MeiTrack MVT100 User manual

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2011-01-22
Sub Project:
User Guide
Page:
1 of 7
Revision:
V1.04
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
MEITRACK® MVT100
USER GUIDE

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2011-01-22
Sub Project:
User Guide
Page:
2 of 7
Revision:
V1.04
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
Table of Contents
1. Copyright and Disclaimer.................................................................................................................................. 3
2. Applications ...................................................................................................................................................... 3
3. Features ............................................................................................................................................................ 3
4. Hardware Installation........................................................................................................................................ 4
4.1 MVT100 and its Accessories ............................................................................................................... 4
4.2 Install SIM Card ................................................................................................................................... 4
4.3 Install I/O Cable................................................................................................................................... 5
5. Mount the MVT100 unit ................................................................................................................................... 6
6. LED Indications.................................................................................................................................................. 7
7. Unit Configuration ............................................................................................................................................ 7

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2011-01-22
Sub Project:
User Guide
Page:
3 of 7
Revision:
V1.04
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
1. Copyright and Disclaimer
Information in this user guide may be changed at any time without prior notification.
This user guide nor any parts thereof may not be reproduced for any purpose whatsoever without the written
consent of Meiligao (MEITRACK), nor transmitted in any form either electronically or mechanically, including
photocopying and recording.
In no event shall Meiligao (MEITRACK) be liable for direct, indirect, special, incidental, or consequential damages
(including but not limited to economic loss, personal injury, and loss of asset and property) arising out of the use
or inability or illegality to use the product or documentation.
2. Applications
Motorcycle Real Time Tracking
Car Security/Anti-Hijack
Fleet Management
3. Features
SiRF III GPS and Quad Band GSM 850/900/1800/1900Mhz
AGPS ( with GSM Base Station ID)
Designed to be a Part of Motorcycle
Waterproof (IP66)
Inbuilt GPS and GSM Antenna
Track by SMS/GPRS (TCP/UDP) (MEITRACK Protocol)
Track on Demand
Track by Time Interval
Track by Distance Interval
Track on Mobile Phone
Internal 4Mb Memory for Logging
Inbuilt Motion Sensor
850mAh Internal Backup Battery
SOS Alarm
Geo-fence Alarm
GPS Blind Area Alarm
Low Battery Alarm
Speeding Alarm
Impact Alarm
Tow Alarm
External Power Cut Alarm
Mileage Report
Engine Cut (Engine immobilization)

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2011-01-22
Sub Project:
User Guide
Page:
4 of 7
Revision:
V1.04
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
Inbuilt Super Magnet (optional)
I/O: 2 Digital Input (1 negative triggering and 1 positive triggering), 1 Analog Input Detection, 1 Output
4. Hardware Installation
4.1 MVT100 and its Accessories
MVT100 Main Unit with Battery and I/O Cable
SOS Button
USB Data Cable
3M Sticker
Screws
CD
4.2 Install SIM Card
Check that the SIM has not run out of credit (test the SIM in a phone to make sure it can send and receive SMS);
Check that the SIM Lock code is turned off;
If you require the function of sending an SMS location report to the authorized phone number when it makes a
call to the MVT100, please make sure the SIM installed supports displaying caller ID.
Before installing the SIM card, turn off the power for MVT100.
Unscrew and remove cover.
Insert the SIM card by sliding it into the card holder with the chip module facing to the connectors on PCB.
Put back the cover and screw it up.

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2011-01-22
Sub Project:
User Guide
Page:
5 of 7
Revision:
V1.04
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
4.3 Install I/O Cable
The I/O cable is a 8-pin cable including power, analog input, negative input, output and USB port for
configuration.
PIN
Color
Description
Power
Red
DC In (power source). Input voltage: 9V~36V. 12V suggested.
GND
Black
Ground
Input
White
Digital Input (negative triggering). Socket for SOS panic button
GND
Black
Ground
AD
Blue
10 Bits Resolution Analog Input. 0~6V DC Detection
Out
Yellow
Output. Low voltage (0V) when effective and open drain when
ineffective.
Output open drain sink voltage (ineffective): 45V max.
Output low voltage sink current (effective): 200mA max.
USB Port
(For Configuration Only)
Green
TTL232 Rx (MVT100 Tx)
Orange
TTL232 Tx (MVT100 Rx)
Black
Ground
Input
Purple
Digital Input2 (positive triggering)
Installation/Connection Examples:
1) Power/GND
Connect GND (-Black) and Power (+Red) wires to the battery of vehicle.
2) Digital Input (Negative Triggering)

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2011-01-22
Sub Project:
User Guide
Page:
6 of 7
Revision:
V1.04
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
3) Output
4) Analog Input
Note:
Fuel level sensors supplied by us are resistance-type sensors with output resistance: 0-200Ω (ohm).
For the circuit shown on above figure, if VCC is 12V, R should be 200Ω (ohm) and if VCC is 24V then R should
be 600Ω (ohm) to make the input range to AD1 or AD2 is 0-6V.
Below formula is for calculating the fuel percentage left for this fuel level sensor:
The value must be converted into decimal, for example, 0x0267 is 615 in decimal.
5. Mount the MVT100 unit
Three mounting options:
Option 1:
Using 3M sticker
Option 2:
Percentage Left=
=
* 100%
AD value
1024 X 2 –AD value

File Name:
MEITRACK MVT100 User Guide
Creator:
Cavana Cheung
Project:
MVT100
Creation Date:
Update Date:
2010-09-09
2011-01-22
Sub Project:
User Guide
Page:
7 of 7
Revision:
V1.04
Confidential:
External Documentation
Copyright © 2010 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
Using Screws
Option 3:
Using internal super magnet
6. LED Indications
Press and hold the Power Key for 3~5 seconds to turn on/off MVT100.
GPS LED (Blue)
On
One button is pressed or input is active.
Flashing ( every 0.1 second)
Initializing
Flashing (0.1 second on and 2.9 seconds off)
MVT100 has a GPS fix
Flashing (1 second on and 2 seconds off)
MVT100 has no GPS fix
GSM LED (Green)
On
One call is coming in / one call is being made
Flashing ( every 0.1 second)
Initializing
Flashing (0.1 second on and 2.9 seconds off)
MVT100 is connected to the GSM network
Flashing (1 second on and 2 seconds off)
MVT100 is not connected to the GSM network
7. Unit Configuration
Connect the USB Data Cable between MVT100 and PC and use MEITRACK Parameter Editor to configure the
MVT100.
Please refer to MEITRACK Parameter Editor User Guide for more information regarding configuration and
functions.
Please refer to MEITRACK SMS/GPRS Protocol for more information regarding SMS and GPRS commands.