MDB Family 6831 Installation and operating instructions

revised 27DEC2012 page 1
Congratulations on purchasing an MDB Family product. This product will provide many years of service if
you adhere to the following guidelines for assembly, maintenance, and operation. This product is for
residential use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling
the product in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers. All
of our products are made from natural woods. Please understand that natural woods have color variations
which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND
HARDWARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO
STYLISTIC VARIATIONS.
!!PLEASE READ!
Assembly of this furniture is easier with two people. Assemble furniture on debris free carpets or on the
enclosed foam sheets to prevent scratching of finish. Using any power tools to assemble this furniture
may potentially strip the wood. DO NOT OVERTIGHTEN SCREWS. DO NOT USE THE CHANGING
TABLE IF IT IS DAMAGED OR BROKEN.
WARNING!
!
READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TABLE, ADD-ON
CHANGING UNIT, OR CONTOURED CHANGING PAD.
Crib Changer Set (6831) - Assembly and Operation Manual

HARDWARE
H1. 2" Allen Head
Bolt (16)
H5. Allen
Wrench
H4. Lock
Washer (16)
H2. 1" Metal
Dowel (16)
H3. Wood
Screw (2)
H6. Safety Strap
A. Side Panel (2)
B. Support Bar (3)
E. Shelf
Board (3)
F. Changing
Pad
C. Top Rail (2)
D. Side Rail (6)
page 2
CHANGER PARTS
CHANGER
Unpacked and separated all parts, bolts and screws. All holes for attachment, including the ones
for an optional drawer, have been pre-drilled. No drilling by the customer is necessary. Ask your
store or call us for replacement of missing part. We continue to improve our product and may make
minor changes to the design. These changes may not be reflected in the instructions.
Tools Needed
(not included)
Phillips
screwdriver
Pencil

STEP 1.
Attach support bars (B), top rails (C) and
side rails (D) to one of the side panels
(A) using 2" Allen head bolts (H1), lock
washers (H4) and metal dowels (H2) as
illustrated.
Use the Allen wrench (H5) to tighten the
bolts securely.
DO NOT OVERTIGHTEN.
* Make sure the groove at each rail
faces the inside of the unit.
STEP 2.
Slide in shelf boards (E) in to the grooves
of side rails (D).
E
E
E
E. Shelf
Board
D
D
D
D
D
D
D. Side
Rail
page 3
C
D
D
D
D
D
D
C
A. Side Panel
B
B
B
H1
H1
H1
H1
H1
H1
H1 H1
H4
H4
H4
H4
H4
H4 H4
H4
H2
H2
H2
H2
H2
H2
H2
H2

STEP 3.
Attach the other side panel (A) to the
changer assembly using 2" Allen head
bolts (H1), lock washers (H4) and metal
dowels (H2) as illustrated.
Use the Allen wrench (H5) to tighten the
bolts securely.
STEP 4.
Attach safety strap (H6) to the side rails
(D) using two wood screws (H3).
H6. Safety
Strap
H3
H3
A. Side Panel
H2
H1
H4
H2
H1
H4
H1
H4
H1
H4
H1
H4
H2
H2
H2
H2
H2
H2
H1
H4
H1
H4
H1
H4
DO NOT OVERTIGHTEN.
page 4

KEEP THIS MANUAL IN A SAFE
PLACE FOR FUTURE REFERENCE.
The recommended maximum weight of
the occupant is 30 lbs on changing table.
Adjust the safety strap (H6) and test the locking mecha-
nism. Slide the male connector into the female connec-
tor until they lock together. Press the side tabs on the
male connector to release. Make sure the safety strap
(H6) goes over the pad. Recheck all connections and
your changer is ready to use.
STEP 5.
Place the changer pad (F) onto the changer.
STEP 6.
F. Changing
Pad
page 5

page 6
7C
Children may be injured by tipping furniture and the use of the
anti-tipping kit is highly recommended. This device, when
properly installed, could provide protection against unexpected
tipping of furniture due to improper use.
WARNING
Place heaviest item in the lowest drawers.
do not set TVs or other heavy objects on
top of this product.
Never allow children to climb or hang on
drawers, doors, or shelves.
Never open more than one drawer at a time.
(OR)
Do not defeat or remove the drawer interlock
system.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
This is permanent label. Do not attempt to remove!
Unless specifically designed to accommodate,
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent
tip-over:
Furniture anti-tipping kit installation.
STEP 7.
7A
7D 7E
7B
3/16”
2”
7C.1
7C.2
Short
screw
Long
screw
X 2X 1
X 2X 1
X 1
X 1

To prevent death or
serious injury, always
keep child within arm’s
reach. Never leave child
unattended and always
use restraining system.
Registering your product is even easier than
before. You can register your product on our
website at : www.themdbfamily.com
IF YOU WOULD LIKE TO ORDER
REPLACEMENT OR MISSING PARTS
PLEASE VISIT US AT:
WWW.THEMDBFAMILY.COM
OR YOU CAN CONTACT US BY MAIL:
MDB FAMILY
855 WASHINGTON BLVD.
MONTEBELLO, CA 90640
ONE YEAR LIMITED WARRANTY:
We will replace any missing parts at the
time of purchase or any defective item
within a one year period from the date of
original purchase. Please keep your receipt
so that we may process your warranty
request. This warranty only covers new
units with original packaging and owner-
ship, and is not transferable. It does not
cover any used, secondhand or demo
models.
This warranty does not cover any damaged
or defective parts that result from installa-
tion and assembly, normal wear and tear,
abuse, negligence, improper use or altera-
tion to the finish, design, and hardware of
the crib. The specific legal rights of this
warranty may vary from state to state.
Some states do not allow any exclusion or
limitation of incidental damages. Some
States do not allow limitation on how long
an implied warranty lasts.
WARNING!
FALL HAZARD
TO PREVENT DEATH OR SERIOUS
INJURY, ALWAYS KEEP CHILD WITHIN
ARM’S REACH.
WARNING:
Read all instructions before use of the changing table.•
Do not use changing table if it is damaged or broken.•
This product is not intended to be used as a changing•
table without adult supervision. Use of the product
without this may result in death or serious injury to your
child from falling. Follow all instructions on attaching
and using the changing table.
Only use the pad provided by MDB FAMILY.•
The maximum weight of the child for which the chang-•
ing table is intended is 30 lbs.
Stop using this changing table when the child is able to•
sit up or roll over.
As with all infant and baby furniture, it is important to•
check fasteners, screws, and bolts periodically for tight-
ness. Parents should ensure a safe environment for
their child by checking the furtniture regularly before
placing the child in the product.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING THIS
PRODUCT. KEEP THE MANUAL FOR FUTURE USE.
WARNING!
FALL HAZARD
When using this product, always secure the child with•
the safety strip.
Maintenance and Cleaning:
Do not scratch or chip the finish. Do not use
abrasive chemicals for cleaning. Clean with mild
soap on a soft rag. Rinse and dry thoroughly. If
you ever refinish this furniture, be sure to use
only a non-toxic finish specified for children’ s
products. If you choose to refinish this furniture,
the warranty will be voided.
Storage:
Pine woods exchange moisture with the air
adjusting to major changes in room temperature
and humidity. Therefore it is best to place your
furniture away from heating or air-conditioning
vents. Sunlight is not friendly to solid wood
furniture and prolonged direct exposure to harsh
sunlight can discolor the finish. Be careful not to
place your furniture in direct sunlight for extended
periods of time. As with all your fine furniture,
blot up spills immediately.

Restraint System
Step 1.
Place a baby on the pad with his/her bottom on the
top of the diaper. Safely secure the baby on the pad
with the safety straps and buckle on the pad. This
helps prevent the baby from falling off the pad,
which can result in severe injury or even death of
the baby.
Step 2.
Remove the dirty diaper from the baby.
Step 3.
Push the baby’s legs forward and create a cavity
under the baby’s bottom. Clean the baby.
Step 4.
Reattach the new diaper to a clean and happy
baby!
During the diaper changing process, be sure always to keep one hand on the baby to prevent the baby from falling off the
changing pad. Falling from the changing pad could cause severe injury or even death to the baby.
WARNING:
page 8

DRESSER PARTS
DRESSER
page 9
H. Left Side Panel J. Right Side Panel
G. Dresser Top
K. Drawer Front Panel (3)
L. Drawer Back Panel (3)
M. Drawer Right
Panel (3)
N. Drawer Left
Panel (3)
P. Drawer Back Board (3)
Q. Drawer Support Bar (3)
S. Dresser Top Support Bar
T. Dresser Support Bar (3)
HARDWARE
H7. 2" Allen Head
Bolt (14)
H9. 1" Metal
Dowel (8) H10. Knob (6)
H8. 1-1/2" Allen Head
Bolt (4)
U. Dresser Back Top Panel
V. Dresser Back Bottom Panel

page 10
H13. Cam Bolt (12) H14. Cam Lock (12)H12. 1-1/4” Wood
Screw (12)
H15. Lock
Washer (18) H18. Allen wrench
H11. 1-1/4” Bolt
for Knob (6)
H17. 1/2” Small Wood
Screw for Glides (36)
H19. Right Panel Glide (3) H20. Right Drawer Glide (3)
H21. Left Panel Glide (3) H22. Left Drawer Glide (3)
Attach panel glides (H21, H19) to left side
panel (H) and right side panel (J) using
1/2” Small Wood (H17)
as illustrated.
STEP 1.
H. Left Side Panel J. Right Side Panel
H21
H21
H21
H19
H19
H19
H17
H17
H19 / H21
Panel Glide
Tools Needed
(not included)
Phillips
screwdriver
Pencil
H23. Curve
washer (2)

page 11
Attach dresser top support bar (S),
dresser support bars (T), dresser
back top panel (U) and dresser back
bottom panel (V) to the left side panel
(H) using 2" Allen head bolts (H7),
lock washers (H15) and metal dowels
(H9) as illustrated.
Use the Allen wrench (H18) to tighten
the bolts securely.
STEP 2.
Attach right side panel (J) to the
dresser assembly using 2" Allen head
bolts (H7), lock washers (H15) and
metal dowels (H9) as illustrated.
Use the Allen wrench (H18) to tighten
the bolts securely.
STEP 3.
H7
H7
H1
H15
H. Left Side Panel
H9
H15
H7
H9
H15
H7
H9
H7
H9
H15
H7
H15
U
T
S
T
T
H15
H15
DO NOT OVERTIGHTEN.
DO NOT OVERTIGHTEN.
V
J. Right Side
Panel
H7
H15
H9
H7
H9
H7
H9
H7
H9
H7
H15
H7
H15
H7
H15
H15
H15
H15

page 12
Place the dresser top (G) to the top of
dresser assembly. Secure the dresser top
(G) using 1-1/2" Allen head bolts (H8), lock
washers (H15) and curve washers (H23)
as illustrated.
STEP 4.
DO NOT OVERTIGHTEN.
H15
H8
G. Dresser Top
H8
H23
H15
H15
H8
H15
H8
H8
H15

page 13
Assemble all drawers as the steps
illustrated below.
STEP 5.
K. Drawer
Front Panel
L. Drawer
Back Panel
M. Drawer
Right
Panel
N. Drawer
Left
Panel
P. Drawer
Back Board
Q. Drawer
Support
Bar
H12
H12
H13
H14
H13
H14
H14
H13
Rotate H14
to secure.
5A
5B
5C

page 14
KEEP THIS MANUAL IN A SAFE
PLACE FOR FUTURE REFERENCE.
Slide all drawers to the dresser and the
dresser is ready to use.
STEP 6.
5D
5E
H17
H17
H17
H17
H17
H17
H22. Left Drawer Glide
H20. Right
Drawer Glide
H10. Knob
H11
H11
H10. Knob

page 15
3/16”
2”
7C.1
7C.2
7C
Children may be injured by tipping furniture and the use of the
anti-tipping kit is highly recommended. This device, when
properly installed, could provide protection against unexpected
tipping of furniture due to improper use.
WARNING
Place heaviest item in the lowest drawers.
do not set TVs or other heavy objects on
top of this product.
Never allow children to climb or hang on
drawers, doors, or shelves.
Never open more than one drawer at a time.
(OR)
Do not defeat or remove the drawer interlock
system.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
This is permanent label. Do not attempt to remove!
Unless specifically designed to accommodate,
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent
tip-over:
Furniture anti-tipping kit installation.
STEP 7.
7A 7B
7D 7E
X 2X 1
X 2X 1
X 1
X 1
Short
screw
Long
screw