Meinberg DI/BGT TTL User manual

Meinberg Radio Clocks
Lange Wand 9
31812 Bad Pyrmont, Germany
Phone: [phone]
Fax: [phone]
https://www.meinbergglobal.com
[email protected]
DI/BGT: TTL Signal Diplexer in modular 3U Case
Distribution Unit for TTL pulses and frequencies input and outputs in modular case:
DI/BGT is built-up in a 19" modular chassis with included power supply. The diplexer is equipped with BNC
connectors for the input as well as for the outputs. Standard configuration with single signal
distribution module:
* 1 x TTL input, BNC connector
32 x TTL outputs via BNC connectors
Key Features
- Distributes a single or two input TTL signals to 32 - 64 TTL level outputs via different connector types
(BNC, DFK, ST connector ...)
- Also available for IRIG Time Codes (AM/DCLS)
- Redundant hardware configuration with two independant input signals, two power supplies and up to 32
output connectors for each module.
rev 2023.0102.1028 di-bgtPage 1/3

Description
This TTL signal diplexer can distribute a single TTL signal like 1PPS, 10MHz and a lot of other signals with TTL level to
32 up to 64 outputs via BNC connector.
Optionally we can add an SCU switch card logic (also available as SCU-XPT with network management functionality)
combined with an error signal input to manage the SCU card automatically when an error occurs from the connected
Meinberg RADIO CLOCK. The DI/BGT can be equipped with two power supplies for full redundant operation.Possible
configuration options:
* SCU Switch Card (SCU-XPT network management port), Error input
* Redundant power supply
* Time Code distribution module
* Fiber optical connectors
* Error relay output
Because of our modular design of the signal distributor systems, we are able to offer you a system which is fit to your
specific requirements. Just ask our technical staff and we will advise you without obligation, or simply request a quote for
your desired system.
rev 2023.0102.1028 di-bgtPage 2/3

Characteristics
Physical Dimensions 485mm x 132mm x 290mm
Electrical connectors Power Cord Receptacle
Power Supply 100-240 VAC, 50-60Hz
Ambient Temperature 0 to 50 °C (32 to 122 °F)
Humidity Max. 85 %
Warranty Three-year warranty
RoHS Status of Product This product is fully RoHS-compliant.
WEEE Status of Product This product is handled as a B2B (Business to Business) category product. To ensure
that the product is disposed of in a WEEE-compliant fashion, it can be returned to the
manufacturer. Any transportation expenses for returning this product (at end-of-life)
must be covered by the end user, while Meinberg will bear the costs for the waste
disposal itself.
Manual
There is no online manual available for this product.: [1]Contact us
Links:
[1] mailto:[email protected]
rev 2023.0102.1028 di-bgtPage 3/3