Mattel polly pocket Wall Party User manual
You will need:
15 minutes
1’
Approximately
1 foot of open
wall space
Contents:
Before applying Command®Strips:
· CAUTION: NEVER use with wallpaper. May not adhere well to vinyl surfaces.
· CAUTION: NEVER hang items over beds.
· Make sure the wall surface is clean and dry. If cleaning is necessary 3M recommends using
isopropyl rubbing alcohol. DO NOT use household cleaners.
· Apply strips to surfaces above 50°F (10°C). Adhesive could lose adhesion above 105°F (40°C).
When removing bracket from wall:
· NEVER pull strip towards you.
· NEVER press bracket against wall.
· ALWAYS hold bracket gently in place to prevent
it from hitting fingers.
· ALWAYS pull tab on Command®Strip SLOWLY
AND STRAIGHT DOWN WALL. Stretch at least 12
inches (30.5 cm) until bracket and strip release.
Purchase medium Command®Refill Strips to reapply to your wall.
®
Hangs with
InstructionsInstructions
Watch a video of these instructions at
www.pollypocket.com/wallparty
NOTE: Video in English only.
TM
6How to Play
7Reattaching & Removal
1. Mounting plates are designed to break
away from the set without causing surface damage.
2. To remove bracket from the wall entirely:
a. NEVER pull strip towards you.
b. Hold bracket gently to prevent it from
snapping fingers. DO NOT press against wall.
c. Grab tab on Command®Strip and
SLOWLY STRETCH STRAIGHT DOWN ALONG
WALL AT LEAST 12 INCHES until bracket and
strip release.
3. Purchase medium Command®Refill Strips to
reapply to your wall.
®
Command®Strips are a product of 3M. For further information visit command.com
NOTE: Apply strips to surfaces above 50°F (10°C).
Adhesive could lose adhesion above 105°F (40°C).
CAUTION:
DO NOT use with wallpaper. May not adhere well to vinyl surfaces.
DO NOT hang items over beds.
3M and Command are trademarks of 3M.
© 3M 2012. All Rights Reserved.
1Assemble the Playset
2Apply Command®Strips
Separate strips. Remove red-printed liner
from one Command®Strip and apply to back
of bracket as shown. Make sure the strip tab
is accessible for future removal.
NOTE: DO NOT PULL BRACKET OFF WALL without reading
removal instructions.
Red Printing = On Bracket
Black Printing = On Wall
3Attach Bracket
Rear View Rear View
Hang Playset on Wall
4
5
1. Attach zip line to playset on wall.
2. Follow Steps 1-3 on the other Wall Party™playset instructions.
3. Attach zip line to other Wall Party™playset.
4. Position other playset to desired location, level against the wall.
5. Press playset firmly onto wall and hold for 30 seconds.
6. Connect all playsets together to create your own Wall Party™!
Connect with other Wall Party™Playsets (sold separately)
CHOKING HAZARD – Small parts.
Not for children under 3 years.
WARNING:
Y6435-0920
©2012 Mattel and/or Origin Products Ltd. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East
Aurora, NY 14052, U.S.A. 1-800-524-8697. Mattel Australia Pty. Ltd., Richmond, Victoria. 3121.
Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 1106, South Tower, World
Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.
(993532-P) Lot 13.5, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel:
03-78803817, Fax: 03-78803867. service.mattel.com
1. Remove black-printed liner from Command®Strip.
2. Position playset level against the wall at a suitable height for your child.
3. Press bracket firmly onto wall and hold for 30 seconds.
NOTE: For optimal adhesion performance, 3M recommends waiting 1 hour before adding weight
to Command®Strips.
Press
firmly for
30
seconds
Keep these instructions for future reference as they contain important information.
Please read all instructions before beginning assembly and set-up.
NOTE: For best results, apply suction cups on smooth area and clean suction cups with water periodically.
Open
for
storage!
INSTRUCTION SHEET
SPECIFICATIONS
Toy:
Toy No.:
Part No.:
Lang. Code:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
PP WL PRTY LWR AST
Y6435
0920
DOM
11.7 " W x8.3" H
5.85 " W x 4.15 " H
2 panel
1
Black
White Offset
70g recycle paper
1 Cover4 Rear
32
Command
Command
Command
Command
Command
Command
Comma
Comm
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Comma
Comm
Command
Command
Command
Command
Command
Command
Command
Command
Reattach in case of detaching.Reattach in case of detaching.
adode la PAREDladode l
ALL sideWALLside
MURCoté
R
aPARED ladode laPARE
L side WALLside WAL
CotéMUR CotéMU
CotéMUR
ladode la PARED lado
D
ide WALLside WALL
CotéMUR
CotéMUR
CotéMUR
ladode la PA
WALLside WALLsi
Comma
S
Command
Str ip
Com
Command
Strips
Command
Strips
Command
Strips
Command
Str ips
d
rips
ma nd
Strips
ommand
Str i
C
omm
C
C
S
t
Comma
S
Command
Str ip
Com
Command
Strips
Command
Strips
Command
Strips
Command
Str ips
d
rips
ma nd
Strips
ommand
Str i
C
omm
C
C
S
t
Comma
S
Command
Str ip
Com
Command
Strips
Command
Strips
Command
Strips
Command
Str ips
d
rips
ma nd
Strips
ommand
Str i
C
omm
C
C
S
t
adode la PAREDladode l
ALL sideWALLside
MURCoté
R
aPARED ladode la PARE
Lside WALL side WAL
CotéMU R CotéMU
CotéMUR
ladode la PARED lado
D
ide WALLside WALL
Coté MUR
CotéMURCotéMUR
ladode la PA
WALLside WALL si
30.5 cm
12"
30.5 cm
12"
Connects to
ALL
Wall Party™
playsets!
You will need:
15 minutes
1’
Approximately
1 foot of open
wall space
Contents:
Before applying Command®Strips:
· CAUTION: NEVER use with wallpaper. May not adhere well to vinyl surfaces.
· CAUTION: NEVER hang items over beds.
· Make sure the wall surface is clean and dry. If cleaning is necessary 3M recommends using
isopropyl rubbing alcohol. DO NOT use household cleaners.
· Apply strips to surfaces above 50°F (10°C). Adhesive could lose adhesion above 105°F (40°C).
When removing bracket from wall:
· NEVER pull strip towards you.
· NEVER press bracket against wall.
· ALWAYS hold bracket gently in place to prevent
it from hitting fingers.
· ALWAYS pull tab on Command®Strip SLOWLY
AND STRAIGHT DOWN WALL. Stretch at least 12
inches (30.5 cm) until bracket and strip release.
Purchase medium Command®Refill Strips to reapply to your wall.
®
Hangs with
InstructionsInstructions
Watch a video of these instructions at
www.pollypocket.com/wallparty
NOTE: Video in English only.
TM
6How to Play
7Reattaching & Removal
1. Mounting plates are designed to break
away from the set without causing surface damage.
2. To remove bracket from the wall entirely:
a. NEVER pull strip towards you.
b. Hold bracket gently to prevent it from
snapping fingers. DO NOT press against wall.
c. Grab tab on Command®Strip and
SLOWLY STRETCH STRAIGHT DOWN ALONG
WALL AT LEAST 12 INCHES until bracket and
strip release.
3. Purchase medium Command®Refill Strips to
reapply to your wall.
®
Command®Strips are a product of 3M. For further information visit command.com
NOTE: Apply strips to surfaces above 50°F (10°C).
Adhesive could lose adhesion above 105°F (40°C).
CAUTION:
DO NOT use with wallpaper. May not adhere well to vinyl surfaces.
DO NOT hang items over beds.
3M and Command are trademarks of 3M.
© 3M 2012. All Rights Reserved.
1Assemble the Playset
2Apply Command®Strips
Separate strips. Remove red-printed liner
from one Command®Strip and apply to back
of bracket as shown. Make sure the strip tab
is accessible for future removal.
NOTE: DO NOT PULL BRACKET OFF WALL without reading
removal instructions.
Red Printing = On Bracket
Black Printing = On Wall
3Attach Bracket
Rear View Rear View
Hang Playset on Wall
4
5
1. Attach zip line to playset on wall.
2. Follow Steps 1-3 on the other Wall Party™playset instructions.
3. Attach zip line to other Wall Party™playset.
4. Position other playset to desired location, level against the wall.
5. Press playset firmly onto wall and hold for 30 seconds.
6. Connect all playsets together to create your own Wall Party™!
Connect with other Wall Party™Playsets (sold separately)
CHOKING HAZARD – Small parts.
Not for children under 3 years.
WARNING:
Y6435-0920
©2012 Mattel and/or Origin Products Ltd. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East
Aurora, NY 14052, U.S.A. 1-800-524-8697. Mattel Australia Pty. Ltd., Richmond, Victoria. 3121.
Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 1106, South Tower, World
Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.
(993532-P) Lot 13.5, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel:
03-78803817, Fax: 03-78803867. service.mattel.com
1. Remove black-printed liner from Command®Strip.
2. Position playset level against the wall at a suitable height for your child.
3. Press bracket firmly onto wall and hold for 30 seconds.
NOTE: For optimal adhesion performance, 3M recommends waiting 1 hour before adding weight
to Command®Strips.
Press
firmly for
30
seconds
Keep these instructions for future reference as they contain important information.
Please read all instructions before beginning assembly and set-up.
NOTE: For best results, apply suction cups on smooth area and clean suction cups with water periodically.
Open
for
storage!
INSTRUCTION SHEET
SPECIFICATIONS
Toy:
Toy No.:
Part No.:
Lang. Code:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
PP WL PRTY LWR AST
Y6435
0920
DOM
11.7 " W x8.3" H
5.85 " W x 4.15 " H
2 panel
1
Black
White Offset
70g recycle paper
1 Cover4 Rear
32
Command
Command
Command
Command
Command
Command
Comma
Comm
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Comma
Comm
Command
Command
Command
Command
Command
Command
Command
Command
Reattach in case of detaching.Reattach in case of detaching.
adode la PAREDladode l
ALL sideWALLside
MURCoté
R
aPARED ladode laPARE
L side WALLside WAL
CotéMUR CotéMU
CotéMUR
ladode la PARED lado
D
ide WALLside WALL
CotéMUR
CotéMUR
CotéMUR
ladode la PA
WALLside WALLsi
Comma
S
Command
Str ip
Com
Command
Strips
Command
Strips
Command
Strips
Command
Str ips
d
rips
ma nd
Strips
ommand
Str i
C
omm
C
C
S
t
Comma
S
Command
Str ip
Com
Command
Strips
Command
Strips
Command
Strips
Command
Str ips
d
rips
ma nd
Strips
ommand
Str i
C
omm
C
C
S
t
Comma
S
Command
Str ip
Com
Command
Strips
Command
Strips
Command
Strips
Command
Str ips
d
rips
ma nd
Strips
ommand
Str i
C
omm
C
C
S
t
adode la PAREDladode l
ALL sideWALLside
MURCoté
R
aPARED ladode la PARE
Lside WALL side WAL
CotéMU R CotéMU
CotéMUR
ladode la PARED lado
D
ide WALLside WALL
Coté MUR
CotéMURCotéMUR
ladode la PA
WALLside WALL si
30.5 cm
12"
30.5 cm
12"
Connects to
ALL
Wall Party™
playsets!
You will need:
15 minutes
1’
Approximately
1 foot of open
wall space
Contents:
Before applying Command®Strips:
· CAUTION: NEVER use with wallpaper. May not adhere well to vinyl surfaces.
· CAUTION: NEVER hang items over beds.
· Make sure the wall surface is clean and dry. If cleaning is necessary 3M recommends using
isopropyl rubbing alcohol. DO NOT use household cleaners.
· Apply strips to surfaces above 50°F (10°C). Adhesive could lose adhesion above 105°F (40°C).
When removing bracket from wall:
· NEVER pull strip towards you.
· NEVER press bracket against wall.
· ALWAYS hold bracket gently in place to prevent
it from hitting fingers.
· ALWAYS pull tab on Command®Strip SLOWLY
AND STRAIGHT DOWN WALL. Stretch at least 12
inches (30.5 cm) until bracket and strip release.
Purchase medium Command®Refill Strips to reapply to your wall.
®
Hangs with
InstructionsInstructions
Watch a video of these instructions at
www.pollypocket.com/wallparty
NOTE: Video in English only.
TM
6How to Play
7Reattaching & Removal
1. Mounting plates are designed to break
away from the set without causing surface damage.
2. To remove bracket from the wall entirely:
a. NEVER pull strip towards you.
b. Hold bracket gently to prevent it from
snapping fingers. DO NOT press against wall.
c. Grab tab on Command®Strip and
SLOWLY STRETCH STRAIGHT DOWN ALONG
WALL AT LEAST 12 INCHES until bracket and
strip release.
3. Purchase medium Command®Refill Strips to
reapply to your wall.
®
Command®Strips are a product of 3M. For further information visit command.com
NOTE: Apply strips to surfaces above 50°F (10°C).
Adhesive could lose adhesion above 105°F (40°C).
CAUTION:
DO NOT use with wallpaper. May not adhere well to vinyl surfaces.
DO NOT hang items over beds.
3M and Command are trademarks of 3M.
© 3M 2012. All Rights Reserved.
1Assemble the Playset
2Apply Command®Strips
Separate strips. Remove red-printed liner
from one Command®Strip and apply to back
of bracket as shown. Make sure the strip tab
is accessible for future removal.
NOTE: DO NOT PULL BRACKET OFF WALL without reading
removal instructions.
Red Printing = On Bracket
Black Printing = On Wall
3Attach Bracket
Rear View Rear View
Hang Playset on Wall
4
5
1. Attach zip line to playset on wall.
2. Follow Steps 1-3 on the other Wall Party™playset instructions.
3. Attach zip line to other Wall Party™playset.
4. Position other playset to desired location, level against the wall.
5. Press playset firmly onto wall and hold for 30 seconds.
6. Connect all playsets together to create your own Wall Party™!
Connect with other Wall Party™Playsets (sold separately)
CHOKING HAZARD – Small parts.
Not for children under 3 years.
WARNING:
Y6435-0920
©2012 Mattel and/or Origin Products Ltd. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East
Aurora, NY 14052, U.S.A. 1-800-524-8697. Mattel Australia Pty. Ltd., Richmond, Victoria. 3121.
Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 1106, South Tower, World
Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.
(993532-P) Lot 13.5, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel:
03-78803817, Fax: 03-78803867. service.mattel.com
1. Remove black-printed liner from Command®Strip.
2. Position playset level against the wall at a suitable height for your child.
3. Press bracket firmly onto wall and hold for 30 seconds.
NOTE: For optimal adhesion performance, 3M recommends waiting 1 hour before adding weight
to Command®Strips.
Press
firmly for
30
seconds
Keep these instructions for future reference as they contain important information.
Please read all instructions before beginning assembly and set-up.
NOTE: For best results, apply suction cups on smooth area and clean suction cups with water periodically.
Open
for
storage!
INSTRUCTION SHEET
SPECIFICATIONS
Toy:
Toy No.:
Part No.:
Lang. Code:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
PP WL PRTY LWR AST
Y6435
0920
DOM
11.7 " W x8.3" H
5.85 " W x 4.15 " H
2 panel
1
Black
White Offset
70g recycle paper
1 Cover4 Rear
32
Command
Command
Command
Command
Command
Command
Comma
Comm
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Comma
Comm
Command
Command
Command
Command
Command
Command
Command
Command
Reattach in case of detaching.Reattach in case of detaching.
adode la PAREDladode l
ALL sideWALLside
MURCoté
R
aPARED ladode laPARE
L side WALLside WAL
CotéMUR CotéMU
CotéMUR
ladode la PARED lado
D
ide WALLside WALL
CotéMUR
CotéMUR
CotéMUR
ladode la PA
WALLside WALLsi
Comma
S
Command
Str ip
Com
Command
Strips
Command
Strips
Command
Strips
Command
Str ips
d
rips
ma nd
Strips
ommand
Str i
C
omm
C
C
S
t
Comma
S
Command
Str ip
Com
Command
Strips
Command
Strips
Command
Strips
Command
Str ips
d
rips
ma nd
Strips
ommand
Str i
C
omm
C
C
S
t
Comma
S
Command
Str ip
Com
Command
Strips
Command
Strips
Command
Strips
Command
Str ips
d
rips
ma nd
Strips
ommand
Str i
C
omm
C
C
S
t
adode la PAREDladode l
ALL sideWALLside
MURCoté
R
aPARED ladode la PARE
Lside WALL side WAL
CotéMU R CotéMU
CotéMUR
ladode la PARED lado
D
ide WALLside WALL
Coté MUR
CotéMURCotéMUR
ladode la PA
WALLside WALL si
30.5 cm
12"
30.5 cm
12"
Connects to
ALL
Wall Party™
playsets!
You will need:
15 minutes
1’
Approximately
1 foot of open
wall space
Contents:
Before applying Command®Strips:
· CAUTION: NEVER use with wallpaper. May not adhere well to vinyl surfaces.
· CAUTION: NEVER hang items over beds.
· Make sure the wall surface is clean and dry. If cleaning is necessary 3M recommends using
isopropyl rubbing alcohol. DO NOT use household cleaners.
· Apply strips to surfaces above 50°F (10°C). Adhesive could lose adhesion above 105°F (40°C).
When removing bracket from wall:
· NEVER pull strip towards you.
· NEVER press bracket against wall.
· ALWAYS hold bracket gently in place to prevent
it from hitting fingers.
· ALWAYS pull tab on Command®Strip SLOWLY
AND STRAIGHT DOWN WALL. Stretch at least 12
inches (30.5 cm) until bracket and strip release.
Purchase medium Command®Refill Strips to reapply to your wall.
®
Hangs with
InstructionsInstructions
Watch a video of these instructions at
www.pollypocket.com/wallparty
NOTE: Video in English only.
TM
6How to Play
7Reattaching & Removal
1. Mounting plates are designed to break
away from the set without causing surface damage.
2. To remove bracket from the wall entirely:
a. NEVER pull strip towards you.
b. Hold bracket gently to prevent it from
snapping fingers. DO NOT press against wall.
c. Grab tab on Command®Strip and
SLOWLY STRETCH STRAIGHT DOWN ALONG
WALL AT LEAST 12 INCHES until bracket and
strip release.
3. Purchase medium Command®Refill Strips to
reapply to your wall.
®
Command®Strips are a product of 3M. For further information visit command.com
NOTE: Apply strips to surfaces above 50°F (10°C).
Adhesive could lose adhesion above 105°F (40°C).
CAUTION:
DO NOT use with wallpaper. May not adhere well to vinyl surfaces.
DO NOT hang items over beds.
3M and Command are trademarks of 3M.
© 3M 2012. All Rights Reserved.
1Assemble the Playset
2Apply Command®Strips
Separate strips. Remove red-printed liner
from one Command®Strip and apply to back
of bracket as shown. Make sure the strip tab
is accessible for future removal.
NOTE: DO NOT PULL BRACKET OFF WALL without reading
removal instructions.
Red Printing = On Bracket
Black Printing = On Wall
3Attach Bracket
Rear View Rear View
Hang Playset on Wall
4
5
1. Attach zip line to playset on wall.
2. Follow Steps 1-3 on the other Wall Party™playset instructions.
3. Attach zip line to other Wall Party™playset.
4. Position other playset to desired location, level against the wall.
5. Press playset firmly onto wall and hold for 30 seconds.
6. Connect all playsets together to create your own Wall Party™!
Connect with other Wall Party™Playsets (sold separately)
CHOKING HAZARD – Small parts.
Not for children under 3 years.
WARNING:
Y6435-0920
©2012 Mattel and/or Origin Products Ltd. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East
Aurora, NY 14052, U.S.A. 1-800-524-8697. Mattel Australia Pty. Ltd., Richmond, Victoria. 3121.
Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 1106, South Tower, World
Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.
(993532-P) Lot 13.5, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel:
03-78803817, Fax: 03-78803867. service.mattel.com
1. Remove black-printed liner from Command®Strip.
2. Position playset level against the wall at a suitable height for your child.
3. Press bracket firmly onto wall and hold for 30 seconds.
NOTE: For optimal adhesion performance, 3M recommends waiting 1 hour before adding weight
to Command®Strips.
Press
firmly for
30
seconds
Keep these instructions for future reference as they contain important information.
Please read all instructions before beginning assembly and set-up.
NOTE: For best results, apply suction cups on smooth area and clean suction cups with water periodically.
Open
for
storage!
INSTRUCTION SHEET
SPECIFICATIONS
Toy:
Toy No.:
Part No.:
Lang. Code:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
PP WL PRTY LWR AST
Y6435
0920
DOM
11.7 " W x8.3" H
5.85 " W x 4.15 " H
2 panel
1
Black
White Offset
70g recycle paper
1 Cover4 Rear
32
Command
Command
Command
Command
Command
Command
Comma
Comm
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Comma
Comm
Command
Command
Command
Command
Command
Command
Command
Command
Reattach in case of detaching.Reattach in case of detaching.
adode la PAREDladode l
ALL sideWALLside
MURCoté
R
aPARED ladode laPARE
L side WALLside WAL
CotéMUR CotéMU
CotéMUR
ladode la PARED lado
D
ide WALLside WALL
CotéMUR
CotéMUR
CotéMUR
ladode la PA
WALLside WALLsi
Comma
S
Command
Str ip
Com
Command
Strips
Command
Strips
Command
Strips
Command
Str ips
d
rips
ma nd
Strips
ommand
Str i
C
omm
C
C
S
t
Comma
S
Command
Str ip
Com
Command
Strips
Command
Strips
Command
Strips
Command
Str ips
d
rips
ma nd
Strips
ommand
Str i
C
omm
C
C
S
t
Comma
S
Command
Str ip
Com
Command
Strips
Command
Strips
Command
Strips
Command
Str ips
d
rips
ma nd
Strips
ommand
Str i
C
omm
C
C
S
t
adode la PAREDladode l
ALL sideWALLside
MURCoté
R
aPARED ladode la PARE
Lside WALL side WAL
CotéMU R CotéMU
CotéMUR
ladode la PARED lado
D
ide WALLside WALL
Coté MUR
CotéMURCotéMUR
ladode la PA
WALLside WALL si
30.5 cm
12"
30.5 cm
12"
Connects to
ALL
Wall Party™
playsets!
Table of contents
Other Mattel Toy manuals
Mattel
Mattel MATCHBOX BIG RIG BUDDIES SCRAP YARD... User manual
Mattel
Mattel Barbie M8608-0920G2 User manual
Mattel
Mattel Barbie J0505-0520 User manual
Mattel
Mattel Barbie CHG34 User manual
Mattel
Mattel Pound Puppies User manual
Mattel
Mattel Barbie K9271-0920 User manual
Mattel
Mattel BOOMco DYNAMAG User manual
Mattel
Mattel Hot Wheels FLYING CUSTOMS User manual
Mattel
Mattel Monster High User manual
Mattel
Mattel Hot Wheels TRACK BUILDER System User manual
Mattel
Mattel Barbie N8412-0520 User manual
Mattel
Mattel PIXEL CHIX H8330 User manual
Mattel
Mattel Disney PIXAR Cars 3 User manual
Mattel
Mattel FLUSHIN FRENZY User manual
Mattel
Mattel Y0973 User manual
Mattel
Mattel HotWheels Ultimate Garage User manual
Mattel
Mattel W5749 User manual
Mattel
Mattel Barbie BDB32-0526 User manual
Mattel
Mattel Mega Construx Despicable Me DYG41 User manual
Mattel
Mattel Hot Wheels DWK99 User manual
