Medela Freestyle 27260 User manual

Freestyle®
EN Instructions |FR Instructions
#27260
ALWAYS
BPA-free
TOUJOURS
sans-BPA

Thank you for choosing the Freestyle Breastpump. Breastmilk is the natural choice
for your baby, but there are reasons and situations where breastfeeding is not
possible. For over 50 years, it has been Medela’s conviction that these mothers
and babies can be supported. In close co-operation with breastfeeding experts,
Medela, one of the market leaders, has researched and developed breastpumps
that perfectly meet breastfeeding mothers needs. For mothers who insist on the
best for their babies and themselves. Because you care.
Medela vous remercie d’avoir acheté un tire-lait Freestyle. Le lait maternel est le
meilleur aliment pour votre enfant, mais il existe de nombreuses raisons et
circonstances pour lesquelles l’allaite-ment au sein n’est pas possible. Depuis plus
de 50 ans, l’objectif de Medela, un des leaders sur le marché des tire-laits et
accessoires pour l’allaitement, est de soutenir le bien-être des mamans et de leur
bébé. Medela a développé des tire-laits qui répondent de façon optimale aux
besoins des mamans allaitantes, en collaboration avec des experts de l’allaitement
et des chercheurs avant-gardistes. Pour les mamans qui ne veulent que le meilleur
pour elles et pour leur bébé. “Parce que c'est important pour vous”.

EN
04–47
FR
48-91
#1 Choice of Hospitals & Mothers, PersonalFit, Tender Care, Harmony, Swing, Pump & Save, and
Maximum Comfort Vacuum are trademarks of Medela, Inc. Medela, Calma, Symphony, 2-Phase
Expression, Freestyle, and Pump In Style are registered trademarks of Medela Holding AG.
#1 Choice of Hospitals & Mothers, PersonalFit, Tender Care, Harmony, Swing, Pump & Save,
et Maximum Comfort Vacuum sont des marques de commerce de Medela, Inc. Medela, Calma,
Symphony, 2-Phase Expression, Freestyle, et Pump In Style sont des marques déposées de
Medela Holding AG.

1. Intended Use/Population - Contraindication ..............................6
2. Product Description ................................................................ 7-9
3. Cleaning .............................................................................10-15
3.1Before using for the first time and once a day...................10-11
3.2After each use.................................................................12-13
3.3Motor unit cleaning .........................................................14-15
4. Preparing for pumping .......................................................16-21
4.1Assembly of breastpump kit .................................................17
4.2Correctly fitting breastshields...........................................18-19
4.3Powering your breastpump..............................................20-21
4.3.1 Battery operation....................................................20-21
4.3.2 Display........................................................................21
4.3.3 Power operation.....................................................20-21
5. Breastpumping...................................................................22-25
5.1Double breastpumping .........................................................23
5.2Single breastpumping...........................................................23
5.3Device operation .............................................................23-25
6. Hands-free..........................................................................26-29
6.1Hands-free setup ............................................................27-29
6.2Top strap adjustment ...........................................................29
7. Breastmilk Handling ...........................................................30-33
7.1Breastmilk storage ..........................................................30-31
7.1.1 Storing breastmilk in Freestyle cooler bag ....................31
7.2Thawing breastmilk ..............................................................32
7.3Warming breastmilk..............................................................33
8. Troubleshooting..................................................................34-35
9. Additional Information.............................................................36
10. Meaning of Symbols ...................................................................38-39
11. Important Safety Information ....................................................40-41
12. Technical Specifications .................................................................42
13. AC/DC Transformer Care ...............................................................43
14. Warranty .............................................................................44-46
4
Table of Contents

Questions? www.medela.ca, [email protected] or 1-800-435-8316
5
Take a moment to read through this entire instruction manual before using this
product for the first time.
PLEASE SAVE THESE INSTRUCTIONS
Glossary of Terms
2-Phase Expression Technology – patented research based technology
exclusive to Medela that mimics a baby’s natural nursing rhythm.
Stimulation Phase – fast sucking/pumping rhythm to stimulate the milk
ejection reflex and to start the milk flowing.
Expression Phase – slower sucking/pumping rhythm for gentle and efficient
milk removal as quickly as possible.
Maximum Comfort Vacuum™ –highest vacuum setting where a mother still
feels comfortable during breastpumping. It is different for every mother.
The warning symbol identifies all instructions that are important to safety. Failure to
observe these instructions can lead to injury or damage to the breastpump. When
used in conjunction with the following words, the warning symbols stand for:
WARNING –Can lead to serious injury or death.
CAUTION – Can lead to minor injury.
NOTE – Can lead to material damage.
INFO – Useful or important information that is not related to safety.

For lactating women to express and collect milk from their breasts.
Intended patient population/user
Adolescent pediatric or adult lactating women. Many women find it convenient, or
even necessary, to use a breastpump to express and store their breastmilk once
they have returned to work, are traveling or are otherwise separated from their
baby. Women are often delighted to learn that a breastpump can be used as a
supplement to breastfeeding and that some breastpumps are designed to mimic
the suckling of a nursing baby.
Contraindications
There are no known contraindications for the Freestyle breastpump.
1. Intended Use / Population
Contraindication
6
i
l If you have medical reasons or other needs for exclusively breastpumping and
you have not established your breastmilk supply, it is recommended that you
use the hospital grade breastpump Symphony with the Initiation/Preemie+
Program Card.
To learn more, visit www.medela.ca/symphony.
NOTE

Freestyle 27260
Freestyle is a personal use electric breastpump with 2-Phase Expression
technology designed to get more milk in less time and to maintain an established
breastmilk supply. Freestyle is capable of single and double breastpumping.
2. Product Descriptions
Questions? www.medela.ca, [email protected] or 1-800-435-8316
7

Product Description
2x PersonalFit breastshield (24mm)
(for other breastshield sizes
see Section 4.2)
8
1x AC/DC transformer
1x rechargeable lithium
ion battery
1x ice pack
4x solid lids
1x cooler bag
2x Freestyle connector assembly
(connector, membrane, back cap)
4x bottles
4x clasp adaptors
2x strap sets
1x hands-free kit

Questions? www.medela.ca, [email protected] or 1-800-435-8316
9
1x Freestyle
tote bag
1x motor unit
belt clip
AC/DC
transformer
port
on/off button
reduce
vacuum
increase
vacuum
let-down button
memory
function key
memory
“on”
indicator
timer
power
indicator
battery indicator
expression
phase indicator
Freestyle
tubing port
battery
compartment
stimulation
phase
indicator
long tubing
1x Freestyle tubing
tubing
support
short tubing

3. Cleaning
10
3.1 Before using for the first time and once a day
Clean and disinfect the parts below. Ensure you clean and disinfect
these parts at least once per day.
• Membrane
• Back
cap
• Bottles and lids
• Breastshield
• Connector
i
l Freestyle tubing doesn’t require regular cleaning maintenance because
the media separation system prevents milk from entering the tubing. If you
live in an area with high humidity, you may find that your tubing sometimes
has condensation after use. If this is occurring, please refer to section 8
for instructions on removing condensation from your tubing. Using your
freestyle while condensation is present may cause damage to your motor.
NOTE

3. Cleaning
Questions? www.medela.ca, [email protected] or 1-800-435-8316
11
For subsequent uses,
you can use a Medela
Quick Clean Micro-Steam
bag in the microwave
in accordance with the
instructions for daily
disinfection.
1
Wash hands thoroughly.
3a
2a
Cover all parts with water,
bring water to a boil and boil
for 5 minutes. Allow water
to cool and gently remove
parts from water with tongs.
2b 3
Dry with a clean cloth or
leave to dry on a
clean cloth.
I Allow all parts to air dry.
I Store dry parts when not
in use.
I Do NOT store wet or
damp parts.
Disassemble the
breastpump kit into
individual parts.
2
Supplies Needed: • clean dish towel or soft brush
• clean sink or bowl • drinking quality water

12
l Do not store wet or damp parts as mold may develop.
CAUTION
3. Cleaning (cont.)
3.2 After each use
Clean all parts that come in contact with your breast and breastmilk.
See image in Section 3.1.
i
l Wash breastpump kit parts after each use.
l Disinfect cleaned breastpump kit parts once daily.
l The breastpump kit requires no maintenance.
l Take care not to damage parts of the breastpump kit during cleaning.
l If the individual components of the breastpump kit are cleaned in a dish
washer, parts may be discoloured by food pigments. This has no impact on
the function.
l Store the dry breastpump kit in a clean bag/bottle until next use.
NOTE

Questions? www.medela.ca, [email protected] or 1-800-435-8316
13
2
5ØOr (as an alternative
to steps 3 and 4)
I Wash all separated
parts on top rack
of dishwasher.
I Allow all breastpump
parts to air dry in a
clean area.
I Store dry parts when
not in use.
3
Rinse all separated parts
with cold clear water for
10 - 15 seconds.
Disassemble the
breastpump kit into
individual parts.
Rinse all separated parts
with cold, clear water
(approx. 20 °C) in order
to remove breastmilk
protein residue.
Clean all parts with plenty
of warm soapy water
(approx.30 °C).
I Soak all separated parts
in warm soapy water for
5 minutes.
I Clean with a clean
dish-cloth or soft brush.
Supplies Needed: • mild dish soap • clean dish towel or soft brush
• clean sink or bowl • drinking quality water
Dry with a clean cloth or
leave to dry on a clean cloth.
I Allow all parts to air dry.
I Store dry parts when not
in use.
I Do NOT store wet or
damp parts.
1
2b
4
3. Cleaning (cont.)

14
3. Cleaning (cont.)
3.3 Motor unit cleaning
l Do not store wet or damp parts as mold may develop.
l Do not immerse breastpump in water or allow breastpump to become wet.
CAUTION
i
l Unplug breastpump from power source.
NOTE

Questions? www.medela.ca, [email protected] or 1-800-435-8316
15
1
4
2 3
55
Remove tubing from
breastshield.
Turn off breastpump. Unplug breastpump from
power source.
Remove tubing by pulling
straight out of tubing ports.
Do not wiggle or pull tubing
at an angle.
Cleaning the motor unit:
Wipe off with a clean, damp
cloth. Do not immerse
breastpump in water
or allow breastpump to
become wet.
Supplies Needed: • clean dish towel or soft brush
• drinking quality water

16
4. Preparing for Pumping
Parts you will need for this step:
• tubing• membranes
• Back
caps
• breastpump
• bottles
and lids
• breastshields
l Wash hands thoroughly with soap and water before touching the breast and
breastpump parts.
l Carry out all the steps with care and assemble the breastpump kit correctly
for optimum performance.
CAUTION
i
l Use Medela original accessories only.
Warning: Using non-Medela original accessories with your Medela
breastpump represents a health risk.
l Check breastpump kit components for wear or damage before use and
replace if necessary.
l All components must be completely dry before use for proper performance
and to prevent damage to the breastpump.
NOTE
• connectors
INFO

Questions? www.medela.ca, [email protected] or 1-800-435-8316
17
Push the breastshield onto
the connector.
Insert the long tubing into
the motor unit.
1
4
7
Wash hands before
touching breastpump, kit
and breasts and avoid
touching the inside of
bottles or lids.
4.1 Assembly of breastpump kit
Screw bottle into connector. Insert the short tubing into
the back cap as far as it
will go.
Carefully insert the light
yellow membrane into the
base of the connector.
2
5
3
6
Fasten the back cap to the
connector
I Make sure that all 3 snaps
(top & side) are engaged.

18
4.2 Correctly fitting breastshields
Properly fitted breastshields will ensure comfort and efficient milk expression.
To determine if you have the correct size, look at the following diagram:
l The nipple should be centered in the tunnel of the shield.
l The nipple should move freely without rubbing when the
breastpump is turned on.
l No part of your breast should be pulled into the
breastshield tunnel; only your nipple should
move freely inside the tunnel.
l You should see a gentle, rhythmic motion in
the breast with each cycle of the breastpump.
l After breastpumping, your breast should feel much
less full with no areas of hardness.
Medela offers different sizes which are available at many
local retailers or visit www.medela.ca.
PersonalFit breastshields
(21mm, 24mm, 27mm, 30mm & 36 mm)
30 36
Choosing the right size PersonalFit breastshield
1 Determine the size you’re currently using. If you’re
not sure, look for the size embossed on your
breastshield (see picture). 24mm breastshields
are provided with Medela breastpumps.
2 While pumping, compare your fit to the images
below as a sizing guideline.
27
24
21
24mm
Correct fit
Your breastshield
is too small;
try a larger size
Your breastshield
is too large;
try a smaller size
30 36
Choisissez une téterelle PersonalFit qui convient
parfaitement à votre taille
1 Voyez la taille de téterelle que vous utilisez
présentement. Si vous n’êtes pas certaine,
vérifiez la taille marquée en relief sur votre téterelle
(voir l’illustration). La taille 24mm est livrée avec
tous les ensembles-accessoires de Medela.
2 En exprimant votre lait, comparez l’ajustement de votre
téterelle aux images paraissant ci-dessous, ce qui peut
vous servir de guide pour le choix de la bonne taille.
27
24
21
24mm
correctement
ajustée
Votre téterelle est
trop ajustée;
essayez une taille
plus grande
Votre téterelle est
trop grande;
essayez une taille
plus petite
4. Preparing for Pumping (cont.)
CAUTION
l While some discomfort may be felt when first using a breastpump, using a
breastpump should not cause pain.
l If you are unsure about breastshield sizing, please contact a healthcare
professional or breastfeeding specialist who can help you get a proper fit
or call Medela at 1-800-435-8316 to find a breastfeeding specialist in
your area.

Questions? www.medela.ca, [email protected] or 1-800-435-8316
19
30 36
Choosing the right size PersonalFit breastshield
1 Determine the size you’re currently using. If you’re
not sure, look for the size embossed on your
breastshield (see picture). 24mm breastshields
are provided with Medela breastpumps.
2 While pumping, compare your fit to the images
below as a sizing guideline.
27
24
21
24mm
Correct fit
Your breastshield
is too small;
try a larger size
Your breastshield
is too large;
try a smaller size
4. Preparing for Pumping (cont.)

20
Summary of battery charge status.
AC/DC transformer
connected to socket
Battery charge status
Battery fully charged, approx.
3 hours' expression
flashing
20 min. expression time
remaining. Battery removed
from motor unit
flashing Low battery, needs charging
“bAtt”
flashing
Initial charge and charging
after removing the battery
(up to 24 hours charging
time)
WARNING
4. Preparing for Pumping (cont.)
i
4.3.1 Battery operation:
If possible, do not remove the battery from the motor unit. Removing the
battery requires a charging time of up to 24 hours.
l The breastpump can be used during charging.
l The battery is charging as soon as the breastpump is connected to a power
source (even if the breastpump is not in use).
l If the breastpump has been
running for 30 minutes without any
manipulations, the Freestyle will
automatically switch off.
4.3.3 Power operation
Follow the exact order of the steps.
l Only use the AC/DC transformer
supplied with the Freestyle
breastpump.
l Make sure the voltage of the AC/DC
transformer is compatible with the
power source.
l Do not use force to push the battery into the battery compartment.
l Do not use Freestyle without battery – this can cause permanent damage to
your Freestyle motor.
NOTE
INFO
INFO
4.3 Powering your breastpump