Members Mark Lancaster GC-8976-5PC User manual

Lancaster 5pc Fire Chat Set
Model Number: GC-8976-5PC
Assembly Manual
DANGER:
FIRE OR EXPLOSION HAZARA
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, leave the area immediately.
4. After leaving the area, call your gas supplier or fire depatment.
Failure to follow these instructions could result in fire or explosion, which could cause
property damage, personal injury, or death.
Do not store or use gasoline or other flammable liquids vapors and liquids, in the vicinity of
this or any other appliance.
WARNING:
An LP cylinder not connected for use shall not be stored in the vicinity of this or any
other appliance.
For Outdoor Use Only.
WARNING:
CARBON MONOXIDE HAZARD
This appliance can produce carbon monoxide which has no odor.
Using it in an enclosed space can kill you.
Never use this appliance in an enclosed space such as a camper,
tent, car or home.
DANGER
Installation and service must be performed by a qualified installer, service agency, or the gas supplier.
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
WARNING: If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage, personal injury, or loss of life.

Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, do not dispose of any
packaging or contents of the shipping carton until assembly is complete.
Use the parts and hardware lists below to identify and separate each of the
pieces included.
The use of power tools for assembly is not recommended. Power tools can
damage the hardware and/or split the wood.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow
these instructions may cause the bolts to misalign during assembly.
Dust often and use a vacuum cleaner crevice tool to clean seams. To maintain
the leather appearance, gently clean soiled areas with a soft cloth dampened
with a mild, water based detergent. Remove all lather and wipe with a clean
damp cloth. Dry with another soft cloth by blotting the damp surface (do not
rub).
Do not place furniture in direct sunlight and keep furniture at least 60 cm / 2 ft
from heat sources to avoid fading.
Before Assembly
Care and Cleaning
Important Safety Information
Please read all instructions carefully before assembling this furniture.
For your safety, assembly by two or more adults is strongly recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.
NOTICE: To prevent injury and property damage from unexpected tipping of
furniture, we highly recommend installation of the anti-tip kit included with this
product.

Need Assistance? Call us at 1-888-691-2824 from 8am to 5pm CST Monday-Friday
Components
A.......Table top.......1
B.......Table base....1
Hardware
(D)
Hex Head Bolt
M6x20mm
Qty: 4
(E)
Washer
Qty: 4
(F)
Hex Wrench
Qty: 1
A
C......Burner Cover.....1
G.......8kg Glass beads......1BCG

Carefully place the table top (A) upside down on a non-abrasive surface.
Assemble the table base(B) to the table top(A) with bolts (D) and washer (E) by using
Allen wrench (F).
Tighten all bolts with Allen wrench.the hex bolts until assembling is completed
Step 1
Need Assistance? Call us at 1-888-691-2824 from 8am to 5pm CST Monday-Friday
(D)
Hex Head Bolt
M6x20mm
Qty: 4
(E)
Washer
Qty: 4
(F)
Hex Wrench
Qty: 1

Place Burner Cover onto the fire bowl.
NOTE: Glass beads is not included. When the fire pit is not in use and has cooled
COMPLETELY, cover it with the Burner Cover. DO NOT USE BURNER COVER ON A
HOT FIRE PIT OR WHEN IN USE.
Step 2
Need Assistance? Call us at 1-888-691-2824 from 8am to 5pm CST Monday-Friday
Carefully Place the glass beads (G) around the burner.
Step 3

Need Assistance? Call us at 1-888-691-2824 from 8am to 5pm CST Monday-Friday
Loading the propane
Open the door
Carefully place the cylinder into the tank rack. Tighten the bolt to hold the cylinder in
place

Need Assistance? Call us at 1-888-691-2824 from 8am to 5pm CST Monday-Friday
•Children and adults should be alerted to the hazards of high surface temperatures and
should stay away to avoid burns or prevent clothing ignition.
•Young children should be carefully supervised when they are in the area of the appliance.
•Clothing or other fiammable materials should not be hung from the appliance or placed on
or near the appliance.
•Any guard or other protective device removed for servicing the appliance must be replaced
prior to operating the appliance.
Installation and repair should be done by a qualified service person. The appliance should be
inspected before use and at least annually by a qualified service person. More frequent
cleaning may be required as necessary. It is imperative that the control compartment, burners,
and circulating air passageways of the appliance are kept clean.
r. Immediately call a qualified
technician to inspect the appliance and to replace any part of the control system and any gas
control which has been under water.
P gas supply cylinder to be used must be constructed and marked in accordance with the
P Transportation (DOT). See page
16.
The cylinder supplies system must be arranged for vapor withdrawal and the cylinder must
include a collar to protect the cylinder valve.
P gas cylinders.
The burner must be replaced prior to the appliance being put into operation if it is evident that
the burner is damaged. The replacement burner must be the same as the part specified by
manufacturer.
To clean the appliance including the burner, please refer to Cleaning and Clearing on
ng off the gas appliance or
We recommend you not using the gas appliance in strong wind and/or heavy rain.
they will get broken.
Safety Warning
page 17
CAUTION
CAUTION

Need Assistance? Call us at 1-888-691-2824 from 8am to 5pm CST Monday-Friday
.
.
Safety Warning
When the appliance is connected to a fixed-gas system, the installation must conform with
local codes, or in the absence of local codes with the National Fuel Gas Code, ANS Z223.1
/NFPA54; International Fuel Gas Code, Natural Gas and Propane Installation Code, CSA B149.1;
or Propane Storage and Handling Code, B149.2, as applicable.
The LP gas supply cylinder used must be:
noitatropsnarTfotnemtrapeD.S.UehthtiwecnadroccanidekramdnadetcurtsnoC.1
(D.O.T.) Specifications for LP Gas Cylinders, or the Standard for Cylinders, Spheres and
933B-ASC/NAC,noissimmoCdnasdooGsuoregnaDfonoitatropsnarTrofsebuT
as applicable.
2. Provided with a listed overfill prevention device.
3. Provided with cylinder connection device compatible with the connection for the appliance.
•
•
•
•
•
•
•
•
•
•
Always place the appliance on a firm and level surface.
Solid fuels shall not be burned in this gas appliance.
The appliance shall be used only outdoors in a well-ventilated space and shall not be used
in a building, garage or any other enclosed area.
When in use, keep the appliance area clear and at least side-48" (121.9cm) and top-72” (182.9cm)
from combustible materials, gasoline and other fiammable liquid and vapors.
Do not use the appliance under combustible surfaces. Certain items or materials, when stored
under the appliance or nearby, will be subjected to radiant heat and could be damaged.
Inspect the hose assembly and burner prior to each use. If there is evidence of excessive
abrasion or wear, or if the hose or burner is damaged, it must be replaced by an appropriate
part from the manufacturer.
Inspect the gas connections of the appliance prior to each use. Do not operate the unit if there is
a gas leak. Have the appliance inspected annually by a qualified service person.
The pressure regulator and hose assembly provided with the appliance must be used.
The replacement part must be the same as specified by the manufacturer.
•To attach the LP gas cylinder please refer to the Gas Connection section onpage 14 and
perform the leak test on page 15.
CAUTION
CAUTION
CAUTION

Need Assistance? Call us at 1-888-691-2824 from 8am to 5pm CST Monday-Friday
Loading the battery
3#
2#
P
U
S
H
Unscrew the battery box, insert the negative electrode side of the battery into the
bottom of the battery box
Note: Please follow the above instructions to replace the battery when needed.
Gas connection
5# 4#
Fig.7
Connect the pressure regulator (4#) to the cylinder by rotating the knob(5#) clockwise until
it is fully secured.
Make sure there is no leakage or damage.
Close the laft access door and lock it in position with the plastic lock (1#).
IMPORTANT:
If the knob (5#) is not properly threaded to the outlet of the cylinder. Gas leak will
possibly occur.

Need Assistance? Call us at 1-888-691-2824 from 8am to 5pm CST Monday-Friday
Leak Check
WARNING
Do not use an open flame to check for leaks.
Do not smoke during testing.
Do not test indoors.
A leak check must be performed whenever the gas cylinder is replaced.
NOTE
1. Make sure the gas cntrol knob (2#) is on the “OFF” position. Open access doors.
2. Make sure the gas cylinder is correctly and securaly connected to the pressure
requlator, with a tight fit.
3. Turn on the gas cylinder valve(7#). Apply 50% soap and 50% water solution to the
gas hose at connections between the knob(5#) and the gas cylinder.
4. If there is a leak, you will see bubbles form. In the case of the leak, turn off the
gas supply, unscrew the connections. Reconnect the gas hose and retest. If the
leak persists, consult the customer sarvice canter for assistance.
5. If the connection is sound, continue to the next step.
LIGHTING
1. Make sure control knob (2#) is on the “OFF” position on the contral panel.
2. Open access doors. Turn on gas cylinder valve (7#) to fully opened position.
3. Push and turn the knob (2#) to “HEGH”.
4. Hold ignitor (3#) to light the burner. Release the knob afer 45 seconds.
If there is no fire turn the control knob to “OFF”, wait 5 minutes and repeat from
step 3 on.
5. Adjust flame to desired flame with the control knob.
Fig. 12
7#
Fig. 13
Fig. 11
P
U
S
H
P
U
S
H
2#
2# 3#
5#
OFF
HIGH
LOW
HIGH
OFF
LOW
WARNING
Do not operate if there is a kink in the flexible gas hose as this could lead to a gas leak.
WARNING
Lighting the appliance improperly could lead to an unsafe condition.

Need Assistance? Call us at 1-888-691-2824 from 8am to 5pm CST Monday-Friday
WARNING
SHUTTING DOWN THE GAS
1. Turn the gas control knob (2#) to “OFF” to shut down applianca.
2. Turn the gas cylinder valve (7#) off when the gas appliance will not be in use.
Do not try to cool glass beads with cold water right after shutting down the
gas apploance or they will get crack.
Do not allow children to play with glass beads,

Need Assistance? Call us at 1-888-691-2824 from 8am to 5pm CST Monday-Friday
(Note : Cylinder is not included in this unit.)
20lb QCC OPD Barbecue Tank
Diameter: 12.125 in. / 308 mm
Height: 17.625 in. / 447.8 mm
TW (Tare Weight): 16.6 lbs
WC (Water Capacity): 47.6 lbs
Other cylinders may be acceptable for use with the appliance
provided they are compatible with the appliance retention means;
provided with a listed overfilling prevention device; and
provided with a cylinder connection device compatible with the
connection for the appliance.
12.125 in.
308 mm
17.625 in.
447.8 mm
Gas Cylinder Required