Members Mark ALAMEDA TPGAZ2030 Owner's manual

THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Customer Assistance (spare/replacement parts):1-800-847-7508
or Email: [email protected]
Item Number: 980241176
Model Number:TPGAZ2030
DISCLAIMER: Supplier is fully responsible for the entire content of the assembly
manual, including all Sam’s Club suggested edits or revisions.
Assembly Instructions & User’s Manual
for
Member’s Mark [12'x16'ALAMEDA HARDTOP GAZEBO]
TM

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
2
Table of Contents
Quality Statement ..........................................................................................3
Important Safety Information..........................................................................3
Before Assembly............................................................................................3
Care & Use.....................................................................................................3
Product Information........................................................................................3
Components...................................................................................................4
Hardware........................................................................................................6
Tools...............................................................................................................6
Step 1 – Step 3...............................................................................................7
Warning..................................................................................................18
Danger....................................................................................................18
Care & Use and Storage Instructions.............................................................18
Warranty Information......................................................................................19

Product Information
Product Dimensions:151.57” x 199.61” x 113.78” (385cm x 507cm x 289cm)
Product Weight Capacity: Supports up to 220lbs(100kg)
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
3
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, do not dispose of any
packaging or contents of the shipping carton until assembly is complete.
Use the parts and hardware lists below to identify and separate each of the
pieces included.
The use of power tools for assembly is not recommended. Power tools can
damage the hardware and/or split the wood.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow
these instructions may cause the bolts to misalign during assembly.
Before Assembly
Care & Use
Quality Statement
Important Safety Information
Please read all instructions carefully before assembling this gazebo.
For your safety, assembly by two or more adults is strongly recommended.
Hardware may loosen overtime. Periodically check that all connections are tight.
NOTICE: To prevent injury and property damage from unexpected tipping of
furniture, we highly recommend installation of the anti-tip kit included with this
product.
For cleaning, use a mild detergent solution, rinse with water, and allow to air dry.
Do not use acetone, abrasive, or other special detergents as they would be harmful
to the product’s finish.
Due to the nature of metal, surface oxidation (rusting) will occur if this protective
coating is scratched.
This is a natural process. To minimize this condition, it is recommended that care
be taken when assembling and handling the product in order to prevent the paint
from being scratched.

Short Lintel
AUpper Central
Connector
Lower Central
Connector
1
B1
C
Long Top Bar
Short Top Bar
Top Bar
4
C1 4
D 6
E1 Left Lintel
Right Lintel
4
E2
Connector
4
E3 2
F6
G1 Left Support
Bar
Right Support
Bar
4
G2 4
Components
HConnector 6
ICorner
Connector 4
JPost 4
K
Base
Roof Support
-Left Top
Roof Support
-Right Top
Roof Support
-Left Middle
Roof Support
-Right Middle
Roof Support
--Middle
Roof Support
-Left Bottom
Top
Connector 4
L4
N1 4
N2
O1
O2
O3
P1
4
4
4
4
6
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
4
25.20" / 640mm
25.20" / 640mm
49.41" / 1255mm
49.41" / 1255mm
46.26" / 1175mm
71.45" / 1815mm

Roof Support
-Right Bottom
P2
Top Panel
Cover
Top Panel
Cover
4
Q4
Q1
Mosquito Net
Lintel Cover
4
R 6
S 4
THook
Edge Cover
-Left
Edge Cover
-Right
Edge Cover
1
U4
U1 4
U2 2
(1) Roof Panel
- Left
Roof Panel
- Left
Roof Panel
-Right
Roof Panel
-Right
Roof Panel
-Right
Roof Panel
-Middle
Roof Panel
- Left
4
(2) 4
Components
(3)
(4)
(5)
(6)
(7)
4
4
4
4
4
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
5
71.45" / 1815mm

AA Bolt\Flat Washer
Bolt\Flat Washer\
Nut
M6*15 262
BB Bolt /Plastic Washer
M6*25
Bolt /Plastic Washer
M6*35
24
CC
M6*55
Bolt M6*15
DD
8
8
16
FF
Spacer 24
GG
Hanger 56
HH
Stake 12
II
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Hardware
6
Tools
Part No:EE
Wrench (Included) Allen Wrench (Included) Hammer(Not Included)
Qty: 2Part No:JJ Qty: 1
Safety goggles
(Not Included)
Stepladder
(Not Include d)
Electric drill
(Not Included)
Gloves
(Not Included)
Hardhat
(Not Included)

Bolt\Flat Washer
（M6*15）
J
J
AA
AA
AA
Fig 1
L
L
1-a. Connect the Base (L) and the Post (J) with Bolt\Flat Washer M6*15(AA).
seeFig.1
Step 1
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(AA)
Bolt (M6X15)
Qty: 138
(FF)
Qty: 16
Hanger
(HH)
Qty: 56
(EE)
Wrench
Qty: 1
(KK)
Allen Wrench
Qty: 1
7

E1
E1
E3
E3
E3
E3
E1
E1
E1
H
H
H
H
H
H
F
F
F
E1 E2
E2
E2 E2
AA
AA
AA
AA
AA
AA
E2E2
E2
E2
E2
E2
E3
Fig 2
1-b.
Insert the Hanger (HH) into the track of Right Lintel (E2). Insert the Connector (F) into Left Lintel
(E1)/Right Lintel (E2), at the same time connect it to Left Lintel (E1)/Right Lintel (E2) by the Connector (H)
with Bolt\Flat Washer(AA). Insert the Hanger (HH) into the track of Right Lintel (E2). Insert the Connector (F)
into Left Lintel (E1)/Short Lintel (E3), at the same time connect it to Left Lintel (E1)/Short Lintel (E3) by the
Connector (H) with Bolt\Flat Washer(AA). Insert the Connector (F) into Right Lintel (E2)/Short Lintel (E3), at the
same time connect it to Right Lintel (E2)/Short Lintel (E3) by the Connector (H) with Bolt\Flat Washer(AA).
See Fig.2.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
8
HH
HH
HH
×12PCS
HH
×16PCS

E1
E1/E2
E1/E2
G1
G2
J
J
J
J
E2
FF
AA
Fig 3 Fig 4
E3
1-c. Attach the Lintel (E2/E1) to Post (J) with Bolt\Flat Washer M6*15(AA).
See Fig.3.
At
Attach the Support Bar (G1/G2) to Lintel (E1/E2) and Post (J) with Bolt\Flat Washer M6*15
(AA).See Fig.5.
tach the Lintel (E2/E1) to Post (J) with Bolt M6*15(FF) .See Fig.4.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
9
E1
E1
E1
E1
E1
E1
E1
G1
G1
G1
G1
G2
G2
G2
G2
J
J
J
J
J
J
J
E2
E2
E2
E2
E2
E2
E2
FF
AA
AA
Fig 6
Fig 8 Fig 9
Fig 7
E3
E3
E1
G1
J
AA
Fig 5
E1
K
J
E2
AA

E1
E1
E1
E1
J
J
J
E2
E2
E2
E2
E3
E3
1-e. Attach the Left Suppor t Bar (G1) to Left Lintel (E1) and Post (J) with Bolt\Flat Washer M6*15(AA);
attach theRight Support Bar (G2) to Right Lintel (E2) and Post(J) with Bolt\Flat WasherM6*15(AA).Attach
the top Connector (K) to Post (J) with Bolt\Flat Washer M6*15(AA) .See Fig.8-9.
1-d. Attach the Right Lintel (E2) and Left Lintel(E1) to Post (J) with Bolt\Flat Washer M6*15(AA). Attach the
Right Lintel (E2) and Le ft Lintel (E1) to Post (J) with Bolt M6*15 (FF). See Fig.6-7.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
10
Equal diagonal distance
Fig 10 Fig11
E1/E3
I
R
E1
E3/E2
E2
Step 2
1-f . Attach the Corner Connector (I) to the Right Lintel (E2) and Left Lintel (E1) with Bolt\
Flat Washer M6*15(AA).Attach the Corner Connector (R) to the Left Lintel (E1) and Lintel (E3)
with Bolt\Flat Washer M6*15(AA).
Attach theCorner Connector (R) to the Lintel (E3) and Right
Lintel (E2) with Bolt\Flat Washer M6*15(AA).See Fig.10-11.
AA AA
(AA)
Bolt\Flat Washer\Nut
(M6X55)
Qty: 96
(DD)
Qty: 8
(EE)
Wrench
Qty: 2
Bolt\Flat Washer
（M6*15）

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
2-a . Insert the Top Bar (C1) into Long Top Bar (C) and connect with Bolt\Flat Washer M6*15(AA)
See Fig.12
Fig.12
C1
C
AA
11
B
B
C
CAA
AA
C
C
C1
C
C
C1
C1
C1 B
C
C
C
H
H
H
H
E1
E1
C
CC
C1
C1
E1
E1
E2
E2
E2
E2
E3
E3
Fig.13
2-b. Attach Long Top Bar (C) to Lower Central Connector (B) with Bolt\Flat Washer M6*15(AA),attach Top Bar
(C1)toTop Connector (K) with Bolt\Flat Washer\Nut (DD), using the same method to attach others. See Fig.13.
DD
K
J

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
12
E1
E1/E3
E2
E1
E1
E1
E2
E2
E2
E2 DD
D
D
D
E3
E3
AA
C
D
B
C
C
H
C
c. Attach Short Top Bar (D) to Lower Central Connector (B) with Bolt\Flat Washer M6*15(AA),
attach Short Top Bar (D) to Connector (H) with Bolt\Flat Washer M6*15(AA), using the same method to
attach others. See Fig.14
Fig.14
D
D
D
AA D
C
B
D
B
C
C
D
AA
A

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
13
Fig.15
Fig.16
AA
T
D
C
CB
AA
C
C
B
AD
D
D
D
O1
O1
D
N1
C
N2
O2
O2
D
AA
N2
O3
N2
O2
O3
AA
AA
C
C
N2
N1
C
N1
D
D
C
O1
D
AA CAA
AA
N2
O3
N1
D
AA
C
AA
AA
D
AA
N2
N1
N1
C
AA
2-e.Attach the Roof Supports-Left Top (N1) /Roof Supports-Right Top (N2) / Roof Supports- Left Middle
(O1) / Roof Supports-Right Middle (O2) to the Long Top Bar (C) with Bolt/Flat Washer M6*15(AA）.
Attach the Roof Supports-Left Top (N1) /Roof Supports-Right Top (N2) / Roof Supports- Left Middle
(O1) / Roof Supports-Right Middle (O2) /Roof Supports- Middleto
the Shrot Top Bar (D) with Bolt\Flat
Washer M6*15(AA).See Fig.16.
Attach Upper Central Connector (A) to Lower Central Connector (B) with Bolt\Flat Washer
M6*15 (AA).at the same time screw the Hook (T) to the Upper Central Connector (A) and twist
to tighten .See Fig.15.

DD
D
D
C1
C1
C1
C
C
C
C
C1
P1
O3
O3
P1
P1
P1
P2
P2
P2
P2
AA
P1
P2/O3
D
AA
AA
P2
P1
C1
AA
Fig.17
Attach Roof Panel-Left Bottom (P1) to Top Bar (C1)/Short Top Bar (D) with Bolt\Flat
with Bolt\Flat WasherM6*15 (AA). Attach Roof Panel-Middle (O3) to Short Top Bar (D)
with Bolt\Flat Washer M6*15 (AA). See Fig.17.
Step 3
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
(BB)
Bolt \Plastic Washer (M6X25) Bolt \Plastic Washer (M6X35)
Qty: 24
(GG)
Spacer
Qty: 24
(CC)
Qty: 8
(EE)
Wrench
Qty: 1
14
(AA)
Bolt\Flat Washer(M6X15)
Qty: 28
Washer M6*15(AA). Attach Roof Panel-Right Bottom (P2) to Top Bar (C1)/Short Top Bar (D)

Illustration 1
IMPORTANT:
●Make sure each screw installed on this step is attached to a spacer (GG).
●Wait at the end of the installation of the roof panels before tightening all screws.
If you do not wait and tighten from the beginning, you will not be able to correctly
install all the roof panels.
4
1
6
235
7
7
1
6
4
35
2
BB
6
7
3
6
5
4
U2
7
J
U
U1 U
U1 J
J2
1
5
4
3
2
1
GG
O1/D/O2/O3
S
Plastic Washer
ee Fig.18
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
Illustration 2
15
3-a. Install the roof panel starting from left to right.
Attach all the roof panels show as Fig. to (O1/D/O2/O3) with a Bolt /Plastic Washer M6*25(BB)
and Spacer (GG). Repeat on each side. See Fig.18
Tighten all bolts (BB).

Plastic Washer
c. Place Top Panel Cover (Q)/(Q1) on the top of Top Bar (C)/(C1) and then insert Top Panel Cover
(Q) into the gap between Upper Central Connector (A) and Long Top Bar (C). Then attach Top Panel
Cover (Q)/(Q1) to Top Bar (C)/(C1) with Bolt /Plastic Washer M6*35(CC). See Fig.20-21
Fig.20
Fig.19
M6*15(AA), Connect Edge Cover-Middle to Short Lintel (E3) with Bolt\Flat Washer M6*15(AA).
3-b.Connect Edge Cover-Left(U)/ Edge Cover- Right (U1) to Lintel (E1/E2) with Bolt\Flat Washer
See Fig.19.
Fig.21
Q
CC
CC
Q
Q
A
CC
C
U1
U
E2 E1
U2
E3
A
CC
C
Q1
Q1
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
16
AA

Fig.22 Fig.23
II
II
II
Your gazebo is now completely assembled.
3-d.Hang Mosquito Net (S) on the Hanger (HH). See Fig.22.
3-e.Adjust position of gazebo and anchor posts to the ground by inserting Stakes (II) into each hole in
each Base Plate. See Fig.23.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
17
S
HH
E1/E2/E3
S

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
18
KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in
continuous contact with any flame source. The application of any foreign substance to
the tent fabric may render the flame-resistant properties ineffective.
Danger
• DO NOT use or enter the gazebo under harsh weather (e.g. thunderstorms,
high winds, hail, heavy snow etc.). In these conditions, it might tip over and could
cause serious injury to bystanders. Any damage or injury caused by these conditions
is not covered by the warranty.
• DO NOT install the gazebo adjacent to trees or a sloped roof. Snow and ice may
slide onto the gazebo and cause it to collapse.
• DO NOT use or enter the gazebo if there exist any of the following or of similar
conditions:
1. visible movement of support members, roofing panels or sagging roofline.
2. cracks, fractures or malformation of support member or roof panels.
3. damaged or missing fasteners.
• DO NOT hang any weights on the roof frame.
• DO NOT use ladder leaning against the gazebo or climbing onto the roof.
• Keep away from heat or flame source.
• If the gazebo will not be used for a long period of time (e.g. during winter time),
disassemble and store it in a clean, dry location.
Care&Use Instructions
• Our steel components for gazebo and garden accessories are treated with
rust inhibiting paint that protects it from rusting. However, due to the nature of steel,
surface oxidation (rusting) will occur if these protective coatings are scratched.
This is not a defect and thus not covered by the warranty.
To minimize this condition, we recommend care when assembling & handling the
product to prevent scratching the paint. Should any scratching or damage occur, we
recommend immediate touch-up with rust inhibiting paint.
Surface rust can also be easily removed with a very light application of regular
cooking oil. If surface oxidation (rusting) occurs and if no preventive measure is taken,
the oxidation may start dripping onto deck or patio and caused damaging stains,
which may be difficult to remove.
This damage can be prevented if the above-mentioned measures are taken to keep the
gazebo’s frame from oxidizing.
• Do not use bleach, acid, or other abrasive cleaners on the roof or frame parts.
• Keep instruction manual for future reference.
• Keep the original packaging to store the gazebo.
WARNING

AA M6*15 15
BB Bolt Plastic Washer
M6*25
Bolt Plastic Washer
M6*35
5
CC
Bolt\Flat Washer\Nut
M6*55
Bolt M6*15
DD
2
2
2
FF
Spacer 3
GG
Hanger 5
HH
Spare Parts
Bolt\Flat Washer
Distributed by Sam’s West Inc.
2101 SE Simple Savings Dr.
Bentonville, Arkansas 72716-0745
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
19
This product component has a 1 year guarantee against defects in material
and/or workmanship. If you have any questions regarding the warranty or spare
/ replacement parts, please call our toll-free number
1-800-847-7508 or email
us at
[email protected]
NOTE: Please consider recycling all applicable packaging material.
Warranty Information

Need Assistance? Visit us at: samsclub.com/membersmarkhelp
20
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
MADE IN CHINA