Matco Tools MWL700 User manual

Page 1
PRODUCT INFORMATION:
INTENDED USE OF THE TOOL
WARNING
WARNING
DO NOT DISCARD – GIVE TO USER
The manufacturer warrants this product to the original user
against defective material or workmanship for a period of 1
year from the date of purchase.
The manufacturer reserves the right to determine whether
the part or parts failed because of defective material,
workmanship or other causes. Failures caused by accident,
alteration, or misuse are not covered by this warranty.
The manufacturer, at its discretion, will repair or replace
product covered under this warranty free of charge. Repairs
or replacements of products covered under this warranty are
warranted for the remainder of the original warranty period.
The manufacturer or its authorized service representatives
must perform all warranty repairs. Any repair to the product
by unauthorized service representatives voids this warranty.
The rights under this warranty are limited to the original user
and may not be transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or
implied, including warranties of merchantability and fitness
for a particular purpose. Some states do not allow the
exclusion or limitations of incidental or consequential
damages, so the above limitations may not apply to you.
1 YEAR LIMITED WARRANTY
1712463-14
QUICK CHANGE
ADJUSTABLE LIGHT MWL700
When unpacking, check the parts diagram and part number
listing on page 7 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
BEFORE USE
• Normal use of this product is likely to expose the user to
dust and/or microscopic particles containing chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Always wear
appropriate safety equipment and clothing when using this
product. Study, understand and follow all instructions
provided with this product. Failure to read and follow all
warnings and operating instructions may result in damages
and serious injury or death.
• Do not completely cover or submerge the unit in water or oil.
While designed to handle grime, sustained moisture and oil
inside the light will damage connections.
• Do not operate the charger or charger adapters if it has been
subjected to shock or damage; failure to do so may cause fire
and may result in personal injury and property damage.
• Do not use when it is wet, it can cause electric shock.
• This is not a toy. Do not allow children to play with this item.
• Do not stare into the beam when the light-bar is turn on, it
can cause damage to the eyes.
• Never plug in nor remove the charger adapter plug with wet
hands, as doing so may cause electric shock.
• Avoid using the charger adapter in humid or dusty locations,
in locations exposed to the direct sunlight, near the heaters,
or in locations generating sooty smoke or steam as doing so
may result in fire or electric shock.
Caution: To help prevent personal injury
avoid looking directly at light.
Study, understand and follow all instructions provided with
this product. Read these instructions carefully before
installing, operating, servicing or repairing this tool. Keep
these instructions in a safe accessible place.
This tool is designed as a hand-held portable rechargeable
battery powered light source with interchangeable lithium
battery cells to provide direct light to work areas. Do not use
this tool outside of the designed intent. Never modify the tool
for any other purpose or use.
Industry leading design. Innovative, wheel adjustable 700
lumen light with 90 lumen top flashlight.
Zero down time. Use your worklight like your other cordless
tools by swapping interchangeable batteries when light is low,
or charge both at the same time with the quick charging base
that charges at 2X speed.
Get more. Includes massive capacity 4,500mAh and
2,600mAh 26650 and 18650 standard size lithium batteries,
quick change 20 lbs. magnetic swivel base with folding hook
and 2X power charger. Made in China
to Matco specifications
Wheel Adjustment
Switch
Top Flashlight
Magnet Swivel Base
w/ Hook

Page 2 1712463-14
QUICK CHANGE
ADJUSTABLE LIGHT MWL700
1. Prior to charging, make sure the right voltage (110/120V)
is available.
2. Prior to each charge, make sure the light and wall outlet
supply cable is not damaged in any way. Never use the
product if you find damage.
3. Do not use the product in explosive environments in which
flammable liquids, gases or dusts are present. Risk to life!
4. LED lights are extremely bright. Do not look directly at the lamp.
PLEASE NOTE:
The COB light source is not replaceable; when the light
source reaches its end of life the whole light should be
replaced.
Dispose of electrical devices in an environmentally
responsible manner!
Do not dispose of electrical devices and especially battery
cells with household rubbish.
Please contact your local authorities for available disposal
options for your worn-out device.
Do not use solvents, corrosive cleaners or the like. Use a dry
or slightly moist cloth for cleaning ONLY.
TECHNICAL SPECIFICATIONS: SAFETY NOTES:
MAINTENANCE:
CLEANING:
DISPOSAL:
Illuminant
Luminous flux
Color temperature
Input voltage
Output
Operating time
Charging time
Battery
Switch
Operating temperature
Dimensions L/W/H
Net weight
Materials
Front: COB
Flashlight: 1 x SMD
Front: 700 lm (when on full charge,
max can reach 750 lm +/- 40 lm)
Flashlight: 90 lm
5500K (+/- 300K)
5V 2A-3A
Light Charging Location:
4.2V 1A(Max.)
Quick Charging Slot:
4.2V 1A(Max.)
For 18650:
2.5H (High), 4.5H (Medium)
Front COB, 14H Top SMD
For 26650:
4-4.5H (High), 7H (Medium)
Front COB, 22H Top SMD
For 2X Quick Charging Slot:
2.8H (18650), 4.5H (26650)
For Light Charging Location:
4.5H (18650), 6.5-7H (26650)
Li-Ion 3.7V
Adjustable Dimming Vertical
Wheel + Button Switch Flashlight
-10˚C ~ +46˚C
170 x 85 x 450mm
600g (without battery)
Nylon + PMMA
- Chemical resistant material
Your
BATTERIES
Because lithium battery cells normally cycle out in products before the light has
stopped working, this light has been designed to interchangeably use 18650 and 26650
style batteries increasing the life of the tool.
1.
2.
3.
While other brands and sources of 18650 and 26650 lithium batteries may make this light function,
note that the provided part# BAT2600 and BAT4500 batteries are high quality UL listed products rated
and designed for use with this light, quick charging base and wall adapter.
Use of other other batteries may not operate the light to its advertised specs, may damage the
batteries when charged, damage the charger or light itself, cause damage to property, and/or cause
injury or death in the event of a fire or shock.
4. The wall adapter provided with this product is also designed specifically for this product. Use of other
USB style products will likely not charge at the advertised rate and may cause damage or injury.
WARNING

Page 3
INFORMACIÓN DEL PRODUCTO:
EL USO DE LA HERRAMIETA
NO LO DESCARTE O DESECHE, ENTREGESELO AL USUARIO
GARANTÍA LIMITADA DE UN AÑO
1712463-14
QUICK CHANGE
ADJUSTABLE LIGHT MWL700
DESEMPACADO
HECHO en China
para Matco especificaciones
ADVERTENCIA
ADVERTENCIA
El fabricante garantiza este producto al usuario original contra
defectos de materiales o de mano de obra durante un periodo
de un año a partir de la fecha de compra.
El fabricante se reserva el derecho a determinar si una pieza o
piezas fallaron debido a material defectuoso, mano de obra, o
por otras causas. Esta garantía no cubre fallas causadas por
accidentes, alteraciones o uso indebido.
El fabricante, a su entera discreción, reparará o reemplazará
los productos cubiertos por esta garantía sin costo alguno.
Las reparaciones o reemplazos de productos cubiertos por
esta garantía quedan garantizados durante el resto del periodo
original de garantía.
El fabricante o sus representantes autorizados de servicio
deben llevar a cabo todas las reparaciones de garantía. Toda
reparación hecha al producto por representantes de servicio
no autorizados invalida la presente garantía.
Los derechos que ampara esta garantía están limitados al
usuario original y no se pueden transferir a dueños posteriores.
Esta garantía reemplaza a todas las demás garantías expresas
o implícitas, incluyendo garantías de comercialización e
idoneidad para un propósito particular. Algunos estados no
permiten la exclusión o limitaciones de daños incidentales o
imprevistos, de manera que las limitaciones mencionadas
anteriormente pueden no ser aplicables en su caso.
Cuando desempaque el producto, revise el diagrama y la lista
de piezas en página 7 para verificar que se hayan enviado
todas las piezas. De perder piezas o tener piezas dañadas,
favor llamar a su distribuidor inmediatamente.
• Normal use of this product is likely to expose the user to
dust and/or microscopic particles containing chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Always wear
appropriate safety equipment and clothing when using this
product. Study, understand and follow all instructions
provided with this product. Failure to read and follow all
warnings and operating instructions may result in damages
and serious injury or death.
• Do not completely cover or submerge the unit in water or oil.
While designed to handle grime, sustained moisture and oil
inside the light will damage connections.
• Do not operate the charger or charger adapters if it has been
subjected to shock or damage; failure to do so may cause fire
and may result in personal injury and property damage.
• Do not use when it is wet, it can cause electric shock.
• This is not a toy. Do not allow children to play with this item.
• Do not stare into the beam when the light-bar is turn on, it
can cause damage to the eyes.
• Never plug in nor remove the charger adapter plug with wet
hands, as doing so may cause electric shock.
• Avoid using the charger adapter in humid or dusty locations,
in locations exposed to the direct sunlight, near the heaters,
or in locations generating sooty smoke or steam as doing so
may result in fire or electric shock.
Caution: To help prevent personal injury
avoid looking directly at light.
Estudie, entienda y siga todas las instrucciones que se proveen
con este producto. Lea las instrucciones detenidamente antes
de instalar, operar, dar servicio o reparar esta herramienta.
Guarde estas instrucciones en un lugar seguro y accesible.
This tool is designed as a hand-held portable rechargeable
battery powered light source with interchangeable lithium
battery cells to provides direct light to work areas. Do not use
this tool outside of the designed intent. Never modify the tool
for any other purpose or use.
Industry leading design. Innovative, wheel adjustable 700
lumen light with 90 lumen top flashlight.
Zero down time. Use your worklight like your other cordless
tools by swapping interchangeable batteries when light is low,
or charge both at the same time with the quick charging base
that charges at 2X speed.
Get more. Includes massive capacity 4,500mAh and
2,600mAh 26650 and 18650 standard size lithium batteries,
quick change 20 lbs. magnetic swivel base with folding hook
and 2X power charger.
Wheel Adjustment
Switch
Top Flashlight
Magnet Swivel Base
w/ Hook
(SPANISH)

Illuminant
Luminous flux
Color temperature
Input voltage
Output
Operating time
Charging time
Battery
Switch
Operating temperature
Dimensions L/W/H
Net weight
Materials
Front: COB
Flashlight: 1 x SMD
Front: 700 lm (when on full charge,
max can reach 750 lm +/- 40 lm)
Flashlight: 90 lm
5500K (+/- 300K)
5V 2A-3A
Light Charging Location:
4.2V 1A(Max.)
Quick Charging Slot:
4.2V 1A(Max.)
For 18650:
2.5H (High), 4.5H (Medium)
Front COB, 14H Top SMD
For 26650:
4-4.5H (High), 7H (Medium)
Front COB, 22H Top SMD
For 2X Quick Charging Slot:
2.8H (18650), 4.5H (26650)
For Light Charging Location:
4.5H (18650), 6.5-7H (26650)
Li-Ion 3.7V
Adjustable Dimming Vertical
Wheel + Button Switch Flashlight
-10˚C ~ +46˚C
170 x 85 x 450mm
600g (without battery)
Nylon + PMMA
- Chemical resistant material
Page 4 1712463-14
QUICK CHANGE
ADJUSTABLE LIGHT MWL700
1. Prior to charging, make sure the right voltage (110/120V)
is available.
2. Prior to each charge, make sure the light and wall outlet
supply cable is not damaged in any way. Never use the
product if you find damage.
3. Do not use the product in explosive environments in which
flammable liquids, gases or dusts are present. Risk to life!
4. LED lights are extremely bright. Do not look directly at the lamp.
PLEASE NOTE:
The COB light source is not replaceable; when the light
source reaches its end of life the whole light should be
replaced.
Dispose of electrical devices in an environmentally
responsible manner!
Do not dispose of electrical devices and especially battery
cells with household rubbish.
Please contact your local authorities for available disposal
options for your worn-out device.
Do not use solvents, corrosive cleaners or the like. Use a dry
or slightly moist cloth for cleaning ONLY.
TECHNICAL SPECIFICATIONS: SAFETY NOTES:
MAINTENANCE:
CLEANING:
DISPOSAL:
Because lithium battery cells normally cycle out in products before the light has
stopped working, this light has been designed to interchangeably use 18650 and 26650
style batteries increasing the life of the tool.
1.
2.
3.
While other brands and sources of 18650 and 26650 lithium batteries may make this light function,
note that the provided part# BAT2600 and BAT4500 batteries are high quality UL listed products rated
and designed for use with this light, quick charging base and wall adapter.
Use of other other batteries may not operate the light to its advertised specs, may damage the
batteries when charged, damage the charger or light itself, cause damage to property, and/or cause
injury or death in the event of a fire or shock.
4. The wall adapter provided with this product is also designed specifically for this product. Use of other
USB style products will likely not charge at the advertised rate and may cause damage or injury.
ADVERTENCIA
Your
BATTERIES
(SPANISH)

Page 5
INFORMATIONS PRODUIT:
1712463-14
QUICK CHANGE
ADJUSTABLE LIGHT MWL700
Lors du déballage, vérifier que les pièces contenues dans
le schéma et la liste des numéros de pièces de la page 7
sont toutes incluses. Si une pièce est manquante ou abîmée,
veuillez appeler immédiatement votre distributeur.
DÉBALLAGE
NE PAS JETER-DONNER À L'UTILISATEUR
Fabriqué à Chine
les spécifications de Matco
AVERTISSEMENT
AVERTISSEMENT
Etudier, comprendre et suivre toutes les instructions fournies
avec ce produit. Lire ces instructions attentivement avant
d’installer, d’utiliser, d’entretenir et de réparer cet outil.
Conserver ces instructions dans un endroit sécuritaire
et accessible.
UTILISATION PRÉVUE DE L’OUTIL
1 ANNÉE DE GARANTIE LIMITÉE
Le manufacturier garantit à l’acheteur initial que ce produit est
exempt de tout vice de matériau et de fabrication pendant une
période de une année suivant la date de l’achat.
Le manufacturier se réserve le droit de déterminer si la pièce ou
les pièces défectueuses sont imputables à un matériau défectueux,
à un défaut de fabrication ou à d’autres causes. Les défaillances
causées par un accident, une modification ou une utilisation
incorrecte ne sont pas couvertes par la présente garantie.
Le manufacturier, à sa seule discrétion, réparera ou remplacera
sans frais les produits couverts par cette garantie. Les réparations
ou les remplacements de produits couverts par cette garantie sont
garantis pour le reste de la période de garantie initiale.
Le manufacturier ou ses représentants de service autorisés doivent
exécuter les réparations sous garantie. Toute réparation du produit
effectuée par un représentant de service non-autorisé annulera
cette garantie. Les droits couverts par cette garantie sont limités à
l'acheteur initial et ne peuvent être transférés aux propriétaires
subséquents.
Cette garantie remplace toutes autres garanties, expresses ou
implicites, incluant les garanties de valeur marchande ou
d’adaptation à un usage particulier. Certains États ou provinces ne
permettent pas d’exclure ou de limiter les dommages consécutifs
ou indirects, donc les limitations ci-dessus pourraient ne pas
s’appliquer.
• Normal use of this product is likely to expose the user to
dust and/or microscopic particles containing chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Always wear
appropriate safety equipment and clothing when using this
product. Study, understand and follow all instructions
provided with this product. Failure to read and follow all
warnings and operating instructions may result in damages
and serious injury or death.
• Do not completely cover or submerge the unit in water or oil.
While designed to handle grime, sustained moisture and oil
inside the light will damage connections.
• Do not operate the charger or charger adapters if it has been
subjected to shock or damage; failure to do so may cause fire
and may result in personal injury and property damage.
• Do not use when it is wet, it can cause electric shock.
• This is not a toy. Do not allow children to play with this item.
• Do not stare into the beam when the light-bar is turn on, it
can cause damage to the eyes.
• Never plug in nor remove the charger adapter plug with wet
hands, as doing so may cause electric shock.
• Avoid using the charger adapter in humid or dusty locations,
in locations exposed to the direct sunlight, near the heaters,
or in locations generating sooty smoke or steam as doing so
may result in fire or electric shock.
Caution: To help prevent personal injury
avoid looking directly at light.
This tool is designed as a hand-held portable rechargeable
battery powered light source with interchangeable lithium
battery cells to provides direct light to work areas. Do not use
this tool outside of the designed intent. Never modify the tool
for any other purpose or use.
Industry leading design. Innovative, wheel adjustable 700
lumen light with 90 lumen top flashlight.
Zero down time. Use your worklight like your other cordless
tools by swapping interchangeable batteries when light is low,
or charge both at the same time with the quick charging base
that charges at 2X speed.
Get more. Includes massive capacity 4,500mAh and
2,600mAh 26650 and 18650 standard size lithium batteries,
quick change 20 lbs. magnetic swivel base with folding hook
and 2X power charger.
Wheel Adjustment
Switch
Top Flashlight
Magnet Swivel Base
w/ Hook
(FRENCH)

Illuminant
Luminous flux
Color temperature
Input voltage
Output
Operating time
Charging time
Battery
Switch
Operating temperature
Dimensions L/W/H
Net weight
Materials
Front: COB
Flashlight: 1 x SMD
Front: 700 lm (when on full charge,
max can reach 750 lm +/- 40 lm)
Flashlight: 90 lm
5500K (+/- 300K)
5V 2A-3A
Light Charging Location:
4.2V 1A(Max.)
Quick Charging Slot:
4.2V 1A(Max.)
For 18650:
2.5H (High), 4.5H (Medium)
Front COB, 14H Top SMD
For 26650:
4-4.5H (High), 7H (Medium)
Front COB, 22H Top SMD
For 2X Quick Charging Slot:
2.8H (18650), 4.5H (26650)
For Light Charging Location:
4.5H (18650), 6.5-7H (26650)
Li-Ion 3.7V
Adjustable Dimming Vertical
Wheel + Button Switch Flashlight
-10˚C ~ +46˚C
170 x 85 x 450mm
600g (without battery)
Nylon + PMMA
- Chemical resistant material
Page 6 1712463-14
QUICK CHANGE
ADJUSTABLE LIGHT MWL700
1. Prior to charging, make sure the right voltage (110/120V)
is available.
2. Prior to each charge, make sure the light and wall outlet
supply cable is not damaged in any way. Never use the
product if you find damage.
3. Do not use the product in explosive environments in which
flammable liquids, gases or dusts are present. Risk to life!
4. LED lights are extremely bright. Do not look directly at the lamp.
PLEASE NOTE:
The COB light source is not replaceable; when the light
source reaches its end of life the whole light should be
replaced.
Dispose of electrical devices in an environmentally
responsible manner!
Do not dispose of electrical devices and especially battery
cells with household rubbish.
Please contact your local authorities for available disposal
options for your worn-out device.
Do not use solvents, corrosive cleaners or the like. Use a dry
or slightly moist cloth for cleaning ONLY.
TECHNICAL SPECIFICATIONS: SAFETY NOTES:
MAINTENANCE:
CLEANING:
DISPOSAL:
Because lithium battery cells normally cycle out in products before the light has
stopped working, this light has been designed to interchangeably use 18650 and 26650
style batteries increasing the life of the tool.
While other brands and sources of 18650 and 26650 lithium batteries may make this light function,
note that the provided part# BAT2600 and BAT4500 batteries are high quality UL listed products rated
and designed for use with this light, quick charging base and wall adapter.
Use of other other batteries may not operate the light to its advertised specs, may damage the
batteries when charged, damage the charger or light itself, cause damage to property, and/or cause
injury or death in the event of a fire or shock.
The wall adapter provided with this product is also designed specifically for this product. Use of other
USB style products will likely not charge at the advertised rate and may cause damage or injury.
AVERTISSEMENT
2.
3.
4.
1.
Your
BATTERIES
(FRENCH)

Page 7
PARTS BREAKDOWN
1712463-14
QUICK CHANGE
ADJUSTABLE LIGHT MWL700
Index No. Part No. Description
1
2
3
4
5
6
7
8
9
10
2600mAh 18650 Lithium Battery
4500mAh 26650 Lithium Battery
Magnetic Base Assembly
Magnetic Base Quick Release
Magnetic Base Nut
Base Magnet Only
Quick Charging Base
18650 Enlarging Sleeve
USB Cable
Quick Charge Wall Adapter Plug
Parts List
BAT2600
BAT4500
MWL700-MAG
MWL700-MAG1
MWL700-MAG2
MWL700-MAG3
MWL700-1
MWL700-2
MWL700-CH2
MWL700-CH1
1
9 10
8
7
2
5
4
6
3