MeiTrack T3 User manual

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 1 - of 22
Revision:
V1.5
Confidential:
External Documentation
MEITRACK®
VEHICLE GLONASS/GPS TRACKER
T3
User Guide
Copyright © 2014 Meitrack Group All rights reserved.
- 1 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 2 - of 22
Revision:
V1.5
Confidential:
External Documentation
Contents
1. Copyright and Disclaimer..............................................................................................................................- 3 -
2. Applications .................................................................................................................................................. - 3 -
3. Product Function and Specifications............................................................................................................. - 3 -
3.1 Product Function............................................................................................................................. - 3 -
3.2 Specifications .................................................................................................................................. - 4 -
4T3 and Accessories........................................................................................................................................ - 5 -
5View.............................................................................................................................................................. - 5 -
6First Use ........................................................................................................................................................ - 5 -
6.1 Install SIM Card ...............................................................................................................................- 5 -
6.2 Charging .......................................................................................................................................... - 6 -
6.3 LED Indications................................................................................................................................- 6 -
6.4 Track by Calling ............................................................................................................................... - 6 -
6.4.1 Multiple Phone numbers– A71 .........................................................................................- 8 -
6.4.2 Listening-in (Voice Monitoring)–A72................................................................................. - 8 -
6.4.3 Sleep Mode – A73 .............................................................................................................- 9 -
6.4.4 Geo-fence Alarm – B05 .....................................................................................................- 9 -
6.4.5 Time Zone– B35 .............................................................................................................. - 10 -
6.5 Configure by Computer................................................................................................................. - 10 -
6.5.1 SMS Tracking ................................................................................................................... - 12 -
6.5.2 GPRS Tracking .................................................................................................................. - 14 -
7Installation .................................................................................................................................................. - 17 -
7.1 Install I/O Cable............................................................................................................................. - 17 -
7.1.1 Power/GND (PIN1/PIN2)..................................................................................................- 18 -
7.1.2 Digital Input (PIN3/PIN5 Negative Triggering)..................................................................- 18 -
7.1.3 Digital Input (PIN7 Positive Triggering)............................................................................- 18 -
7.1.4 Output (PIN10/PIN11/PIN12) ..........................................................................................- 19 -
7.1.5 Analog Input (PIN8/PIN9) ................................................................................................ - 19 -
7.2 Install Handset Phone (RS232 Interface).......................................................................................- 20 -
7.3 Install RFID Reader (RS232 Interface)............................................................................................- 20 -
7.4 Install Camera (RS232 Interface) ................................................................................................... - 21 -
7.5 Install GPS/GLONASS/GSM Antennas ...........................................................................................- 21 -
7.6 Mount the T3 unit.........................................................................................................................- 22 -
Copyright © 2014 Meitrack Group All rights reserved.
- 2 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 3 - of 22
Revision:
V1.5
Confidential:
External Documentation
1. Copyright and Disclaimer
Copyright © 2014 Meitrack Group. All rights reserve
MEITRACK and are trademarks that belong to Meitrack Group
.
The user manual may be changed without prior notification.
This user manual, or any part thereof, may not be reproduced for any purpose whatsoever without the written
authorization of Meiligao (MEITRACK), or transmitted in any form, either electronically or mechanically, including
photocopying and recording.
In no event shall Meiligao (MEITRACK) be liable for direct, indirect, special, incidental, or consequential damages
(including but not limited to economic loss, personal injury, and loss of asset and property) arising out of the use
or inability or illegality to use the product or documentation.
2. Applications
Vehicle Real Time Tracking
Car Security/Anti-Hijack
Fleet Management
3. Product Function and Specifications
3.1 Product Function
Quad Band GSM 850/900/1800/1900Mhz
SiRF III GPS Module
Glonass (L1, FDMA)
AGPS (LBS Tracking)
Track by SMS/GPRS (TCP/UDP) (MEITRACK Protocol)
Track on Demand
Track by Time Interval
Track by Distance Interval
Track on Mobile Phone
Listen-in (Voice Monitoring) or Two-way Audio (Optional)
Internal 8MB Memory for Logging
Inbuilt Motion Sensor
Inbuilt Acceleration Sensor
850mAh Internal Backup Battery
SOS Alarm
Copyright © 2014 Meitrack Group All rights reserved.
- 3 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 4 - of 22
Revision:
V1.5
Confidential:
External Documentation
Geo-fence Alarm
GPS/GLONASS Blind Area Alarm
Low Battery Alarm
Speeding Alarm
Tow Alarm
GPS/GLONASS Antenna Cut Alarm
External Power Cut Alarm
Mileage Report
Engine Cut (Engine immobilization)
Inbuilt Super Magnet (optional)
3 Digital Inputs (1 positive triggering and 2 negative triggering), 3 Outputs.
2 Analog Input Detection
1 RS232 Interface (for connecting to handset/RFID reader etc.)
3.2 Specifications
Items Specifications
Dimension 105*65*26mm
Weight 190g
Input Voltage DC 9V~36V/1.5A
Back-up Battery 850mAh/3.7V
Power
consumption
65mA standby current
Operating
Temperature
-20℃~55℃
Humidity 5%~95%
Work Time 43 hours in power-saving mode and 10 hours in normal mode
LED 2 LED lights to show GPS/GLONASS, GSM and other status
Button 1 SOS (for SMS or making call) and 1 power on/off
Memory 8M Byte
Sensor Motion sensor & acceleration sensor
GSM Frequency GSM 850/900/1800/1900MHz
GLONASS Chip L1, FDMA
GPS Sensitivity -159dB
Positioning
Accuracy
10 meters, 2D RMS
I/O 3 Digital Input ( 1 positive triggering and 2 negative triggering)
2 Analog Input Detection
3 Output
1 RS232 Interface (for connecting to handset phone/RFID reader/LCD display etc)
1 USB port
Copyright © 2014 Meitrack Group All rights reserved.
- 4 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 5 - of 22
Revision:
V1.5
Confidential:
External Documentation
4T3 and Accessories
T3 with
Battery
GPS/GLO
NASS
Antenna
GSM
Antenna
I/O Cable +
SOS Button
USB Data Cable CD
Optional Accessories
Camera(connect
max 3 cameras)
Handset
Phone
RFID Reader A21 LCD Player(dialing,
calling, show SMS)
5View
6First Use
6.1 Install SIM Card
Make sure SIM card has enough balance (test the SIM in a phone to make sure it
can send and receive SMS);
Make sure the SIM Lock code is turned off;
If you require the function of sending an SMS location report to the authorized
phone number when it makes a call to the T3, please make sure the SIM installed
supports displaying caller ID.
GPS/GLONASS LED
GSM LED
On/Off
GSM Antenna GPS/GLONASS
Handset & RFID
USB Port I/O
Copyright © 2014 Meitrack Group All rights reserved.
- 5 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 6 - of 22
Revision:
V1.5
Confidential:
External Documentation
Before installing the SIM card, turn off the power for T3.
Unscrew and remove cover.
Insert the SIM card by sliding it into the card holder with the chip module facing to
the connectors on PCB.
Replace the cover and screw it in.
6.2 Charging
Please connect GND (-Black) and Power (+Red) wires to 12V or 24 external power and make sure to charge the
battery for at least 3 hours.8 hours is highly appreciated.
Configuration and testing suggested be prior to installation.
6.3 LED Indications
Press and hold the Power On/Off button for 3~5 seconds to turn on/off T3.
GPS/GLONASS LED (Blue)
On One button is pressed or input is active.
Flashing ( every 0.1 second) Initializing or back-up battery power is low
Flashing (0.1 second on and 2.9 seconds off) GPS/GLONASS signal available
Flashing (1 second on and 2 seconds off) No GPS/GLONASS signal
GSM LED (Green)
On A call is coming in / a call is being made
Flashing ( every 0.1 second) Initializing
Flashing (0.1 second on and 2.9 seconds off) GSM signal available
Flashing (1 second on and 2 seconds off) No GSM signal
6.4 Track by Calling
Make a call to T3 and it will report with one SMS.
For example,
Now,110727 02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329
&ie=UTF8&z=16&iwloc=addr&om=1
Copyright © 2014 Meitrack Group All rights reserved.
- 6 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 7 - of 22
Revision:
V1.5
Confidential:
External Documentation
Click on the link then the location can be shown directly on Google Maps on your mobile phone.
Report description:
Now,110727 02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329
&ie=UTF8&z=16&iwloc=addr&om=1
Content Description Note
Now Current Location Alarm Type
110721 16:40 Date & Time: 21 July, 2011, 16:40pm Date & Time in YYMMDD HH:MM
V No GPS/GLONASS fixed GPS/GLONASS Status Indicator:
A = valid, V = invalid
10 GSM signal=10 GSM Signal. Decimal Digit (0~31)
0Km/h Speed=0 KM/h. Decimal digit
97% Battery Power: 97% Battery Power Balance (Percentage)
http://maps.google.c
om/maps?f=q&hl=en
&q=22.540103,114.0
82329&ie=UTF8&z=1
6&iwloc=addr&om=1
Latitude: 22.513015
Longitude: 114.057235
Google Maps Web Link with Latitude and
L
ongitude. Click on the link to get the
location.
If your mobile cannot visit HTTP websites, input the latitude and longitude into Google Maps as the following
picture shows to get the position:
Copyright © 2014 Meitrack Group All rights reserved.
- 7 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 8 - of 22
Revision:
V1.5
Confidential:
External Documentation
More SMS commands
You can configure T3 by mobile phone or by computer using the MEITRACK Parameter Editor.
For more details, please refer to part 6.5 Configure by Computer.
Note:
1. Password is 4 digits only and defaulted as 0000. You can change the password by using the Parameter Editor
and SMS command.
2. T3 will only accept commands and send SMS report from a user with the correct password.
If preauthorized phone number was set, only this phone number can receive SMS reports.
6.4.1 Multiple Phone numbers– A71
Command: 0000, A71, phone number 1, phone number 2, phone number 3
SMS Get: IMEI, A71, OK
Note:
Authorize a phone number for SOS alarm, calling for location report, geo-fence alarm, and low battery alarm.
Phone Number: Max 16 characters.
If no preset phone number, it is empty (default is empty).
Send command “0000, A71” to delete all phone numbers.
When the SOS button is pressed, T3 will make a call to phone number 1, 2 and 3. It will stop calling when one
number answers.
Example: 0000,A71,13811111111,13822222222,13833333333
SMS Get: 353358017784062,A71,OK
6.4.2 Listening-in (Voice Monitoring)–A72
Command: 0000, A72, phone number 1, phone number 2
SMS Get: IMEI, A72, OK
Copyright © 2014 Meitrack Group All rights reserved.
- 8 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 9 - of 22
Revision:
V1.5
Confidential:
External Documentation
Note:
Authorize a phone number to make a silent call to the tracker. The tracker will answer the call automatically and
allows the caller to listen to what is happening around the tracker. There is no sound when the tracker is working.
Phone Number: 2 monitoring numbers at the most can be set, 16 characters per number.
If no preset phone number, it is empty (default).
If no phone number, but has “,”, the number related to this “,” is deleted.
Send command “0000, A72” to delete all phone numbers.
Example: 0000,A72,13844444444,13855555555
SMS Get: 353358017784062,A72,OK
6.4.3 Sleep Mode – A73
Command: 0000,A73,X
SMS Get: IMEI,A73,OK
Note:
This setting is for power saving.
X=0, turn off sleep mode (default)
X=1, normal sleep. GSM module work, GPS/GLONASS module work by sleep mode intermittently. The device can
work 25% longer than no sleep mode. Note: this is not recommended for users who set “track by interval” or
short time interval, because it will affect the completeness of tracking.
X=2, deep sleep, the tracker will enter this mode after it is inactive or stationary(No SOS/any triggered by the
button/input/incoming calls/message/movement) for 5 minutes. GPS/GLONASS module stops working and GSM
module enters sleep mode. The tracker remains in this mode until it is activated by SOS/any triggered by the
button/input/incoming calls/message/movement. After that, it will repeat above processes.
Note: In any condition, the device will directly quit the sleep mode and back to normal working mode by SMS or
GPRS command to turn off the sleep mode.
Example: 0000,A73,2
SMS Get: 353358017784062,A73,OK
6.4.4 Geo-fence Alarm – B05
Command: B05,P,latitude,longitude,radius,in,out
SMS Get: IMEI,B05,OK
Note:
P: 1 to 8. Max 8 Geo-fence waypoints can be set.
Latitude: Latitude in decimal degrees of the waypoint center.
Longitude: Longitude in decimal degrees of the waypoint center.
Radius: [1, 4294967295] in meters.
In = 0, turn off the alarm when the tracker enters the waypoint;
In = 1, turn on the alarm when the tracker enters the waypoint.
Out = 0, turn off the alarm when the tracker exits the waypoint;
Copyright © 2014 Meitrack Group All rights reserved.
- 9 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 10 - of 22
Revision:
V1.5
Confidential:
External Documentation
Out = 1, turn on the alarm when the tracker exits the waypoint.
Example: 0000,B05,1,22.91319,114.07988,1000,0,1
SMS Get: 353358017784062,B05,OK
Once the tracker goes outside of the circle (center: 22.91319,114.07988 and radius 1000 meters), the following
message will be received.
353358017784062,ExitGEO,22.918186,114.089823,080229123816,A,10,22,16,32,1,21,6667,850,,0000,,
6.4.5 Time Zone– B35
Command: 0000,B35,T
SMS Get: IMEI,B35,OK
Note:
Default time of the tracker is GMT. You can use this command to change the time on your tracker to your local
time. This command is for SMS tracking only.
Time zone of SMS report is separated with that of GPRS data. If you need to set time zone in GPRS data, please
use SMS command: 0000, B36, T
T=0, to turn off this function.
T=[-32768,32767] to set time difference in minutes to GMT.
For those ahead of GMT, just input the time difference in minutes directly. For example, GMT+8,
W000000,032,480
‘-‘is required for those behind GMT. For example, W000000,032,-120.
Example: 0000,B35,480
SMS Get: 353358017784062,B35,OK
For more details regarding SMS commands, please refer to MEITRACK SMS Protocol.
6.5 Configure by Computer
This part mainly shows you how to use the MEITRACK Parameter Editor.
Note: Don’t connect T3 to external battery when configuring.
Please refer to the MEITRACK Parameter Editor User Guide for more information regarding configuration and
functions.
Run ‘PL2303_Prolific_DriverInstaller’ to install the driver for the USB data cable.
Note: PL2303_Prolific_DriverInstaller is in the folder ‘USB-232 Driver’ in the CD.
Connect the USB Data Cable between T3 and PC.
Copyright © 2014 Meitrack Group All rights reserved.
- 10 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 11 - of 22
Revision:
V1.5
Confidential:
External Documentation
Open Device Manager (Device Manager is under Control Panel\System and Security\System). You can then find
‘Prolific USB-to-Serial Comm Port’ as the following picture shows.
Note: Remember this Com number. It needs to be input into the MEITRACK Parameter Editor. It is COM3 in this
example and it would be COM4 or COM5… in your computer.
Run ‘MEITRACK Parameter Editor.exe’ and the following configuration window will pop up:
Copyright © 2014 Meitrack Group All rights reserved.
- 11 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 12 - of 22
Revision:
V1.5
Confidential:
External Documentation
Choose the correct Com number and terminal type in previous Device Manager then click the ‘Open Port’ button.
Click ‘Read Settings’ button to show the default or previous settings of the tracker.
Note: MEITRACK Parameter Editor is in the CD. The language will be automatically adjusted to be the same as
your PC operation system’s language. Please use “Ctrl+L” to change the language.
6.5.1 SMS Tracking
6.5.1.1 Track by Preset Interval
Click Tap I: SMS Tracking
Item Description
User Password SMS password for sending SMS commands and defaulted as 0000.
Phone Number A phone number to receive SMS location reports.
SMS Report Interval Track by time interval via SMS.
Set time interval for SMS location report.
= 0, stop tracking by time interval (default);
= [1,65535], track by interval in minute.
Auto Report Times = 0, unlimited times for report.
= [1,255], it will stop reporting when reaching preset times
Read Read current tracker’s settings for above items.
Write Write above settings to the tracker.
6.5.1.2 SMS Report
Click Tap V: Authorization
Copyright © 2014 Meitrack Group All rights reserved.
- 12 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 13 - of 22
Revision:
V1.5
Confidential:
External Documentation
Item Description
Authorization Phone A phone number to receive selected event’s SMS reports.
Event Selected event’s SMS reports will be sent to the authorized phone
number.
For more details, please refer to MEITRACK GPRS/SMS Protocol.
For description of events from SOS/Input 1 Active to Tow Alarm,
please refer to tap II GPRS Tracking.
Other events description, please refer to below chart.
Read Read current tracker’s settings for above items.
Write Write above settings to the tracker.
Event Description:
Event Description
(If the box is ticked, authorized phone number will get event report
by SMS or calling)
SOS/Input 1 Active Report when input1 (SOS) is active/pressed.
Input 2 Active Report when input 2 is active.
Input 3 Active Report when input 3 is active.
SOS/Input1 Inactive Report when input 1 inactive (SOS released).
Input 2 Inactive Report when input 2 inactive.
Copyright © 2014 Meitrack Group All rights reserved.
- 13 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 14 - of 22
Revision:
V1.5
Confidential:
External Documentation
Input 3 Inactive Report when input 3 inactive.
Low Battery Report when backup battery’s voltage is below 3.5V.
Low External Power External power (car battery) is lower than predefined voltage.
You can define voltage in Main Settings.
Speeding Report when T3 speeds higher than the pre-set value.
Value can be changed on tap III Main Settings
Enter Geo-fence Report when T3 enters Geo-fence.
Exit Geo-fence Report when T3 exits Geo-fence.
Geo-fence can be changed on tap III Main Settings.
External Power On Alarm when external power supply is on or recover.
External Power Off Alarm when external power supply if off or cut.
No GPS/GLONASS Signal Report when T3 enters GPS/GLONASS blind area or no GPS/GLONASS
signal.
Get GPS/GLONASS Signal Report when T3 exits GPS/GLONASS blind area or get GPS/GLONASS
signal.
Enter Sleep Report when T3 enters sleep mode.
Exit Sleep Report when T3 exits sleep mode.
Sleep mode can be changed on tap III Main Settings.
GPS/GLONASS Antenna Cut Alarm when the GPS/GLONASS antenna is disconnected or cut
Device Reboot Report when T3 is rebooting.
Heartbeat Report Turn on heartbeat report
You can define heartbeat interval on tap III Main Settings.
Heading Change Report Auto report when T3’s direction changes over predefined angle
You can define angle degree on tap III Main Settings.
Distance Interval Report Track by distance.
Interval can be changed on tap III Main Settings.
Tow Alarm Alarm when the tracker trembles for a period of time.
You can define tow time on tap III Main Settings.
Press Input 1 (SOS) to call Make a call to authorized phone number when press input 1 (SOS).
Press Input 2 to call Make a call to authorized phone number when press input 2.
Press Input 3 to call Make a call to authorized phone number when press input 3.
Reject Incoming Call Hand up automatically incoming call from correspondent authorized
phone number.
Call for SMS Location Report Reject incoming call or report SMS location when no answer.
Auto Answer Incoming Call Auto answer the incoming call for conversation
Listen-in (voice monitoring) Auto answer the incoming call for voice monitoring
6.5.2 GPRS Tracking
Click Tap II: GPRS Tracking
Copyright © 2014 Meitrack Group All rights reserved.
- 14 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 15 - of 22
Revision:
V1.5
Confidential:
External Documentation
Item Description
GPRS Select TCP/UDP to enable GPRS communication.
GPRS Interval Track by time interval via GPRS.
Set time interval for GPRS tracking.
Interval is in unit of 10 seconds.
Interval = 0, stop tracking by time interval.
Max time interval = 65535*10 seconds
GPRS Report Times = 0, report without limit.
= [1,65535], set report times, T3 will stop reporting when reaching the
times.
IP & Port Input server’s IP address and port number.
Secondary IP and Port
(Backup Server)
Input backup server’s IP address and port number to avoid data losing
when main server is down. The backup server will receive data
automatically.
APN
APN user name
APN password
APN, APN username, APN password: max 32 bytes.
If no username and password required, leave them blank.
Copyright © 2014 Meitrack Group All rights reserved.
- 15 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 16 - of 22
Revision:
V1.5
Confidential:
External Documentation
Tracker ID T3’s IMEI. It is the only ID in GPRS packet.
Read Read current tracker’s settings for above items.
Write Write above settings to the tracker.
Tick the box for receiving GPRS report.
Event Description:
Event Description(If the box is ticked, authorized phone number will get
event report by SMS or calling)
SOS/Input 1 Active Report when input1 (SOS) is active/pressed.
Input 2 Active Report when input 2 is active.
Input 3 Active Report when input 3 is active.
SOS/Input1 Inactive Report when input 1 inactive (SOS released).
Input 2 Inactive Report when input 2 inactive.
Input 3 Inactive Report when input 3 inactive.
Low Battery Report when backup battery’s voltage is below 3.5V.
Low External Power External power (car battery) is lower than predefined voltage.
You can define voltage in Main Settings.
Speeding Report when T3 speeds higher than the pre-set value.
Value can be changed on tap III Main Settings
Enter Geo-fence Report when T3 enters Geo-fence.
Exit Geo-fence Report when T3 exits Geo-fence.
Geo-fence can be changed on tap III Main Settings.
External Power On Alarm when external power supply is on or recover.
External Power Off Alarm when external power supply if off or cut.
No GPS/GLONASS Signal Report when T3 enters GPS/GLONASS blind area or no GPS/GLONASS
signal.
Get GPS/GLONASS Signal Report when T3 exits GPS/GLONASS blind area or get GPS/GLONASS
signal.
Enter Sleep Report when T3 enters sleep mode.
Exit Sleep Report when T3 exits sleep mode.
Sleep mode can be changed on tap III Main Settings.
GPS/GLONASS Antenna Cut Alarm when the GPS/GLONASS antenna is disconnected or cut
Device Reboot Report when T3 is rebooting.
Heartbeat Report Turn on heartbeat report
You can define heartbeat interval on tap III Main Settings.
Heading Change Report Auto report when T3’s direction changes over predefined angle
You can define angle degree on tap III Main Settings.
Distance Interval Report Track by distance.
Interval can be changed on tap III Main Settings.
Tow Alarm Alarm when the tracker trembles for a period of time.
You can define tow time on tap III Main Settings.
Copyright © 2014 Meitrack Group All rights reserved.
- 16 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 17 - of 22
Revision:
V1.5
Confidential:
External Documentation
For more information about GPRS settings, please refer to MEITRACK SMS/GPRS Protocol.
7Installation
7.1 Install I/O Cable
The I/O cable is a 12-pin cable including power, analog input, negative/positive input and output.
1
Power (+)
3
Input 1
5
Input 2
7
Input 3
9
AD Input 2
11
Output 2
2
GND (-)
4
GND (-)
6
GND (-)
8
AD Input 1
10
Output 1
12
Output 3
PIN Number Color Description
1 (Power+) Red DC In (power source). Input voltage: 9V~36V. 12V suggested.
2 (GND) Black Ground.
3 (Input 1) White Digital Input 1 (negative triggering). Defaulted as SOS.
4 (GND) Black GND, connecting to input 1 to be SOS button.
5 (Input 2) White Digital Input 2 (negative triggering), for detecting status of vehicle door.
6 (GND) Black Ground, for connecting to analog senor.
7 (Input 3) White Digital Input 3 (positive triggering).
8 (AD Input 1) Blue 10 Bits Resolution Analog Inputs. 0~6V DC Detection. It can be used to connect
with temperature/fuel sensor etc.
9 (AD Input 2) Blue 10 Bits Resolution Analog Inputs. 0~6V DC Detection. It can be used to connect
with temperature/fuel sensor etc.
10 (Output 1) Yellow Output1. It can be used to connect with relay for engineer immobilization.
Low voltage (0V) when effective and open collector (OC) when ineffective.
Output open collector sink voltage (ineffective): 40V max.
Output low voltage sink current (effective): 400mA max.
11 (Output 2) Yellow Output2. It can be used to connect with relay for engineer immobilization.
Low voltage (0V) when effective and open collector (OC) when ineffective.
Output open collector sink voltage (ineffective): 40V max.
Output low voltage sink current (effective): 400mA max.
12 (Output 3) Yellow Output3. It can be used to connect with relay for engineer immobilization.
Copyright © 2014 Meitrack Group All rights reserved.
- 17 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 18 - of 22
Revision:
V1.5
Confidential:
External Documentation
Low voltage (0V) when effective and open collector (OC) when ineffective.
Output open collector sink voltage (ineffective): 40V max.
Output low voltage sink current (effective): 400mA max.
7.1.1 Power/GND (PIN1/PIN2)
Connect GND (-Black) and Power (+Red) wires to the battery of vehicle.
7.1.2 Digital Input (PIN3/PIN5 Negative Triggering)
7.1.3 Digital Input (PIN7 Positive Triggering)
T3
T3
T3
Copyright © 2014 Meitrack Group All rights reserved.
- 18 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 19 - of 22
Revision:
V1.5
Confidential:
External Documentation
7.1.4 Output (PIN10/PIN11/PIN12)
7.1.5 Analog Input (PIN8/PIN9)
7.1.5.1 Analog Input Application 1– Detect External Power Voltage
Input range：0-6V
Voltage Caculating Formula: input voltage=(AD*3.3*2)/4096
0x0C9B=>3227(Decimal)=>(3227*3.3*2)/4096=5.1997V(Voltage)
0x0D9D=>3845(Decimal)=>(3845*3.3*2)/4096=5.6154V(Voltage)
7.1.5.2 Analog Input Application 2 – Fuel Detection (percentage of fuel)
Note:
Fuel level sensors supplied by our company are resistance-type sensors with output resistance: 0-200Ω
(ohm).
For the circuit shown on above figure, if VCC is 12V, R should be 200Ω (ohm) and if VCC is 24V then R should
be 600Ω (ohm) to make the input range to AD1 or AD2 is 0-6V.
Below formula is for calculating the fuel percentage left for this fuel level sensor:
T3
T3
Copyright © 2014 Meitrack Group All rights reserved.
- 19 -

File Name:
MEITRACK GLONASS/GPS VEHICLE
TRACKER User Guide
Creator:
Cavana Cheung
Project:
T3
Creation Date:
Update Date:
2013-3-15
2013-06-26
Sub Project:
User Guide
Page:
- 20 - of 22
Revision:
V1.5
Confidential:
External Documentation
The value must be converted into decimal, for example, 0x0313 is 787 in decimal.
7.2 Install Handset Phone (RS232 Interface)
PIN Number Color Description
1 Red Power Output. Output Voltage: 5V
2 Black Ground
3 Orange Handset Phone RS232 TX (T3 RX)
4 Yellow Handset Phone RS232 RX (T3 TX)
5 Blue Microphone Positive
6 Green Microphone Negative
7 Purple Speaker Positive
8 White Speaker Negative
Note: This interface also supports RFID reader. It only can be used to connect to handset or RFID reader at the
same time.
7.3 Install RFID Reader (RS232 Interface)
PIN Number Color Description
1 Red Power Output. Output Voltage: 5V
Percentage Left = * 100%
1.1*AD value
4096* 2 – 1.1*AD value
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Copyright © 2014 Meitrack Group All rights reserved.
- 20 -