MeiTrack MVT800 User manual

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
1 of 25
Revision:
V1.8
Confidential:
External Documentation
MEITRACK® Vehicle GPS Tracker
User Guide
MVT800
Copyright © 2014 Meitrack Group All rights reserved.
1
All manuals and user guides at all-guides.com
all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
2 of 25
Revision:
V1.8
Confidential:
External Documentation
Content
1. Copyright and Disclaimer.................................................................................................................................. 3
2. Applications ...................................................................................................................................................... 3
3. Product Function and Specifications................................................................................................................. 3
3.1 Product Function.......................................................................................................................................... 3
3.2 Specifications ............................................................................................................................................... 4
4. MVT800 and Accessories .................................................................................................................................. 5
5. View.................................................................................................................................................................. 6
6. First Use ............................................................................................................................................................ 6
6.1 Install SIM Card ............................................................................................................................................ 6
6.2 LED Indications............................................................................................................................................. 7
6.3 Configure by Computer ................................................................................................................................ 7
6.3.1 Set Authorized Phone Number.......................................................................................................... 9
6.3.2 Set GPRS/SMS Tracking ................................................................................................................... 10
6.4 Protocol Selection ...................................................................................................................................... 11
6.5 Meitrack Protocol Series ............................................................................................................................ 11
6.5.1 Real-time Tracking by Mobile Phone............................................................................................... 11
6.5.2 Set Function Phone Numbers.......................................................................................................... 13
6.5.3 Arming/Disarming ........................................................................................................................... 14
6.6 Meiligao Protocol Series............................................................................................................................. 15
6.6.1 Real-time Tracking by Mobile Phone............................................................................................... 15
6.6.2 Set Function Phone Numbers.......................................................................................................... 16
6.6.3 Arming/Disarming ........................................................................................................................... 16
6.7 Advanced Settings ...................................................................................................................................... 16
6.7.1 Vehicle Transfer Coefficient Function .............................................................................................. 16
6.7.2 RF Match Wireless Remote Control and Vehicle (Optional) ............................................................ 17
6.8 GPS Tracking System................................................................................................................................... 18
7. Installation ........................................................................................................................................................... 20
7.1 Connect GPS/GSM Antennas...................................................................................................................... 20
7.2 Install I/O Cable.......................................................................................................................................... 21
7.2.1 The Definition of I/O Cable.............................................................................................................. 21
7.2.2 I/O Photos ....................................................................................................................................... 22
7.2.3 Power Cable/Ground Wire .............................................................................................................. 22
7.2.4 The Detection Port of High Level and Low Level Configuration....................................................... 23
7.2.5 ACC and Door Detection.................................................................................................................. 23
7.2.6 Signal of Vehicle Speed Sensor Detection ....................................................................................... 23
7.2.7 Remote Control Stop Engine ........................................................................................................... 24
7.2.8 Buzzer Alarm (Optional) .................................................................................................................. 24
7.2.9 Detection Port of Temperature and Fuel --- Meitrack Protocol Only (Optional).............................. 25
7.2.10 Port of Microphone and Speaker (Optional) ................................................................................. 25
7.3 Mount the MVT800 Unit ............................................................................................................................ 25
Copyright © 2014 Meitrack Group All rights reserved.
2
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
3 of 25
Revision:
V1.8
Confidential:
External Documentation
1. Copyright and Disclaimer
Copyright © 2014 MEITRACK. All rights reserve.
MEITRACK and are trademarks that belong to Meitrack Group.
The user manual may be changed without prior notification.
This user manual, or any part thereof, may not be reproduced for any purpose whatsoever without the written
authorization of Meiligao (MEITRACK), or transmitted in any form, either electronically or mechanically, including
photocopying and recording.
In no event shall Meiligao (MEITRACK) be liable for direct, indirect, special, incidental, or consequential damages
(including but not limited to economic loss, personal injury, and loss of asset and property) arising out of the use
or inability or illegality to use the product or documentation.
2. Applications
Vehicle Real Time Tracking and Security
Fleet Management
3. Product Function and Specifications
3.1 Product Function
U-blox 6 GPS and Quad Band GSM 850/900/1800/1900Mhz
GPS + GSM Dual Module Tracking
SMS/TCP/UDP (MEITRACK and Meiligao Protocol compatible)
Waterproof IP65
Track on Demand
Track by Time/ Distance Interval
Track on Mobile Phone
Listen-in or Two-way Audio (Optional)
Internal Flash Memory (8M)
Inbuilt Motion Sensor
Internal Backup Battery 850mAh
SOS Alarm
Geo-fence Alarm
GPS Blind Area Alarm
Low Battery Alarm
Speeding Alarm
Tow Alarm
GPS Antenna/ External Power Cut Alarm
Copyright © 2014 Meitrack Group All rights reserved.
3
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
4 of 25
Revision:
V1.8
Confidential:
External Documentation
Mileage Report
Engine Cut (Engine immobilization)
4 Digital Input(1 Negative,1 Positive and 2 can be set through software)
2 Output
1 Analog Input for Fuel Detection (Optional)
1 Input for Pulse Speed Detection
1 Output for Buzzer Alarm (Optional)
1 Input for Digital Temperature Sensor (Optional)
Wireless Remote Control (Arming, Disarming, SOS, Looking for Car in Garage) (Optional)
3.2 Specifications
Items Specifications
Dimension 90*65*32mm
Weight 220g
Input Voltage DC 11V~36V/1.5A
Back-up Battery 850mAh/3.7V
Power consumption 85mA standby current
Operating Temperature -20℃~55℃
Humidity 5%~95%
Work Time 36 hours in power-saving mode and 8 hours in normal mode
LED 2 LED lights to show GPS, GSM status
Button 1 SOS and 1 power on/off
Microphone External connection (Optional)
Memory 8M Byte
Sensor Motion sensor
GSM Frequency GSM 850/900/1800/1900MHz
GPS Chip Latest GPS U-blox chipset, 50 channels all-in-view tracking
GPS Sensitivity -161dB
Positioning Accuracy 10 meters
GSM/GPS Antenna SMA external connection antenna
I/O 4Digital Input(1 SOS, 1 Positive,1 Door Trigger, 1 ACC Detection)
1 Pulse Speed Detection
2 Output(1 Buzzer Alarm,1 Remote Engine Cut)
1 Analog Input
1 Input for Digital Temperature Sensor
1 USB232 Interface
1Wireless Remote Control (433Mhz)
Copyright © 2014 Meitrack Group All rights reserved.
4
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
5 of 25
Revision:
V1.8
Confidential:
External Documentation
4. MVT800 and Accessories
MVT800 with Battery GPS Antenna GSM Antenna I/O Cable
Power Extension Cord SOS Button USB Data Cable CD
Optional Accessories:
Wireless
Remote Control
Buzzer Alarm Microphone Speaker
Fuel Sensor Temperature
Sensor
RF Antenna
Copyright © 2014 Meitrack Group All rights reserved.
5
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
6 of 25
Revision:
V1.8
Confidential:
External Documentation
5. View
6. First Use
6.1 Install SIM Card
Check that the SIM has not run out of credit (Verify the SIM card has sufficient fund
and fully function in a phone);
Check the SIM Lock code feature is off;
If MVT800 required to send SMS to a function phone number, make sure the Caller ID
is not block.
Before installing the SIM card, make sure the MVT800 is power off.
Unscrew and remove cover of MVT800.
Insert the SIM card by sliding it into the card holder with the chip module facing to
the connectors on PCB.
Put the cover and screws back in place.
GSM Antenna (Sliver) GPS Antenna (Gold)
Power and Functional Cables
GSM LED (Green) GPS LED (Blue)
On/Off
Copyright © 2014 Meitrack Group All rights reserved.
6
All manuals and user guides at all-guides.com
all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
7 of 25
Revision:
V1.8
Confidential:
External Documentation
6.2 LED Indications
Press and hold the Power On/Off button for 3~5 seconds to turn on/off MVT800.
GPS LED (Blue)
On One button is pressed or input is active.
Flashing ( every 0.1 second) Initializing or back-up battery power is low
Flashing (0.1 second on and 2.9 seconds off) MVT800 has a GPS fix
Flashing (1 second on and 2 seconds off) MVT800 has no GPS fix
GSM LED (Green)
On A call is coming in / a call is being made
Flashing ( every 0.1 second) Initializing
Flashing (0.1 second on and 2.9 seconds off) MVT800 is connected to the GSM network
Flashing (1 second on and 2 seconds off) MVT800 is not connected to the GSM network
6.3 Configure by Computer
The following shows you how to configure the MVT800 with MEITRACK Manager.
Please refer to the MEITRACK Manager User Guide for more detailed on configurations and functions.
For the first time use of USB-to-serial cable, it is required to install the PL2303 Driver
Connect the USB Data Cable between MVT800 and PC.
Meitrack Manager will automatically detect port and model, and enter into the main interface as follow:
GSM LED (Green)
GPS LED (Blue)
Copyright © 2014 Meitrack Group All rights reserved.
7
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
8 of 25
Revision:
V1.8
Confidential:
External Documentation
Copyright © 2014 Meitrack Group All rights reserved.
8
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
9 of 25
Revision:
V1.8
Confidential:
External Documentation
6.3.1 Set Authorized Phone Number
Select Column 4 Authorize: to set authorized phone number, event, etc.
Please refer to the MEITRACK Manager User Guide for more detailed information regarding configuration and
functions.
Copyright © 2014 Meitrack Group All rights reserved.
9
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
10 of 25
Revision:
V1.8
Confidential:
External Documentation
6.3.2 Set GPRS/SMS Tracking
Select Column 2 Tracking: to set SMS tracking & monitoring phone number and GPRS parameters, such as Server
IP, and Port (IP/Domain: 67.203.13.26, Port: 8800), APN, Time Interval, etc.
Please refer to the MEITRACK Manager User Guide for more detailed information regarding configuration and
functions.
Note: Meitrack Manager software can be found in the enclosed CD. The Language will be chosen automatically
according to the user operating system or press Ctrl + L to change the language.
Copyright © 2014 Meitrack Group All rights reserved.
10
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
11 of 25
Revision:
V1.8
Confidential:
External Documentation
6.4 Protocol Selection
Notice: please don’t switch the protocol to Meiligao if necessary, or some functions may not work via the same
command.
MVT800 is compatible with both Meitrack and Meiligao Protocol (Default: Meitrack Protocol). Please set through
Meitrack Manager.
Steps: Connect MVT800 with Personal Computer, click Meitrack Manager.exe, enter the main interface to
configure device and click Switch to Meiligao Protocol to change the default Meitrack Protocol to Meiligao
Protocol.
6.5 Meitrack Protocol Series
6.5.1 Real-time Tracking by Mobile Phone
Make a call to MVT800 and it will report with one SMS.
Click on the link then the location can be shown directly on Google Maps on your mobile phone.
Copyright © 2014 Meitrack Group All rights reserved.
11
All manuals and user guides at all-guides.com
all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
12 of 25
Revision:
V1.8
Confidential:
External Documentation
Report description:
Now,110727 02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329
&ie=UTF8&z=16&iwloc=addr&om=1
Content Description Note
Now Current Location Alarm Type
110721 16:40 Date & Time: 21 July, 2011, 16:40pm Date & Time in YYMMDD HH:MM
V No GPS fixed GPS Status Indicator:
A = valid, V = invalid
10 GSM signal=10 GSM Signal. Decimal Digit (0~31)
0Km/h Speed=0 KM/h. Decimal digit
97% Battery Power: 97% Battery Power Balance (Percentage)
http://maps.google.c
om/maps?f=q&hl=en
&q=22.540103,114.0
82329&ie=UTF8&z=1
6&iwloc=addr&om=1
Latitude: 22.513015
Longitude: 114.057235
Google Maps Web Link with Latitude and
Longitude. Click on the link to get the
location.
If your mobile cannot visit HTTP websites, input the latitude and longitude into Google Maps as the following
picture shows to get the position:
Copyright © 2014 Meitrack Group All rights reserved.
12
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
13 of 25
Revision:
V1.8
Confidential:
External Documentation
More SMS Commands
You can configure MVT800 by mobile phone or by personal computer using the MEITRACK Manager. Please refer
to the following text.
Note:
1. The default password is 0000, it can be modified through SMS command (Refer to below text) and Meitrack
Manager via personal computer (Refer to 6.3 Configure by Computer).
2. MVT800 will only accept commands from a user with the correct password and report SMS report to the user.
If function phone number was set, only this phone number can receive SMS reports.
6.5.2 Set Function Phone Numbers
Command: 0000, A71,function phone number 1,function phone number 2,function phone number 3
SMS Get: IMEI, A71, OK
Note：
Function Phone Number: Max 16 characters. If no preset phone number, it is empty (default is empty).
First Function Phone Number: Authorize for SOS Alarm, Calling for Real-time Location, Geo-fence Alarm, Low
Battery Alarm, Open the Vehicle’s Door or Start the Vehicle without permission.
Send command “0000, A71” to delete all function phone numbers.
When the SOS button is pressed, MVT800 will make a call to the function phone number 1, 2 and 3. It will stop
calling when one number answers.
Example: 0000,A71,13811111111,13822222222,13833333333
SMS Get: 353358017784062,A71,OK
Copyright © 2014 Meitrack Group All rights reserved.
13
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
14 of 25
Revision:
V1.8
Confidential:
External Documentation
6.5.3 Arming/Disarming
There are two ways to set Arming, either through Wireless Remote control (Optional), or SMS Command
Suggestion: Using the optional accessory Wireless Remote Control and Buzzer Alarm to strengthen protection,
and please set the Function Phone Number to make sure it can be received the call and SMS Report while stolen.
Wireless Remote Control: Press the Lock key to Arm. If buzzer alarm installed, it will sound to confirm the
Arming successfully, else if buzzer is not available, then open the vehicle’s door to trigger a SMS alert or a
call to be sent to the function phone number. Press Unlock to Disarm.
SMS Command: Arming and Disarming by SMS Command.
Command: 0000,B21,Status
SMS Get: IMEI,B21,OK
Note: Status=1 Arming, Status=0 Disarming.
While in Armed status, and as been triggered by open door or engine starts; MVT800 will call or send SMS
report to the function phone number.
In the status of Disarm, all security alarms will be OFF.
Function Call SMS Engine Cut Buzzer Note
Open the
Vehicle’s
Door
√√√
While open the vehicle’s door without permission, the
buzzer will alarm all the time until unlock the status;
MVT800 will send call in turns and send SMS report to
the function phone numbers.
Start the
Vehicle
√√√√
While start the vehicle, the engine will be cut to avoid
stolen, buzzer will alarm all the time until unlock the
status; MVT800 will send call in turns and send SMS
report to the function phone numbers.
Set Arming
while Driving
(Intercept
the Driving
Vehicle )
√√
While the vehicle was stolen, arming (the arming would
work only setting by SMS or GPRS while driving) and it
can be stopped engine to intercept if the speed is lower
than 5km/h.
Tow Alarm √√√
On the status of ACC off, the theft alarm will be trigger
while the vehicle vibrate.MVT800 will send call in turns
and send SMS report to the function phone numbers.
Please refer to the MEITRACK SMS Protocol for more detailed SMS command.
Copyright © 2014 Meitrack Group All rights reserved.
14
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
15 of 25
Revision:
V1.8
Confidential:
External Documentation
6.6 Meiligao Protocol Series
6.6.1 Real-time Tracking by Mobile Phone
Method I: Make a call to MVT800 and it will report with one SMS.
Latitude = 22 32 36.63N Longitude = 114 04 57.37E, Speed = 2.6854Km/h, 2008-12-24,01:50
Location Online Checking: Visit http://maps.google.com and enter the Latitude and Longitude to get the location:
Method II: SMS Command (Get a map link )
Command: W000000,100
SMS Get:
http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329&ie=UTF8&z=16&iwloc=addr&om=1
Note: The first value 22.540103 is Latitude, the second value 114.082329 is Longitude.
Click on the link then the location can be shown directly on Google Map on your mobile phone.
Note: Only smart phones and PDAs support this function.
Example:
W000000,100
Copyright © 2014 Meitrack Group All rights reserved.
15
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
16 of 25
Revision:
V1.8
Confidential:
External Documentation
6.6.2 Set Function Phone Numbers
Command: W******,003,F,P,T
Description: Function Phone Number are to receive calls and SMS reports of SOS Alarms, the Alarm and Location
of Input 2/Input 3, and Open the Vehicle’s door or Start the Vehicle without permission.
Note:
F=0, Off (Default)
F=1, Send SMS report only
F=2, Send SMS report and Call
P=1, Set SOS function phone number (Input 1), default to be the number receiving the alarm while open the
Vehicle’s door or start the Vehicle without permission.
P=2, Set the function phone number of Input2
P=3, Set the function phone number of Input3
T: Default Function Phone Number, Max 16 characters.
Example:
W000000,003,1,1,88888888
Please refer to the Meiligao Protocol for more detailed SMS command.
6.6.3 Arming/Disarming
The same method of Meitrack Protocol, please refer to 6.5.3 Arming/Disarming
6.7 Advanced Settings
6.7.1 Vehicle Transfer Coefficient Function
Please connect digital input 5 to vehicle speed sensor then the vehicle’s speed can be calibrated by setting Vehicle
Transfer Coefficient. Vehicle’s speed and mileage will be calculated by the latest transfer coefficient after
calibration successfully.
Two methods:
1. Calibrate Automatically: GPS Speed will be calibrated automatically by transfer coefficient
1) Vehicle has been driving for 60s by the speed beyond 60km/h sequentially.
2) MVT800 has recorded the pulse numbers of sensor in 60s.
3) No sound prompt
4) It won’t be calibrated if there is no pulse.
Copyright © 2014 Meitrack Group All rights reserved.
16
All manuals and user guides at all-guides.com
all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
17 of 25
Revision:
V1.8
Confidential:
External Documentation
2. Calibrate Manually: GPS Speed will be calibrated by setting manually.
1) Send SMS/GPRS Command B23 to enter the status of calibration. The buzzer will make a long sound and the
green light on.
SMS Command: 0000,B23,Status
Description: Status=1, entering calibration; the SMS Command is: 0000,B23,1
Status=2, exit calibration
Get: 0000,B23,OK
2) After the Vehicle drives at the speed of 40km/h, press SOS for 2s, MVT800 starts to count the numbers of pulse;
after calibrating successfully, the buzzer will make 2 short sounds and 2 long sounds, and the green light recover
to the normal status.
3) The calibrate value will be saved automatically after successfully, it will no long to count by GPS speed.
4) Without press SOS after on the status of calibration, the calibration will exit automatically.
6.7.2 RF Match Wireless Remote Control and Vehicle (Optional)
If the wireless remote control doesn’t match with MVT800, please match the code manually. To get the status of
the matching, please install buzzer alarm when matching the code.
There are 2 methods:
1. Match by ACC
Note: If connected Input 4 with ACC, please match follow the steps as below:
1) Turn ACC OFF to ACC ON for 8 times, on the 8th times stay at ACC ON.
2) Wait for 3 seconds, the buzzer will make 2 short sounds and a long sound entering the matching status, and
the green light of the wireless remote control on at the same time.
3) In the status of matching, please press any key of the wireless remote control which is under code matching in
20 seconds. The buzzer will make two sounds to prompt matching successfully.
If continue to matching a second wireless remote control, please press any key within this 20 seconds. The buzzer
will make two sounds to prompt matching successfully.
4) Only matching for one wireless remote control, if no any operation when successfully matching code, it will exit
automatically after 20 seconds.
Note:
The times of turn ACC ON to OFF will be cleaned if the time internal beyond 3s in one turns.
Please complete code match within 20 seconds, or it will exit automatically.
If pressing for a second time on the same wireless remote control, it will successfully match code and exit
the matching mode.
2. Match by SMS Command:
1) SMS Command: 0000,B24,Status
Description: Status=1, entering matching; the SMS command is 0000,B24,1
Status=0, exit matching
Get: 0000,B24,OK
2) After enter into the status of matching, please refer to the above steps.
Copyright © 2014 Meitrack Group All rights reserved.
17
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
18 of 25
Revision:
V1.8
Confidential:
External Documentation
3. Key on RF Wireless Remote Control
12
3 4
1) Key-1: Short press to arming, the buzzer will make a sound.
2) Key-2: Short press to disarming, the buzzer will make 2 sound.
3) Key-3: Long press for 2s (SOS button function), receive SMS/GPRS alarm. While call the function phone number
it will enter into sound off listen-in, the buzzer and speaker won’t sound.
4) Key-4: Looking for vehicle in the garage, short press and the buzzer will make 5 sounds.
Note: for more detail information Arming Status, please refer to 6.5.3 Arming/Disarming.
6.8 GPS Tracking System
Steps:
Configure Parameters -Log in Meitrack Family GPS Tracking System MS02 (www.trackingmate.com) - Add Devices
1. There 2 methods to configure:
Configure by SMS: Send SMS command (0000,A21,1,IP,Port,APN,APN username,APN password) and
(0000,A12,6,0) to MVT800.
Configure by Meitrack Manager: connect with personal computer, run Meitrack Manager.exe, enter the main
interface and select GPRS Tracking, setting Server IP, Port, APN, Turn on TCP and Time Internal.
Copyright © 2014 Meitrack Group All rights reserved.
18
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
19 of 25
Revision:
V1.8
Confidential:
External Documentation
2. Visit and log in ms02.trackingmate.com (Please contact us if lost your account and password)
3. Enter the map and click Manage -Admin
4. Select Users and add the new device.
5. Get IMEI from serial port and register via IMEI (The IMEI is 011691003108431 for example)
Copyright © 2014 Meitrack Group All rights reserved.
19
All manuals and user guides at all-guides.com

File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
20 of 25
Revision:
V1.8
Confidential:
External Documentation
6. Double click the Control Panel on the right of the main interface to check if the data on the bottom is updated.
7. Installation
7.1 Connect GPS/GSM Antennas
GSM Antenna GPS Antenna
Connect the GSM antenna to the SMA connector which is ‘GSM’ text labeled. The GSM antenna is non-directional,
so you can hide it in any place of vehicle.
Connect GPS antenna to the GPS connector which is ‘GPS’ labeled. The optimum location for the GPS antenna is
on the roof of the vehicle. The covert and GPS antenna are directional, make sure they are facing up and lying as
flat as possible. Secure them in place with glue or zip ties.
Note: Do not shield or cover the GPS antenna with any objects containing metal.
Copyright © 2014 Meitrack Group All rights reserved.
20
All manuals and user guides at all-guides.com