MDB Family 3 Drawer Changer 5555 Installation and operating instructions

3 Drawer Changer (5555) - Assembly and Operation Manual
Congratulations on purchasing an MDB Family product. This product will provide many years of service
if you adhere to the following guidelines for assembly, maintenance and operation. This product is for
residential use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for
assembling the product in addition to the Allen wrench included in the hardware box. Do not use power
screwdrivers. All of our products are made from natural woods. Please understand that natural woods
have color variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD-
WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLIS-
TIC VARIATIONS.
revised 17OCT2012 page 1
!!PLEASE READ!!
Assembly of this furniture is easier with two people. Assemble furniture on debris free carpets or on the enclosed
foam sheets to prevent scratching of finish. Using any power tools to assemble this furniture may potentially strip
the wood. DO NOT OVERTIGHTEN SCREWS. DO NOT USE THE CHANGING TABLE IF IT IS DAMAGED OR
BROKEN.
WARNING!
!
READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TABLE, ADD-ON
CHANGING UNIT, OR CONTOURED CHANGING PAD.

PARTS
HARDWARE
page 2
Tools required: Phillips screwdriver, Flat-head screwdriver.

(Step 1) Installing the Foots and Rail Glides
- Close-up of rail H11 installed onto panel B.
Install the rail glides (H11) and (H12)
onto the end panels (A) and (B).Use
3 wood screws (H7) for each glide.
DO NOT OVERTIGHTEN.
(Step 2) Insert Nylon Dowels H6 into the rails
and bars.
(D) Top Round Bar X 2
(F) Top Front Panel Rail
(E) Top Back Panel Rail
(G) Mid-Support Rail X 4
(H6) Nylon
Dowel
(Step 3) Installing the Wood Rails
-Attach the wood rails to the end panel as shown.
Assembly is much easier with two people.
(D) (E)
(D)
(G)
(G)
(G)
(G)
(F)
(H2)
(H2)
(H1)
(H1)
(H5) (H5)
(A)
H
H16
I
H15 - Close-up of installing the foot.
page 3

(L)
(L)
Wood
Dowel
Wood
Dowel
(Step 4) Installing the Shelf and Back Panel.
Make sure
unfinished
side is
facing down
(C)
(J)
(Step 5) Installing the
Right End.
(H1)
(H1)
(H2)
(H2)
(H5)
(H5)
(L)
(L)
page 4

(SS1)
(SS2)
(D4)
(SS3)
BabyMod.

page 6
To prevent death or
serious injury, always
keep child within arm’s
reach. Never leave child
unattended and always
use restraining system.
ONE YEAR LIMITED WARRANTY:
We will replace any missing parts at the time
of purchase or any defective item within a
one year period from the date of original
purchase. Please keep your receipt so that
we may process your warranty request. This
warranty only covers new units with original
packaging and ownership, and is not trans-
ferable. It does not cover any used, second-
hand or demo models.
This warranty does not cover any damaged
or defective parts that result from installation
and assembly, normal wear and tear, abuse,
negligence, improper use or alteration to the
finish, design, and hardware. The specific
legal rights of this warranty may vary from
state to state. Some states do not allow any
exclusion or limitation of incidental damag-
es. Some states do not allow limitation on
how long an implied warranty lasts.
WARNING!
FALL HAZARD
TO PREVENT DEATH OR SERIOUS
INJURY, ALWAYS KEEP CHILD WITHIN
ARM’S REACH.
WARNING:
Read all instructions before use of the changing table.•
Do not use changing table if it is damaged or broken.•
This product is not intended to be used as a changing•
table without adult supervision. Use of the product
without this may result in death or serious injury to your
child from falling. Follow all instructions on attaching
and using the changing table.
Only use the pad provided by MDB FAMILY .•
The maximum weight of the child for which the chang-•
ing table is intended is 30 lbs.
Stop using this changing table when the child is able to•
sit up or roll over.
As with all infant and baby furniture, it is important to•
check fasteners, screws, and bolts periodically for tight-
ness. Parents should ensure a safe environment for
their child by checking the furniture regularly before
placing the child in the product.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING THIS
PRODUCT. KEEP THE MANUAL FOR FUTURE USE.
WARNING!
FALL HAZARD
When using this product, always secure the child with•
the safety strip.
Registering your product is even easier than
before. You can register your product on our
website at : www.themdbfamily.com
IF YOU WOULD LIKE TO ORDER
REPLACEMENT OR MISSING PARTS
PLEASE VISIT US AT:
WWW.THEMDBFAMILY.COM
OR YOU CAN CONTACT US BY MAIL:
MDB FAMILY
855 WASHINGTON BLVD.
MONTEBELLO, CA 90640
Storage:
Pine woods exchange moisture with the air adjust-
ing to major changes in room temperature and
humidity. Therefore, it is best to place your furniture
away from heating or air-conditioning vents.
Sunlight is not friendly to solid wood furniture and
prolonged direct exposure to harsh sunlight can
discolor the finish. Be careful not to place your furni-
ture in direct sunlight for extended periods of time. As
with all your fine furniture, blot up spills immediately.
•
•
Care and Cleaning:
Do not scratch or chip the finish. Do not use abra-
sive chemicals for cleaning. Clean with mild soap on
a soft rag. Rinse and dry thoroughly. If you ever
refinish this furniture, be sure to use only a non-toxic
finish specified for children’s products. If you choose
to refinish this furniture, the warranty will be voided.
•

page 7
Restraint System
Step 1. Step 2.
Remove the dirty diaper from the baby.
Step 3. Step 4.
Reattach the new diaper to a clean and happy
baby!
WARNING:
During the diaper changing process, be sure always to keep one hand on the baby to prevent the
baby from falling off the changing pad. Falling from the changing pad could cause severe injury or
even death to the baby.
Place a baby on the pad with his/her bottom on the
top of the diaper. Safely secure the baby on the pad
with the safety straps and buckle on the pad. This
helps prevent the baby from falling off the pad, which
can result in severe injury or even death of the baby.
Push the baby’s legs forward and create a cavity
under the baby’s bottom. Clean the baby.

!!! IMPORTANT !!! Furniture Anti-Tipping Kit Installation
Children may be injured by tipping furniture and the use of the anti-tipping kit is highly recommended. This device,
when properly installed, could provide protection against unexpected tipping of furniture due to improper use.
!!WARNING!! THIS DEVICE IS NOT A SUBSTITUTE FOR
ADULT SUPERVISION.
Safety Notes:
• Do not allow your children to climb or jump on the furniture or in the drawer. Climbing on the furniture could make
it top-heavy and cause the furniture to damage or tip over.
• Never move or push heavy furniture by yourself as it can cause the furniture to tip over.
• This furniture is not intended to support TV or other heavy items.
• Do not overload the drawers.
HARDWARE
ASSEMBLY INSTRUCTIONS
(not included)
Phillips
screwdriver
Tools Needed
D. Plastic anchor
E. Strap
B. Longer screw
A. Shorter screw
C. Washer (2)
1 2
3/16”
2”
2.1 2.2
D
revised 280912
3 4
A
C
E
C
B
E
page 8