Matsing MS-MBA-3-L4A2 User manual

TABLE OF CONTENTS:
BEAMS & CONNECTORS:
Plan View Resultant Beam Layout
Connector Port Table
Connector Detail
Connector Layout
PATTERN DIAGRAM
Horizontal Pattern
Vertical Pattern
MANUAL TILT ADJUSTMENT
BRACKET INSTALLATION
Bolts & Nuts Requirements
Bolts & Nuts
Bracket
Tools Requirement
Adjustable Spanner
M12 Spanner
Bracket Spacing & Installation Sample
Revision History:
[email protected]
www.matsing.com 1 / 5
1.00
1.10
1.20
1.30
1.40
2.00
2.20
3.00
4.00
4.10
4.11
4.12
4.21
4.22
0
INSTRUCTION MANUAL MS-MBA-3-L4A2
MS-MBA-3-L4A2
Instruction Manual
Date
Prepared by
Approved by
Document nos
Rev
27 Feb 2023
Ray Ling
Pavel
MBA-3-L4A2-001
4.20
2.10
Date
Description
Revised by
4.30
email:
website:
Page
Revision
nos.

BEAMS & CONNECTORS:
Plan View Resultant Beam Layout Connector Port Table
Connector Layout
Connector Detail
2 / 5
1.00
1.10
1.20
(+45˚)
(+45˚)
(+45˚)
Port 12
Port 8
Port 4
BEAM 3
BEAM 2
BEAM 1
Port 11
Port 7
Port 3
(-45˚)
(-45˚)
(-45˚)
1.40
1.30
Page
Port 6
Port 2
(-45˚)
(-45˚)
(-45˚)
Port 9
Port 5
Port 1
(+45˚)
(+45˚)
(+45˚)
Port 10
REAR VIEW CONNECTOR LAYOUT
MS-MBA-3-L4A2
BEAM 2
Port 1 (+45˚)
Port 2 (-45˚)Port 3 (+45˚)
Port 4 (-45˚)
Port 5 (+45˚)
Port 6 (-45˚)
Port 7 (+45˚)
Port 8 (-45˚)
Port 11 (+45˚)
Port 12 (-45˚)
Port 9 (+45˚)
Port 10 (-45˚)
BEAM 1BEAM 3
AISG IN-1
LB Beam: 1
LB Ports: 1,2,3,4
AISG IN-2
LB Beam: 2
LB Ports: 5,6,7,8
AISG IN
LB Beam: 3
LB Ports: 9,10,11,12
BEAM 2
0˚
BEAM 2
Plan View Resultant Beam Directions
Frequency: 698 - 960 MHz

PATTERN DIAGRAM
Horizontal Pattern
Vertical Pattern
3 / 5
2.00
2.10
Page
2.20

698 -960 MHz
Frequency:
MS-MBA-3-L4A2
BEAM 2




MS-MBA-3-L4A2
698 -960 MHz
Frequency:

MANUAL TILT ADJUSTMENT
4 / 5
3
When done, push the handle back in, screw the waterproof cap back to the
position.
3.00
1
The MBA antenna come in RET mode as default, but if needed can also be
manually adjusted. To do so, please unscrew the waterproof cap behind the
element whose tilt is to be adjusted.
2
By Default the knob is on engaged mode, pull out the handle for manual tilt
adjustment, turn the handle to change the tilt.
Page
RET
Controller
Tilt
Adjustment
Knob
Angle
Indicator

BRACKET INSTALLATION
Bolts & Nuts Requirements Bolts & Nuts
Bracket
Tools Requirement
Adjustable Spanner M12 Spanner
Bracket Spacing & Installation Sample
5 / 5
Bracket
Bolts
Nuts
Qty
Size
Qty
Size
Qty
2
M12 x
200mm
4
M12
10
4.11
4.00
4.10
4.12
4.20
4.21
4.22
4.30
Page
R76.0mm
R76.0mm
185mm