Matsusada RK Series User manual

Instruction Manual
MODEL RK/REK/REKJ Series Digital Interface
Standard Digital Interface
LGob Option
LUs1 Option
LEt Option
Rev. 0.5
B/N 167.9.097 *167.9.097*

Ｄｕｍｍｙ Ｐａｇｅ

i
CONTENTS Page
１Introduction .................................................................................................................................................................................. 1
１－１ Introduction ................................................................................................................................................................. 1
１－２ Unpacking the unit .................................................................................................................................................. 1
１－３ Environmental requirements ............................................................................................................................. 1
１－４ Notes ............................................................................................................................................................................. 1
１－５ Notes at digital connection ................................................................................................................................... 2
２Exterior view diagram ............................................................................................................................................................ 3
２－１ Standard Digital Interface ................................................................................................................................... 3
２－２ LGob Option .............................................................................................................................................................. 4
２－３ LUs1 Option ............................................................................................................................................................... 5
２－４ LEt Option ................................................................................................................................................................... 6
２－５ LMi Option .................................................................................................................................................................. 7
３Connection diagram ............................................................................................................................................................... 8
３－１ RK(400W/800W/1200W)/REK/REKJ Series (Standard Digital Interface), CO-MET2-25,CO-MET2-9,CO-MET4-25 . 8
３－２ RK(400W/800W/1200W)/REK/REKJ Series (Standard Digital Interface), CO-G32m ........ 9
３－３ RK(400W/800W/1200W)/REK/REKJ Series (LGob Option), CO-OPT2-25/CO-OPT2-9/CO-OPT4-25 1 0
３－４ RK(400W/800W/1200W)/REK/REKJ Series (LGob Option), CO-G32 ..................................... 11
３－５ RK(400W/800W/1200W)/REK/REKJ Series (LGob Option), CO-U32...................................... 12
３－６ RK(400W/800W/1200W)/REK/REKJ Series (LUs1 Option) ........................................................... 13
３－７ RK(400W/800W/1200W)/REK/REKJ Series (Standard Digital Interface), CO-U32m ....... 14
３－８ RK(400W/800W/1200W)/REK/REKJ Series (Standard Digital Interface), CO-E32m ....... 15
３－９ RK(400W/800W/1200W)/REK/REKJ Series (LEt Option) ............................................................... 1 6
３－１０ RK(400W/800W/1200W)/REK/REKJ Series (LGob Option), CO-E32 ...................................... 17
４Functions .................................................................................................................................................................................... 18
４－１ Summary ................................................................................................................................................................... 18
４－２ Setting of UNIT number (unit with Standard Digital Interface) ....................................................... 18
４－３ Setting of digital interface ................................................................................................................................. 18
４－４ CO-M cable connector Interface terminal details (Standard Digital Interface) ...................... 19
４－５ Settings address and delimiter for GPIB(CO-G32/CO-G32m) ...................................................... 20
４－６ USB Setting(CO-U32/CO-U32m/LUs1 Option) ..................................................................................... 21
４－７ LAN Setting(CO-E32/CO-E32m/LEt Option) .......................................................................................... 21
４－８ Settings unit number and upper connection(LGob Option) ............................................................ 22
４－９ Settings of CO-MET2-25/CO-MET2-9 (Standard Digital Interface) ............................................ 23
４－１０ Settings of CO-OPT2-25/CO-OPT2-9 (LGob Option) ........................................................................ 24
４－１１ Settings of CO-MET4-25/CO-OPT4-25 ..................................................................................................... 25
５Program ...................................................................................................................................................................................... 26
５－１ Summary of Syntax .............................................................................................................................................. 26

ii
５－２ Multiple command ................................................................................................................................................. 26
５－３ Character set for the command ..................................................................................................................... 27
５－４ Returned data ......................................................................................................................................................... 27
６Getting started ......................................................................................................................................................................... 28
６－１ CO-MET2-25/CO-MET2-9/CO-MET4-25, Standard Digital Interface ........................................ 28
６－２ CO-G32m, Standard Digital Interface ......................................................................................................... 29
６－３ CO-U32m, Standard Digital Interface ......................................................................................................... 30
６－４ CO-E32m, Standard Digital Interface ......................................................................................................... 31
６－５ CO-OPT2-25/CO-OPT2-9/CO-OPT4-25, LGob option ..................................................................... 32
６－６ CO-G32, LGob Option ........................................................................................................................................ 33
６－７ CO-U32, LGob Option ........................................................................................................................................ 34
６－８ CO-E32, LGob Option ........................................................................................................................................ 35
６－９ LUs1 option .............................................................................................................................................................. 36
６－１０ LEt option .................................................................................................................................................................. 37
７Command reference ............................................................................................................................................................. 38
７－１ Command list .......................................................................................................................................................... 38
７－２ Reference .................................................................................................................................................................. 39
７－３ Minimum setting / return value list ................................................................................................................ 53
８–LEt option................................................................................................................................................................................. 54
８－１ Summary ................................................................................................................................................................... 54
８－２ LAN connector ........................................................................................................................................................ 54
８－３ Network setting ....................................................................................................................................................... 54
８－４ Attention of network setting ............................................................................................................................. 54
８－５ Connection example of –LEt option for RK(400/800/1200)/REK/REKJ series ..................... 55
８－６ Network address setting .................................................................................................................................... 56
８－７ VB sample program ............................................................................................................................................. 61
８－８ VC sample program ............................................................................................................................................. 63

iii
Ｄｕｍｍｙ Ｐａｇｅ

１ Introduction
1
１ Introduction
１－１ Introduction
Thank you very much for your purchase of our product.
We have done our best for our quality control of out products. Please handle this unit
properly according to this instruction manual so that you can use the full capacity of
this unit and operate it safely and smoothly in high efficiency for long.
If you find any doubtful or unknown point or omission in this instruction manual, please
kindly contact us immediately.
１－２ Unpacking the unit
When unpacking the unit, please check the following accessories are enclosed with the
unit main body.
Accessories
・ Instruction manual
・ USB diver Install guide (for LUs1 option)
・ USB driver disc (for LUs1 option)
・ CO-M Cable (option nothing)
・ CO-Optical fiber cable (for LGob option)
１－３ Environmental requirements
Warning
Install the unit horizontally when use.
Never place any object on the power supply.
Use the power supply where the ventilation condition is good.
Do not operate the power supply in a dusty area or in corrosive gas environment.
１－４ Notes
Warning
When system has high voltage power supply, equipments connected might receive
damage due to high voltage.
When operate with GPIB interface, connect only cables required for system operation.
The power supply has protection for intermittent short circuit, however operation with
repeatable short circuit with arc should be avoided.
The power supply has enough protection for noise, however if hung-up or voltage
output, which is not programmed, are observed, turn of the power supply and reset
the but, then resend the command again from controller.
Any system change shall be done while the power of all the equipments of system is
turned off. Sometimes it prevents the unit to function properly that causing of high
voltage.
！ 
！ 

１ Introduction
2
１－５ Notes at digital connection
Please make “M_S”; Master/Slave setting on the start menu “OFF”, for digital
connection.
* Master is also available. But communication may be late.
OUTPUT
REMOTE
LOCK
OVP/
OCP
SET
CV
CC
A
V
Master/Slave
“OFF”Setting
Slave setting
* When -LUs1 / -LGob / -LEt optional models which do no function-settings switch on the rear
panel are communicated to an external controller or PC, it needs to set “Int. F” in start menu to
“Opt”.
* It is not applicable on the master unit for LGob option.

２ Exterior view diagram
3
２ Exterior view diagram
２－１ Standard Digital Interface
①
②
ＩＮＰＵＴ AC100-240V 20A
50/60Hz Φ1 2000VA
L N
① CO-M cable connector (IN)
② CO-M cable connector (OUT)
③ Master/Slave setting switch
④ UNIT number setting switch
RK(400W) Series Rear panel
①
②
RK(800W) Series Rear panel RK(1200W) Series Rear panel
REK Series Rear panel
REKJ Series Rear panel
①
②
①
②③ ④
②
①
③

２ Exterior view diagram
4
２－２ LGob Option
① CO-Optical fiber cable connector (IN)
② CO-Optical fiber cable connector (OUT)
③ UNIT number setting switch
RK(400W) Series Rear panel
①
②
③
RK(800W) Series Rear panel RK(1200W) Series Rear panel
ＩＮＰＵＴ AC100-240V 20A
50/60Hz Φ1 2000VA
L N
ＯＵＴ ＩＮ ＵＮＩＴ
REK Series Rear panel
REKJ Series Rear panel
③ ① ②
③
①
②
③
①
②
③
①
②

２ Exterior view diagram
5
２－３ LUs1 Option
① USB connector (Type B)
RK(400W) Series Rear panel
①
RK(800W) Series Rear panel RK(1200W) Series Rear panel
REK Series Rear panel
REKJ Series Rear panel
①
①
①
①
REK Series Rear panel

２ Exterior view diagram
6
２－４ LEt Option
REKJ Series Rear panel
①LAN connector (RJ-45)
RK(400W) Series Rear panel
①
RK(800W) Series Rear panel RK(1200W) Series Rear panel
①
REK Series Rear panel
①
① ①

２ Exterior view diagram
7
２－５ LMi Option
①CO-M cable connector (OUT)
②CO-M cable connector (IN)
③LAN connector (RJ-45)
④USB connector (Type B)
⑤RS-485 cable connector
(FK-MC 0,5/5-ST-2,5 : Phoenix contact)
①②
①②
③
REKJ Series Rear panel
④⑤
③④⑤REK Series Rear panel

３ Connection diagram
8
３ Connection diagram
３－１ RK(400W/800W/1200W)/REK/REKJ Series (Standard Digital Interface), CO-MET2-25,CO-MET2-9,CO-MET4-25
CO-MET2-25
CO-MET2-9
CO-MET4-25 RK
(
400W
)
Series Rear
p
anel
RK
(
400W
)
Series Rear
p
anel
CO-M Cable
U
p
to 16 units can be connected
NOTE
・ For remote control of standard digital
interface, set the Master/Slave function
“M_S” of a starting menu as “OFF”.
RS-232C Controller/
RS-485 Controller
AC Adapter
Only at CO-MET4-25

３ Connection diagram
9
３－２ RK(400W/800W/1200W)/REK/REKJ Series (Standard Digital Interface), CO-G32m
CO-G32m Rear panel
RK
(
400W
)
Series Rear
p
anel
RK
(
400W
)
Series Rear
p
anel
CO-M Cable
GPIB Cable
U
p
to16 units can be connected
NOTE
・For remote control of standard
digital interface, set the Master/Slave
function “M_S” of a starting menu as
“OFF”.
GPIB Controller

３ Connection diagram
10
３－３ RK(400W/800W/1200W)/REK/REKJ Series (LGob Option), CO-OPT2-25/CO-OPT2-9/CO-OPT4-25
NOTE
・ Place a cap on the optical fiber cable connector not in use.
・ This unit has enough protection. However when used with HV power supplies, there is possibility
that noise on AC line, which can be generated when HV arc, can cause malfunction on GPIB
adapter, so it is recommended to have differentAC line from that of HV power supplies.
RK(400W) Series Rear panel
(LGob Option)
AC Ada
p
te
r
CO-OPT2-25
CO-OPT2-9
CO-OPT4-25
CO-O
p
tical fiber cable
RK(400W) Series Rear panel
(LGob Option)
or
U
p
to 32 units can be connected
CO-O
p
tical fiber cable
RS-232C Controller/
RS-485 Controller

３ Connection diagram
11
３－４ RK(400W/800W/1200W)/REK/REKJ Series (LGob Option), CO-G32
NOTE
・Place a cap on the optical fiber cable
connector not in use.
・This unit has enough protection.
However when used with HV power
supplies, there is possibility that noise
on AC line, which can be generated
when HV arc, can cause malfunction
on GPIB adapter, so it is
recommended to have different AC line
from that of HV power supplies.
GPIB Controller
RK(400W) Series Rear panel
(LGob Option)
RK(400W) Series Rear panel
(LGob Option)
o
r
U
p
to 32 units can be connected
CO-G32 Rear
p
anel
GPIB Cable
CO-Optical fiber cable

３ Connection diagram
12
３－５ RK(400W/800W/1200W)/REK/REKJ Series (LGob Option), CO-U32
USB Controller
RK(400W) Series Rear panel
(LGob Option)
RK(400W) Series Rear panel
(LGob Option)
o
r
Up to 32 units can be connected
CO-U32 Rear
p
anel
USB Cable
CO-Optical fiber cable
NOTE
・Place a cap on the optical fiber cable
connector not in use.
・This unit has enough protection.
However when used with HV power
supplies, there is possibility that noise
on AC line, which can be generated
when HV arc, can cause malfunction
on GPIB adapter, so it is
recommended to have different AC line
from that of HV power supplies.

３ Connection diagram
13
３－６ RK(400W/800W/1200W)/REK/REKJ Series (LUs1 Option)
USB Cable
RK(400W) Series Rear panel
(LUs1 Option)
USB Controller

３ Connection diagram
14
３－７ RK(400W/800W/1200W)/REK/REKJ Series (Standard Digital Interface), CO-U32m
USB Controller
USB Cable
RK(400W) Series Rear panel
RK(400W) Series Rear panel
CO-M Cable
Up to 16 units can be connected
NOTE
・For remote control of standard
digital interface, set the
Master/Slave function “M_S” of a
starting menu as “OFF”.
CO-U32m Rear panel