MeiTrack MVT100 User manual

MEITRACK MVT100 User Guide
MEITRACK MVT100 User Guide

MEITRACK MVT100 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 2 -
Change History
File Name
MEITRACK MVT100 User Guide
Created By
Renny Lee
Project
MVT100
Creation Date
Update Date
2010-08-30
2015-01-07
Subproject
User Guide
Total Pages
14
Version
V5.2
Confidential
External Documentation

MEITRACK MVT100 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 3 -
Contents
1 Copyright and Disclaimer...............................................................................................................................................................- 4 -
2 Product Overview ..........................................................................................................................................................................- 4 -
3 Product Function and Specifications .............................................................................................................................................- 4 -
3.1 Product Function ................................................................................................................................................................- 4 -
3.1.1 Location Tracking .....................................................................................................................................................- 4 -
3.1.2 Anti-Theft.................................................................................................................................................................- 4 -
3.1.3 Other Functions .......................................................................................................................................................- 4 -
3.2 Specifications......................................................................................................................................................................- 5 -
4 MVT100 and Accessories...............................................................................................................................................................- 5 -
5 Appearance....................................................................................................................................................................................- 6 -
6 First Use.........................................................................................................................................................................................- 6 -
6.1 Installing the SIM Card........................................................................................................................................................- 6 -
6.2 Charging..............................................................................................................................................................................- 6 -
6.3 Indicator..............................................................................................................................................................................- 7 -
6.4 Configured on a Computer .................................................................................................................................................- 7 -
6.5 Location Tracking ................................................................................................................................................................- 8 -
6.5.1 Tracking on a Mobile Phone.....................................................................................................................................- 8 -
6.5.2 Setting a Combined Function Phone Number –A71 ...............................................................................................- 9 -
6.5.3 Setting the Smart Sleep Mode –A73 .....................................................................................................................- 10 -
7 MS02 Tracking System .................................................................................................................................................................- 10 -
8 Installing the MVT100..................................................................................................................................................................- 11 -
8.1 Installing an I/O Cable.......................................................................................................................................................- 11 -
8.2 Installation/Connection Diagram......................................................................................................................................- 12 -
8.2.1 Power Cable/Ground Wire (PIN1, PIN2) ................................................................................................................- 12 -
8.2.2 Digital Input 1 (PIN4, Negative Triggering/SOSButton) ..........................................................................................- 13 -
8.2.3 Digital Input 2 (PIN5, Positive Triggering) ..............................................................................................................- 13 -
8.2.4 Output (PIN7).........................................................................................................................................................- 13 -
8.2.5 Voltage Formula for the Built-in Battery and Extenal Power Supply......................................................................- 13 -
8.2.6 Analog Input (PIN6)................................................................................................................................................- 13 -
8.3 Mounting the MVT100 .....................................................................................................................................................- 13 -

MEITRACK MVT100 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 4 -
1Copyright and Disclaimer
Copyright © 2015 MEITRACK. All rights reserved.
and are trademarks that belong to Meitrack Group.
The user manual may be changed without notice.
Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any
purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and recording.
Meitrack Group shall not be liable for direct, indirect, special, incidental, or consequential damages (including but not limited to
economic losses, personal injuries, and loss of assets and property) caused by the use, inability, or illegality to use the product
or documentation.
2Product Overview
The MVT100 is a vehicle tracker that can be used for cars, motorcycles, yachts, and boats. The MVT100’s unique design makes
its appearance cool. The product is easy to install, waterproof (IP66), dustproof, and has built-in antenna. Once installed on a
vehicle, the MVT100 is hard to be noticed. Whenever typhoon or rainstorm approaches, the MVT100 can work properly.
3Product Function and Specifications
3.1 Product Function
3.1.1 Location Tracking
GPS + GSM dual-module tracking
Real-time location query
Scheduled tracking
Track by distance
Track on a mobile phone
Speeding alarm
Direction change report
3.1.2 Anti-Theft
SOS alarm
Polygon geo-fence
External power supply cut-off alarm
GPS blind spot alarm
Low power alarm
Remote vehicle fuel/power cut-off alarm
Towing alarm
Engine or vehicle door status alarm
3.1.3 Other Functions
SMS/GPRS (TCP/UDP) communication (Meitrack protocol)

MEITRACK MVT100 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 5 -
Built-in 8 MB chip for recoding driving routes
Waterproof (IP66)
Mileage report
Support for Over-the-Air (OTA)
Built-in standby battery
Smart power saving mode
3.2 Specifications
Item
Specifications
Dimension
110 mm x 72 mm x 39 mm
Weight
170g
Input voltage
DC 11 V to 36 V/1.5 A
Standby battery
850 mAh/3.7 V
Power consumption
65 mA standby current
Operating temperature
-20°C to 55°C
Humidity
5% to 95%
Working hour
43 hours in power-saving mode and 10 hours in normal mode
Indicator
2 indicators showing GSM and GPS status
Button/Switch
1 SOS button (for sending SMSs)
1 power button (next to the SIM card slot)
Memory
8 MB byte
Sensor
3D acceleration sensor (for vibration, wake-up, and towing alarms)
GSM frequency band
GSM 850/900/1800/1900 MHz
GPS sensitivity
-161 dB
Positioning accuracy
10m
I/O port
2 inputs (1 negative input and 1 positive input)
1 analog detection input
1 output
1 USB port
4MVT100 and Accessories
MVT100 and standard accessories:
MVT100 with a battery, I/O
cable, and SOS button
3M sticker
Screws
USB cable
CD

MEITRACK MVT100 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 6 -
5Appearance
MVT100
I/O port cable
USB port
SOS
button
6First Use
6.1 Installing the SIM Card
Pay attention to the following items before installing the SIM card:
Ensure that the SIM card has sufficient balance.
Ensure that the phone card PIN lock has been closed.
Ensure that the SIM card in the MVT100 has subscribed the caller ID service if you want to use your authorized phone
number to call the MVT100.
Power off the MVT100 before installing the SIM card.
To install the SIM card, perform the following operations:
1. Loosen the screws, and remove the cover.
2. Insert the SIM card to the slot. Ensure that the card chip is facing up to the Printed Circuit Board (PCB).
3. Close the cover, and tighten the screws.
6.2 Charging
When you use the MVT100 for the first time, connect the MVT100 GND (-Black) and Power (+Red) wires to 12 V or 24 V
external power supply for charging. Ensure that the MVT100 is charged at least three hours. Eight hours are recommended.
The MVT100 can be installed on a vehicle only after it is configured and tested.

MEITRACK MVT100 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 7 -
6.3 Indicator
To start the MVT100, press and hold down the power button for 3s to 5s, or connect the MVT100 to external power supply (11
V to 36 V).
GPS Indicator (Blue)
Steady on
One button is pressed or one input is activated.
Blink (every 0.1s)
The MVT100 is being initialized or the battery power is
low.
Blink (0.1s on and 2.9s off)
A GPS signal is received.
Blink (1s on and 2s off)
No GPS signal is received.
GSM Indicator (Green)
Steady on
A call is coming in or a call is being made.
Blink (every 0.1s)
The MVT100 is being initialized.
Blink (0.1s on and 2.9s off)
A GSM signal is received.
Blink (1s on and 2s off)
No GSM signal is received.
6.4 Configured on a Computer
This section describes how to use MEITRACK Manager to configure the MVT100 on a computer.
Procedure:
1. Install the USB driver and MEITRACK Manager.
2. Connect the MVT100 to a PC by using a USB cable.
3. Run MEITRACK Manager. The following dialog box is displayed:
MEITRACK Manager will automatically detect the device, and the Device tab page for default parameters is displayed.

MEITRACK MVT100 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 8 -
For details about MEITRACK Manager, see the MEITRACK Manager User Guide.
6.5 Location Tracking
6.5.1 Tracking on a Mobile Phone
Make a call to the MVT100 SIM card number. An SMS with a map link will be received.
Click the SMS link. The location is displayed on Google Maps on your mobile phone.
SMS example:
Now,061314 10:36,V,26,0Km/h,96%,http://maps.meigps.com/?lat=22.513781&lng=114.057183
The following table describes the SMS format:
Parameter
Description
Remarks
Now
Indicates the current location.
SMS header: indicates the alarm type.
061314 10:36
Indicates the date and time in
MMDDYY hh:mm format.
None
V
The GPS is invalid.
A = Valid
V = Invalid

MEITRACK MVT100 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 9 -
26
Indicates the GSM signal strength.
Value: 1–32
The larger the value is, the stronger the signal
is. If the value is greater than 12, GPRS
reaches the normal level.
0Km/h
Indicates the speed.
Unit: km/h
96%
Indicates the remaining battery
power.
None
http://maps.meigps.co
m/?lat=22.513781&lng
=114.057183
This is a map link.
Latitude: 22.513781
Longitude: 114.057183
None
If your mobile phone does not support HTTP, enter the latitude and longitude on Google Maps to query a location.
More SMS commands
You can configure the MVT100 on a mobile phone or on a computer by using Meitrack Manager. For details, see section 6.4
"Configured on a Computer."
Note:
1. The default password is 0000. You can change the password by using Meitrack Manager and SMS commands. For details,
see section 6.4 "Configured on a Computer."
2. The MVT100 can be configured by SMS commands with a correct password. After an authorized phone number is set,
only the authorized phone number can receive the preset SMS report.
6.5.2 Setting a Combined Function Phone Number –A71
SMS sending: 0000,A71,Phone number 1,Phone number 2,Phone number 3
SMS Responding: IMEI,A71,OK
Description:
A phone number has a maximum of 16 bytes. Phone numbers are empty by default.
Set phone number 1 to an SOS phone number. When the tracker is called by using the phone number, a location SMS,
geo-fence alarm, and low power alarm are received.
If all combined function phone numbers need to be deleted, send 0000,A71.
When the SOS button is pressed, the tracker dials phone numbers 1, 2, and 3 in sequence. The tracker stops dialing when a
phone number responds.
Example: 0000,A71,13811111111,13822222222,13833333333
Responding: 353358017784062,A71,OK

MEITRACK MVT100 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 10 -
6.5.3 Setting the Smart Sleep Mode –A73
SMS sending: 0000,A73,Sleep level
SMS Responding: IMEI,A73,OK
Description:
When the sleep level is 0 (default value), disable the sleep mode.
When the sleep level is 1, the tracker enters the general sleep mode. The GSM module always works, and the GPS module
occasionally enters the sleep mode. The tracker works 25% longer in the general sleep mode than that in the normal working
mode. The mode is not recommended for users who set the scheduled tracking in a short interval. In this way, the mode will
affect trace integrity.
When the sleep level is 2, the tracker enters the deep sleep mode. If the tracker is not activated (SOS, button changes, calling,
incoming calls, SMSs, or vibration) after five minutes, the GPS module is stopped, and the GSM module enters the sleep mode.
If the tracker is activated, the GPS and GSM modules are waken up.
Note: In any condition, you can use an SMS command to disable the sleep mode, and then the tracker exits the sleep mode and
returns back to the normal working mode.
Example: 0000,A73,2
Responding: 353358017784062,A73,OK
For details about SMS commands, see the MEITRACK SMS Protocol.
7MS02 Tracking System
1. Configure parameters in any of the following ways:
Configured by SMS: Send SMS commands 0000,A21,1,67.203.13.26,8800,APN,APN username,APN password and
0000,A12,6,0 to the MVT100 SIM card number.
Configured by Meitrack Manager: Connect the tracker to a PC, run Meitrack Manager to enter the main screen, and
click the Tracking tab to set parameters.
2. Visit ms02.trackingmate.com, and enter the user name and password. Contact us if you have no account or forget the
password.
3. Go to the map, and choose Manage > Admin.
4. Select a user, and Click Add a New Device.

MEITRACK MVT100 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 11 -
5. Obtain the tracker IMEI number from the packing or Meitrack Manager, register a device, set the parameters shown in
the following figure, and then click Save.
6. Double-click a device in the panel on the right, and check whether data is updated in Status.
8Installing the MVT100
8.1 Installing an I/O Cable
The I/O cable is an 8-pin cable, including the power, analog input, negative input, and output.
1
Power (+)
2
GND (-)
3
GND (-)
4
Input 1 (-)
5
Input 2 (+)
6
AD 1
7
Output 1
8
9
10
USB port
Pin
Color
Description
1 (Power +)
Red
Positive electrode of the power input, connected to the positive
electrode of the vehicle storage battery. Input voltage: 11 V to 36 V.
12 V is recommended.

MEITRACK MVT100 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 12 -
2 (GND)
Black
Ground wire, connected to the negative electrode of the vehicle
storage battery or to the negative terminal.
3 (GND)
Black
Ground wire
It can be used as a ground wire connected to an analog sensor.
4 (Input 1)
White
Digital input, negative triggering
SOS button by default, used for asking for help
When the SOS function is not required, input 1 connects to a door
triggering signal cable to detect vehicle door status. (Most Chinese,
Korean, and Japanese cars are negative edge-triggered.)
5 (Input 2)
Purple
Digital input, positive triggering
Detect the vehicle ACC status by default.
Connects to a door triggering signal cable to detect vehicle door
status. (Most Europe and American cars are positive edge-triggered.)
6 (AD)
Blue
Analog input with 12-bit resolution and valid voltage 0–6.6 V
Connects to an external sensor, such as the fuel sensor.
7 (Output)
Yellow
Valid: low level (0 V)
Invalid: open drain
Maximum voltage for output open drain (invalid): 45 V
Maximum current for output low voltage: 500 mA
Connects to an external relay to remotely cut off the vehicle fuel
cable or engine power supply.
8/9/10 USB port
(for configuration
only)
Green
TTL232 receiving (MVT100 sending)
Orange
TTL232 sending (MVT100 receiving)
Black
TTL232 ground wire
8.2 Installation/Connection Diagram
8.2.1 Power Cable/Ground Wire (PIN1, PIN2)
Connect the power cable (red) and ground wire (black) to the positive and negative electrodes of the vehicle battery
respectively.

MEITRACK MVT100 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 13 -
8.2.2 Digital Input 1 (PIN4, Negative Triggering/SOSButton)
8.2.3 Digital Input 2 (PIN5, Positive Triggering)
8.2.4 Output (PIN7)
8.2.5 Voltage Formula for the Built-in Battery and Extenal Power Supply
Built-in battery input voltage = (AD4 x 3.3 x 2)/4096
Battery percentage = [(AD4 - 2114) x 100/492] x 100%
External power supply input voltage =AD5/4096 x 3.3 x 16
8.2.6 Analog Input (PIN6)
The AD analog input can connect to a sensor whose output voltage ranges from 0 V to 6.6 V.
AD analog voltage = (AD1 x 3.3 x 2)/4096
8.3 Mounting the MVT100
Use any of the following methods to mount the MVT100:
3M sticker
Screw

MEITRACK MVT100 User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 14 -
Built-in super magnet
If you have any questions, do not hesitate to email us at [email protected].