stopper, Lid Hinge G320-3004-9191 2
15 Top Lid Spacer G305-0024-9088 2
16 Clip, Regulator G351-0043-9000 1
TOOLS NEEDED FOR ASSEMBLY
• #2 Star-head screwdriver (long and short)
• ¼” Slotted screwdriver (long and short)
• Adjustable wrench
• Pliers
For correct hardware assembly, always position
the lock washer between the screw and the at
washer.
Caution:
Sheet metal can cause injury. Wear gloves when installing the grill.
Lock Washer
Flat Washer
Screw
BEFORE ASSEMBLING THIS BARBECUE, READ THE INSTRUCTIONS CAREFULLY.
Assemble the barbecue on a flat, clean surface. The grill is heavy, two people are
recommended to complete assembly.
2

4
PARTS LIST (PROPANE) FOR 85-3135-0 / G32012
KEY # QUANTITY DESCRIPTION PART NO.
AA 1 Top Lid Assembly G320-6501-01
AB 1 Top Lid Handle G320-6301-01
AC 1 Lid Handle Heat Shield G320-5104-01
AD 2 Lid Hinge G320-5101-01
AE 2 Lid Handle Washer G560-0002-01
AF 2 Lid Handle Screw and Washer G432-U300-01
BA 1 Burner Box Assembly G320-5400-01
BB 3 Main Burner G320-0200-01
BC 1 Electrode Set, Main Burner G312-B103-01
BD 2 Carryover Assembly G413-0004-02
BE 3 Flame Tamer G215-0203-01
BF 1 Cooking Grate G305-0006-01
BG 1 Warming Rack G320-6401-01
CA 1 Control Panel G320-6000-01
CB 1 Manifold Assembly G320-6100-01
CC 1 Regulator G311-0503-01
CD 3 Control Knob G320-5302-01
CE 1 Ignitor G206-0701-01
CF 1 Grease Cup Hook G305-0043-01
CG 1 Grease Cup G430-0033-02
CH 1 Gas Tank Heat Shield G320-3003-01
DA 1 Top Cart Leg, Left G320-5601-01
DB 1 Front Cart Leg, Left ------------2 G320-5602-01
DC 1 Rear Cart Leg, Left -------------1 G320-5603-01
DD 1 Top Cart Leg, Right G320-5701-01
DE 1 Front Cart Leg, Right ---------- 4 G320-5702-02
DF 1 Rear Cart Leg, Right -----------3 G320-5703-02
DG 2 Lower Cart Brace G312-B503-01
DH 1 Upper Back Brace G320-5800-01
DI 1 Lower Back Brace G320-5900-02
DJ 1 Front Panel G320-5501-01
DK 2 End Caps G320-5504-01
DL 2 Wheel G206-0025-01
DM 1 Wheel Axle G320-5507-01
DN 1 Match Holder G401-0079-01
DO 1 Tank Exclusion Wire G320-6601-01
DP 1 Gas Tank Support G320-5503-01
DQ 1 Tank Exclusion Wire, Right G215-3803-01
EA 2 Side Shelf G215-1800-01
F1 1 Hardware Pack G320-B008-01
F2 1 Assembly Instructions G320-M012-01
F3 1 Safe Use and Care Manual G320-M012-02

5
EXPLODED DIAGRAM (PROPANE) FOR 85-3135-0 / G32012
AA
AB
AC
AD
AE
AF
BA
DP
DH
DI
EA
DB
(2)
DJ
CB
DG
BC
DN
CC
CE
CH
DO
CA
BD
BB
EA
BE
BF
BG
CD
CF
CG
DA
DD
DC
(1)
DE
(4)
DG
DK
DL
DM
DF
(3)
3
3
4
4
1
12
2
DQ
HARDWARE
PACK
F1
F2 F3
ASSEMBLY
MANUAL
SAFETY
AND CARE
MANUAL

6
1
ASSEMBLY INSTRUCTIONS
DG
YOU WILL NEED:
4
X 2
YOU WILL NEED:
766
2
X 1
7
X 1
YOU WILL NEED:
7
6
1
X 1
7
X 1
DC
(1)
DA
(1)
DA
(2)
DC
(1)
DB
(2)
DB
(2)
DG

7
YOU WILL NEED:
766
2
X 1
7
X 1
YOU WILL NEED:
7
6
1
X 1
7
X 1
2
ASSEMBLY INSTRUCTIONS
DE
(4)
DD
(4)
DE
(4)
DF
(3)
DD
(3)
DF
(3)
DG
DG
DQ
YOU WILL NEED:
4
X 2

8
ASSEMBLY INSTRUCTIONS
3
YOU WILL NEED:
4
X 6
DJ
DA
DD
DQ

9
ASSEMBLY INSTRUCTIONS
4
YOU WILL NEED:
4
X 8
DH
DH
DI
DD
DQ
DA
DD
DA

10
ASSEMBLY INSTRUCTIONS
5
DM
12
12
11
13
DL
13
11
DL 11
DK
YOU WILL NEED:
YOU WILL NEED:
76
6
11
11
X 1
X 1
12 13
X 1 X 1

11
ASSEMBLY INSTRUCTIONS
6
DI
DO
DQ
DJ
YOU WILL NEED:
6
X 1

12
ASSEMBLY INSTRUCTIONS
7
BA
BA
A
B
YOU WILL NEED:
4
X 4
7
9
X 4

13
ASSEMBLY INSTRUCTIONS
8
YOU WILL NEED:
10
X 3
BB
10
BA
BB
BB
BC
10
B
Assemble burner with
electrode in the middle.
A
YOU WILL NEED:
6
X 3
BB
BD
BD

14
ASSEMBLY INSTRUCTIONS
9
YOU WILL NEED:
4
X 2
CH
BA
A
B
YOU WILL NEED:
4
X 1
77 98
X 1X 1
CH
8
BA 8
9
4

15
ASSEMBLY INSTRUCTIONS
10
CE
CE
CA
A

16
ASSEMBLY INSTRUCTIONS
10
CA
CA
CB
CB
YOU WILL NEED:
5
X 6
B

17
BC
CE
ASSEMBLY INSTRUCTIONS
11
A
B
BC
CE
Attach the main burner
electrode wire (BC) to
the ignitor (CE). Make sure
that the electrode wire (BC)
is pushed in rmly.
CA
BA
BB
BB
CB
Position Valves (CB) into Burner
Tubes (BB) before assembling.
YOU WILL NEED:
76
4
X 4
9
X 4
ATTENTION: YOU WILL NEED TWO PEOPLE FOR THIS STEP.
IMPORTANT:
Position regulator
(CC) on the inside of
the cart.
CC
CC

18
ASSEMBLY INSTRUCTIONS
12
CD
CB
CA

19
ASSEMBLY INSTRUCTIONS
13
BA
BA
YOU WILL NEED:
YOU WILL NEED:
3
3
X 2
X 2
TIGHTEN SCREW
HALFWAY, A S SHOWN
TIGHTEN SCREW
HALFWAY, A S SHOWN
A

20
ASSEMBLY INSTRUCTIONS
13
YOU WILL NEED:
YOU WILL NEED:
3
3
X 2
X 2
EA
EA
EA
EA
BA
BA
BA
BA
B
D
E
C
TIGHTEN ALL SCREWS
TIGHTEN ALL SCREWS