Medeli Millenium Series Installation guide

FAQ Medeli keyboards
MIDI CONNECTION
Connection and Driver
Step 1: Preparation
You can connect the keyboard to a PC or laptop through either the
MIDI port or the USB port.
● Connection through MIDI port: make sure the MIDI Adapter is
compatible to your computer. If not, please visit its website and see if
there’s an updated driver for the MIDI Adapter.
● Connection through USB port: it will automatically install an internal
driver for the operating system. For more details, please check the USB
Compatibility List with OS.
Step 2: Turn off the keyboard.
Step 3: Connection
● Through MIDI port: plug MIDI IN cable to MIDI OUT port of the keyboard
and/or MIDI OUT cable to its MIDI IN port.
● Through USB port: connect the keyboard with a USB cable.
Step 4: Check if the module is properly connected by doing the followings:
● Turn on the computer.
●Switch on the keyboard and your computer will recognize it as “USB
Audio Device”. You can find “e-Organ” or “USB Audio Device” on the
“Device Manager” window once the connection is successful.
●In case your computer fails to recognize the keyboard, please try again
with another computer, as some internal USB Audio drivers will become
invalid when an unknown driver is automatically installed.
Please download MIDI Connection Guide for details about the MIDI
Connection and Device Recognition.

Device Recognition
Record a MIDI Song
Step 1: Install a MIDI sequencer software on your computer. Make sure
the keyboard is properly connected and recognized by the
computer.
Step 2: Run the sequencer software, and “USB Audio Device” will appear
on the list of input MIDI devices.
Step 3: Select “USB Audio Device” from the Input options, and now it’s
ready to record your songs.
SD CARD
Q: How to use a SD card?
A: Please follow the 4 steps below:
Step 1: Get the right SD card. You can check it on the Storage Device
Compatibility List.
Step 2: Format the card with your computer before using it.
Step 3: Insert the card to the CARD slot of the keyboard. If poor
connection occurs, please clean the metal connection part and try
again.
Step 4: Screen will display a card icon or card menu upon successful
connection.
FACTORY SETTING
Q: How to restore my keyboard to its factory setting?
A: Press down [ + / YES ] and [ - / NO ] buttons, and at the same time turn on
the instrument.
PC SOFTWARE
Q: Do you have any PC software to make styles from MIDI files?
A: You can access it from the Downloads page.
STYLES LOAD
Q: Do you have any other style for my keyboard?
A: You can access it from the Downloads page.