Matsing MS-MBA-2-L2 User manual

TABLE OF CONTENTS:
BEAMS & CONNECTORS:
Plan View Resultant Beam Layout
Connector Ports Table
Connector Detail
Connector Layout
PATTERN DIAGRAM
Horizontal Pattern
LB Frequency: 698 - 960 MHz
TB Frequency: 617 - 896 MHz
Vertical Pattern
MANUAL TILT ADJUSTMENT
BRACKET INSTALLATION
Bolts & Nuts Requirements
Bolts & Nuts
Bracket
Tools Requirement
Adjustable Spanner
M12 Spanner
Bracket Spacing &
Installation Sample
Revision History:
[email protected] www.matsing.com 1 / 5
1.30
1.40
1 Apr 2021
Date
Description
Revised by
Revision
nos.
01-04-21
Update the latest information and included MBA-2-T2 into same
instruction manual.
Ray Ling
1
email:
website:
Page
4.12
4.20
4.21
4.22
4.00
4.10
4.11
4.30
Ray Ling
Patrick Yeo
Date
Prepared by
Approved by
MS-MBA-2-L2 & MBA-2-T2
Instruction Manual
Rev
1
Document nos
MS-MBA-2-L2&T2-001
INSTRUCTION MANUAL MS-MBA-2-L2 & MBA-2-T2
1.00
1.10
1.20
2.00
2.10
2.11
2.12
2.20
3.00

BEAMS & CONNECTORS:
Plan View Resultant Beam Layout
Connector Ports Table Connector Detail
Connector Layout
Page 2 / 5
1.20
MS-MBA-2-L2/MBA-2-T2
Connector Table
BEAM 2
BEAM 1
Port 3 (+45˚)
1.30
1.40
1.00
1.10
Port 1 (+45˚)
Port 4 (-45˚)
Port 2 (-45˚)
Port 1 (+45˚)
Port 2 (-45˚)
Port 3 (+45˚)
Port 4 (-45˚)
BEAM 1
BEAM 2
MS-MBA-2-L2 / MBA-2-T2
REAR VIEW CONNECTOR LAYOUT
AISG

PATTERN DIAGRAM
Horizontal Pattern
LB Frequency: 698 - 960 MHz
TB Frequency: 617 - 896 MHz
Vertical Pattern
3 / 5
Page
2.00
2.10
2.11
2.12
2.20
698 -960 MHz
Frequency:
MS-MBA-2-L2
617 -896 MHz
Frequency:
MS-MBA-2-T2


698 -960 MHz
Frequency:
MS-MBA-2-L2
617 -896 MHz
Frequency:
MS-MBA-2-T2

MANUAL TILT ADJUSTMENT
BRACKET INSTALLATION
Bolts & Nuts Requirements
Bolts & Nuts Bracket
4 / 5
2
M12 x
200mm
4
M12
10
4.11
4.12
1
All MBA's Antennas
Bolts
Nuts
Qty
Size
Qty
The MBA antenna come in RET mode as default, but if needed can also be manually
adjusted. To do so, please unscrew the waterproof cap behind the element whose tilt
is to be adjusted.
By Default the knob is on engaged mode, pull out the handle for manual tilt
adjustment, turn the handle to change the tilt.
When done, push the handle back in, screw the waterproof cap back to the position.
1
Size
Qty
Bracket
2
3
4.00
4.10
nos
Model Apply
3.00
Unscrew/Screw the cap for
tilt adjustment process
Engaged with internal RET
motor position
Pull knob out to disengaged
RET for tilt adjustment
Tilt
Adjustment
Knob
Angle Indicator
RET Controller

Tools Requirement
Adjustable Spanner
M12 Spanner
Bracket Spacing &
Installation Sample
5 / 5
4.22
4.30
4.20
4.21