Maytronics Dolphin Liberty 200 User manual

Robotic Pool Cleaner LIBERTY
LIBERTY 200 | 300 User Instructions
8151995
EN

2Robotic Pool Cleaner LIBERTY |User Instructions
Robotic Pool Cleaner LIBERTY 200 | 300
User Instructions
EN
Contents
1. Pool cleaner parts.......................................................................................................................................................... 3
2. Specifications................................................................................................................................................................... 3
2.1 Robot ........................................................................................................................................................................ 3
2.2 Water conditions................................................................................................................................................... 3
3. Features and indications ........................................................................................................................................... 4
4. Charging recommendations...................................................................................................................................... 4
5. Removing the robot out of the pool using click-upTM (for LIBERTY 300) ................................................... 5
5.1 Removing the robot out of the pool using grab hook (for LIBERTY 200) ............................................ 5
6. Cleaning the filter basket............................................................................................................................................ 6
7. Periodic cleaning - recommended at least once a month........................................................................... 7
8. Troubleshooting ............................................................................................................................................................. 8
9. Off-season storage....................................................................................................................................................... 9
10. Warnings and cautions................................................................................................................................................ 9
10.1 Warnings ................................................................................................................................................................ 9
10.2 Cautions ................................................................................................................................................................. 9

3Robotic Pool Cleaner LIBERTY |User Instructions
Robotic Pool Cleaner LIBERTY 200/300
User Instructions
1. POOL CLEANER PARTS
2. SPECIFICATIONS
2.1 Robot
Water temperature range: 6°C-35°C / 43°F-95°F
Water depth range: 0.4m-2.5m / 1.33ft-8.2ft
Motor protection: IP 68
Chlorine - 4 ppm, Max.
2.2 Water Conditions
Use only the robotic pool cleaner in the following water conditions:
• Chlorine: 4 ppm max. • pH: 7.0 – 7.8 • Temperature: 6°C – 35°C / 43°F – 95°F
• NaCl: 5000 ppm max.
pH - 7.0-7.8
NaCl - 5000 ppm, Max.
Battery Lithium-ion | 5,000mAh | 25.2V@5Ah / 126Wh
Charger protection: IP 54
Power button Inductive charger
connection
Battery indicators
Settings and
status indicator
Grab hookFilter basketExtra filter pannels* Clicker* Charger
* For LIBERTY 300

4Robotic Pool Cleaner LIBERTY |User Instructions
3. FEATURES AND INDICATIONS
Error
In case of error notification, please refer to troubleshooting.
or contact customer care - www.maytronics.com
Temperature Warning
In case of temperature warning notification, place and charge the pool cleaner in
a protected and shaded area, at a temperature range of 6°C - 35°C / 43°F - 95°F.
Eco Mode -LIBERTY 300
Use Eco Mode to keep your pool floor clean for a week on one charge.
The robot will automaticly clean the pool floor for up to 30 min,
3 times a week, with 48 hours between cleaning cycles.
1. Press ON to activate until LED lights up.
2. Press ON again for 6 seconds until the purple LED light turns green.
Place the robot in the pool, and within 30 sec, it will start working.
Cycle Selector -LIBERTY 300
Use Cycle Selector to customize cleaning mode to “Floor only”:
1. Press ON to activate until the LED lights up.
2. Press ON again for 3 seconds until the purple LED blinks 3 times.
Place the robot in the pool, and within 30 sec, it will start cleaning the pool floor.
After cleaning cycle (90 minutes each cycle), the robot will return to default “Floor
and Walls” mode.
Step 1 Step 2 Step 1 Step 2 Step 3
4. CHARGING RECOMMENDATIONS
• When the battery is low and all indicators are off - the cleaner is on standby mode. Connect to charger
to wake it up.
• Always Charge the pool cleaner in a protected and shaded area at a temperature range of
6°C - 35°C / 43°F - 95°F, until you see 3 green bars in the battery indicator panel (up to 6 hours).
• Make sure that the charger surface and power unit surface are clean, and there is no object between the robot
and the charger.

5Robotic Pool Cleaner LIBERTY |User Instructions
5. REMOVING THE ROBOT OUT OF THE POOL USING CLICK-UPTM (for LIBERTY 300)
2 31
2 31
• After finishing its cleaning cycle, the robot will stop next to a random wall, so you will be able to pick it up with the
grab-hook.
1. Place the black capsule of the
clicker, in the water.
2. Make sure the clicker is no
more than 8 m/26 ft away from
the robot.
3. Shake the clicker for at least 3
seconds.
• Standard pole.
Not included.
After a few seconds the robot
will climb to the waterline and
will wait there for 60 seconds
to be collected.
Take the robot easily out of
the water.
• The robot will climb the nearest wall, and will wait for 60 seconds on the waterline.
• If you can't reach this wall, wait for the robot to move to another wall. Shake the clicker and the robot will climb to
the waterline.
5.1 Removing The Robot Out Of The Pool Using Grab Hook (for LIBERTY 200)

6Robotic Pool Cleaner LIBERTY |User Instructions
It is highly recommended to clean the filter basket after each cleaning cycle.
Note: Do not let the filter basket dry out before cleaning.
Open the filter cover. Upon opening the filter cover, the handle will lift
independently.
Lift up the basket. Open the latch to release the
bottom lid in order to remove
the debris.
Clean the filter basket with a hose.
6. CLEANING THE FILTER BASKET
Cleaning after use - removing and cleaning the filter basket

7Robotic Pool Cleaner LIBERTY |User Instructions
Dismantle the 2 ultra-fine filter panels of the basket, according to the following steps:
Insert the clean filter basket and close the
filter cover.
Clean the filter panels with a hose.
Assemble the filter panels .
Dismantle the 2 panels using your thumbs.
7. PERIODIC CLEANING  RECOMMENDED AT LEAST ONCE A MONTH

8Robotic Pool Cleaner LIBERTY |User Instructions
Main Symptom Additional Symptoms Troubleshooting Steps - Customer
The robot doesn't
charge
Robot's Battery LEDs are blinking
in a special pattern (central LED
- then right and left LEDs). The
issue occurred while the robot was
connected to the charger
1. In case the robot feels hot to the touch: charge the robot
in a shaded location or when the temperature is low, for
example: overnight / indoors.
2. In case the robot feels cold to the touch: try charging the
robot in a warmer location.
The Power Unit doesn't show any
LEDs at all
Try connecting the charger to a different power outlet.
Make sure that the charger LED is on.
The Power Button LED is red
1. Try disconnecting the charger from the Power Unit and
connecting it back a few times.
2. Check whether an object is blocking the connection
between the charger and the Power Unit.
The charging process stops, and
the Power Button LED is blinking
red for a short period of time
1. Make sure that the charger is connected properly.
2. Check whether an object is blocking the connection
between the charger and the Power Unit.
Charging progress is stuck: one of
the battery LEDs is blinking and
doesn't switch to the steady light
after a long period of time
1. Check that the charger LED turns on.
2. Make sure that the charger is connected properly.
3. Check whether an object is blocking the connection between
the charger and the Power Unit.
4. Charge overnight in a cooler location.
The battery is not full
after charging
The robot's battery discharges while
the robot is turned off
Fully charge the robot (until all battery LEDs are steady green),
make sure that the robot is turned off. Do not start the
cleaning process. Check the battery status after 2 days.
If the battery charge level is significantly lower - contact
Customer Care.
Red LED light appears
above the power button
Make sure there's nothing stuck in the tracks or brushes.
Clean the filter and make sure it's not clogged.
Disconnect and reconnect the charger 3 times.
The robot will not start
the cleaning cycle. The
Power Button LED is red
The charging process works
properly
The robot finishes a 90-minute
cleaning cycle
During the Eco mode and Cycle
Selector, the robot will climb the
walls even if configured otherwise
The robot will not respond to
Click-Up
TM
properly - will start the
cleaning cycle instead of waiting at
the wateline
Contact Customer Care: [e-mail]
The charger is connected to the
robot
Disconnect the charger and press on the robot's power button
to operate.
The charger is disconnected from
the robot. The charging process
works properly
Contact Customer Care: [e-mail]
8. TROUBLESHOOTING

9Robotic Pool Cleaner LIBERTY |User Instructions
Before o-season or storing the robot during the winter - we recommend charging the battery at least
50% (2 green bars in the battery indicator panel).
Recommended storage temperature range: -10°C - 40°C / 14°F - 104°F.
After o-season storage, charge the robot to its fullest.
9. OFF-SEASON STORAGE
10.1 Warnings
• Remove the robotic pool cleaner from the pool before allowing people to enter the pool.
• When examining the robotic pool cleaner, make sure the robotic pool cleaner is switched OFF.
• Charge the battery only in the temperature range between 6°C to 35°C / 43°F to 95°F
• Keep the robotic pool cleaner out of the reach of children or persons with reduced physical, sensory, or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction. Cleaning and maintenance shall not be made by children.
• Use only the original battery charger.
• The battery charger must be supplied through a residual current device (RCD) having a rated residual
operating current not exceeding 30mA.
• The power cord is not user-replaceable. If the power cord is damaged, stop using the battery charger
and contact the service center for repair. Do not use extension cord to connect the battery charger to
electric supply; provide a properly located outlet.
• DO NOT USE the robotic pool cleaner and/or its battery / power pack in case of mechanical damage to
the robotic pool cleaner and/or its battery.
• To avoid the risk of fire and burns, DO NOT open, crush, heat, or burn the battery case.
10.2 Cautions
• Keep hands and fingers away from impeller motor area and driving belt mechanism to avoid injury.
• Position the battery charger at least 3.5 m / 12 ft from pool edge during operation.
• For continuous protection against possible electric shock, place the battery charger at least 11 cm / 4 in
above ground.
• When lifting the robotic pool cleaner, take care to prevent back injury.
• Do not use the robotic pool cleaner if you have added liquid flocculant or any other clarifier to the pool
water. These substances obstruct and damage the robot filters.
• The Lithium-Ion battery in this product is non-replaceable. It should be recycled at certified battery
electronics recyclers that accept batteries. Batteries should NOT be discarded in the trash or put in
municipal recycling bins. Do not disassemble the battery.
10. WARNINGS AND CAUTIONS
CAUTION
CAUTION
Australia, NZ, South Africa
1 300 693 657
[e-mail]
Rest of the world / Maytronics HQ
00 800 69694141 (toll free number)
00 972 77 96 14 204 (international call)
[e-mail]
Contact us
North America
US 1-888-365-7446
Canada 1-855-634-8572
customersuppor[email protected]
France
[phone]
[e-mail]